[U-Boot] [PATCH v4] at91: add support for CDU9G25 board
Jiri Prchal
jiri.prchal at aksignal.cz
Fri Sep 13 11:00:57 CEST 2013
This patch adds support for our companies board CDU9G25 with Atmel AT91SAM9G25, 128MB DDR2, 256MB NAND.
Signed-off-by: Jiri Prchal <jiri.prchal at aksignal.cz>
---
v.2
Fixed static IP and MAC addr cofiguration by random MAC and DHCP.
Added entry to MAINTAINERS.
Fixed line lenght, trailing spaces and other cosmetics.
v.3
Removed static eth_gadget addresses.
MAC address set from serial number of F-RAM.
v.4
Changed debug to printf if used random MAC addr, print that addr.
Keep MAC addr set in enviroment.
MAINTAINERS | 3 +
board/cdu9g25/Makefile | 34 +++++++
board/cdu9g25/cdu9g25.c | 204 ++++++++++++++++++++++++++++++++++++++++++
board/cdu9g25/config.mk | 1 +
boards.cfg | 1 +
include/configs/cdu9g25.h | 216 +++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 459 insertions(+)
create mode 100644 board/cdu9g25/Makefile
create mode 100644 board/cdu9g25/cdu9g25.c
create mode 100644 board/cdu9g25/config.mk
create mode 100644 include/configs/cdu9g25.h
diff --git a/MAINTAINERS b/MAINTAINERS
index bd0f3a0..9d0008a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -851,6 +851,9 @@ Matt Porter <mporter at ti.com>
ti814x_evm ARM ARMV7 (TI814x Soc)
+Jiri Prchal <jiri.prchal at aksignal.cz>
+ cdu9g25 ARM926EJS (AT91SAM9G25 SoC)
+
Dave Purdy <david.c.purdy at gmail.com>
pogo_e02 ARM926EJS (Kirkwood SoC)
diff --git a/board/cdu9g25/Makefile b/board/cdu9g25/Makefile
new file mode 100644
index 0000000..b644a83
--- /dev/null
+++ b/board/cdu9g25/Makefile
@@ -0,0 +1,34 @@
+#
+# U-boot - Makefile
+#
+# (C) Copyright 2013
+# Jiri Prchal <jiri.prchal at aksignal.cz>
+# AK signal <www.aksignal.cz>
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += cdu9g25.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/cdu9g25/cdu9g25.c b/board/cdu9g25/cdu9g25.c
new file mode 100644
index 0000000..c7e78e3
--- /dev/null
+++ b/board/cdu9g25/cdu9g25.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2013
+ * Jiri Prchal <jiri.prchal at aksignal.cz>
+ * AK signal <www.aksignal.cz>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9x5_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_spi.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <atmel_hlcdc.h>
+#include <atmel_mci.h>
+#include <spi.h>
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void cdu9g25_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ writel(csa, &matrix->ebicsa);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(6),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(1),
+ &smc->cs[3].mode);
+
+ writel(1 << ATMEL_ID_PIOCD, &pmc->pcer);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+
+ at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
+ at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
+ at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */
+ at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ debug("spi_cs_is_valid: bus=%u cs=%u\n", bus, cs);
+ if (bus < 2 && cs < 4)
+ return 1;
+ return 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ debug("spi_cs_activate: bus=%u cs=%u\n", slave->bus, slave->cs);
+ at91_set_pio_output(AT91_PIO_PORTA, 23, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ debug("spi_cs_deactivate: bus=%u cs=%u\n", slave->bus, slave->cs);
+ at91_set_pio_output(AT91_PIO_PORTA, 23, 1);
+}
+
+void cdu9g25_spi0_hw_init(void)
+{
+ at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
+
+ at91_set_pio_output(AT91_PIO_PORTA, 23, 1);
+}
+
+void cdu9g25_init_enetaddr(void)
+{
+ struct spi_slave *slave;
+ uchar sernum[9];
+ int ret;
+
+ if (eth_getenv_enetaddr("ethaddr", sernum))
+ return;
+
+ slave = spi_setup_slave(0, 3, 1000000, SPI_MODE_0);
+ if (!slave) {
+ debug("Failed to set up FRAM slave\n");
+ goto err_spi_setup_slave;
+ }
+
+ ret = spi_claim_bus(slave);
+ if (ret) {
+ debug("Failed to claim SPI bus: %d\n", ret);
+ goto err_spi_claim_bus;
+ }
+
+ *sernum = 0xc3; /* opcode to read serial number */
+ ret = spi_xfer(slave, sizeof(sernum) * 8, sernum, sernum,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ if (ret) {
+ debug("Failed to read serial#: %d\n", ret);
+ goto err_spi_xfer;
+ }
+
+ memmove(sernum + 1, sernum + 3, 6);
+ *sernum = 0x02;
+
+err_spi_xfer:
+ spi_release_bus(slave);
+err_spi_claim_bus:
+ spi_free_slave(slave);
+err_spi_setup_slave:
+ if (!is_valid_ether_addr(sernum)) {
+ eth_random_enetaddr(sernum);
+ printf("Using random MAC address %pM\n", sernum);
+ }
