[U-Boot] SPL binary too large for OMAP4460 OCM

[Sricharan R]

On Wednesday 04 September 2013 01:01 PM, bin4ry wrote:
> Hi everybody,
>
> I need to add functionality to the SPL code. I tried to implement in a
> memory-saving way, however, the SPL is about 45 kB after compilation. To
> get compilation working, I had to set CONFIG_SPL_MAX_SIZE to (45 *
> 1024). Now, the SPL as well as u-boot won't boot. After the device'
> (PandaBoard ES - OMAP4460) reset, nothing happens regarding it's output
> on terminal.
>
> My question: is it theoretically possible to to establish a successfully
> booting SPL with ~45 kB in size for this device? The device'
> on-chip-memory is 56kB so it could fit in there. If so, what needs to be
> configured / tuned to get it working? Are there any other features I
> could omit from the binary to make it smaller?
>
> Thanks a lot,
> -b
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
 Do you have a Secure device or GP ?

Regards,
 Sricharan