[U-Boot] [PATCH v2 11/11] mpc85xx: introduce the kmp204x reference design support

[York Sun]

On 08/28/2013 07:04 AM, Valentin Longchamp wrote:
> This patch introduces the support for Keymile's kmp204x reference
> design. This design is based on Freescale's P2040/P2041 SoC.
> 
> The peripherals used by this design are:
> - DDR3 RAM with SPD support
> - SPI NOR Flash as boot medium
> - NAND Flash
> - 2 PCIe busses (hosts 1 and 3)
> - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
> - 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt
>   FPGA
> - 2 HW I2C busses
> - last but not least, the mandatory serial port
> 
> The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb
> support and was changed according to our design (that means essentially
> removing what is not present on the designs and a few adaptations).
> 
> There is currently only one prototype board that is based on this design
> and this patch also introduces it. The board is called kmlion1.
> 
> Signed-off-by: Stefan Bigler <stefan.bigler at keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> ---
> Changes in v2:
> - Remove patch "5/8 fsl: do not define FSL_SRIO_PCIE_BOOT_MASTER for all
>   P2041 systems" from the series as it is not needed with current u-boot.
> - fix the defines used in kmp204x/law.c for the lbus local address
>   windows.
> - fix the header files to include Freescale's copyrights
> - integrate Scott's feedback
> 
>
Please use the new license header string.

York