+ eth_setenv_enetaddr("ethaddr", sernum);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+ cdu9g25_init_enetaddr();
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
+ return rc;
+}
+
+static void cdu9g25_led_init(void)
+{
+ at91_set_gpio_output(CONFIG_LED_B, 1);
+ at91_set_gpio_value(CONFIG_LED_B, 0);
+}
+
+int board_early_init_f(void)
+{
+ at91_seriald_hw_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ /* arch number of AT91SAM9X5EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ cdu9g25_led_init();
+
+ cdu9g25_nand_hw_init();
+
+ cdu9g25_spi0_hw_init();
+
+ at91_macb_hw_init();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+}
+#endif
+
diff --git a/board/cdu9g25/config.mk b/board/cdu9g25/config.mk
new file mode 100644
index 0000000..528ed4a
--- /dev/null
+++ b/board/cdu9g25/config.mk
@@ -0,0 +1 @@
+CONFIG_SYS_TEXT_BASE = 0x27f00000
diff --git a/boards.cfg b/boards.cfg
index be810c7..572d20d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -77,6 +77,7 @@ integratorcp_cm926ejs arm arm926ejs integrator armltd
aspenite arm arm926ejs - Marvell armada100
gplugd arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
+cdu9g25 arm arm926ejs - - at91
at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0
at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1
at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
diff --git a/include/configs/cdu9g25.h b/include/configs/cdu9g25.h
new file mode 100644
index 0000000..d5eb992
--- /dev/null
+++ b/include/configs/cdu9g25.h
@@ -0,0 +1,216 @@
+/*
+ * (C) Copyright 2013
+ * Jiri Prchal <jiri.prchal at aksignal.cz>
+ * AK signal <www.aksignal.cz>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#define CONFIG_AT91SAM9X5
+#include <asm/hardware.h>
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */
+#define CONFIG_SYS_HZ 1000
+
+/* Define actual evaluation board type from used processor type */
+#define CONFIG_CDU9G25
+#define CONFIG_AT91FAMILY
+#define CONFIG_IDENT_STRING "_cdu9g25"
+
+/* Misc CPU related */
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
+
+/* LEDs */
+#define CONFIG_LED_R AT91_PIN_PB18
+#define CONFIG_LED_G AT91_PIN_PB16
+#define CONFIG_LED_Y AT91_PIN_PB14
+#define CONFIG_LED_B AT91_PIN_PB12
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_BOOT_RETRY_TIME 600
+
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_AT91SAM9_WATCHDOG
+
+/* SPI */
+#define CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SPI
+
+/* RAMTRON FRAM */
+#define CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI0 /* SPI used for FRAM is SPI0 */
+#define CONFIG_SPI_FLASH /* RAMTRON FRAM on SPI bus */
+#define CONFIG_SPI_FRAM_RAMTRON
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+
+/*
+ * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024\
+ - GENERATED_GBL_DATA_SIZE)
+
+/* no NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* NAND flash */
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
+
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC 1
+#define CONFIG_ATMEL_NAND_HW_PMECC 1
+#define CONFIG_PMECC_CAP 8
+#define CONFIG_PMECC_SECTOR_SIZE 512
+#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_NAND_TRIMFFS
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:256k(bootstrap),"\
+ "768k(uboot),256k(ubootenv),"\
+ "4864k(kernel),"\
+ "-(root)"
+
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/* FAT */
+#ifdef CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_RANDOM_MACADDR
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
+#else
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9x5"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
+#endif
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_STORAGE
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_TEXT_BASE
+
+/* CONFIG_SYS_USE_NANDFLASH */
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_SIZE 0x10000 /* 1 sector = 128kB */
+#define CONFIG_ENV_RANGE 0x20000 /* 2 sectors for bad sector handling */
+#define CONFIG_BOOTCOMMAND "nand read 21000000 kernel; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 ubi.mtd=root "\
+ "root=ubi0:root rootfstype=ubifs rw"
+#define CONFIG_SERVERIP 10.0.1.1
+#define CONFIG_BOOTFILE "kernel_cdu9g25"
+#define CONFIG_PREBOOT "mtdparts default" /* for partitions */
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)\
+ + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + CONFIG_ENV_SIZE)
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
--
1.7.9.5
More information about the U-Boot
mailing list