[U-Boot] [PATCH v1 0/2] arm, da85x: updates for the ipam390 board
Heiko Schocher
hs at denx.de
Thu Sep 5 07:14:03 CEST 2013
enable the RBL/UBL ECC layout through
CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC define
see for more info:
http://processors.wiki.ti.com/index.php/DM365_Nand_ECC_layout
and use this on the ipam390 board. Also do some minor changes
for this board:
- update default environment
- change A2CR to correct value for UART boot mode
- adapt cs3cfg timings for nand
- change LED bootmode signalization
Heiko Schocher (2):
nand, davinci: add special UBL ecc position
arm, da85x: update for the ipam390 board
board/Barix/ipam390/ipam390-ais-uart.cfg | 2 +-
board/Barix/ipam390/ipam390.c | 29 ++++++++------------------
drivers/mtd/nand/davinci_nand.c | 10 +++++++++
include/configs/ipam390.h | 35 ++++++++++++++++++++------------
4 Dateien geändert, 42 Zeilen hinzugefügt(+), 34 Zeilen entfernt(-)
Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Scott Wood <scottwood at freescale.com>
--
1.7.11.7
More information about the U-Boot
mailing list