[U-Boot] [PATCH 3/4] dumpimage: Added a tool to extract "data files" from U-Boot multifile images
guilherme.maciel.ferreira at gmail.com
guilherme.maciel.ferreira at gmail.com
Wed Sep 18 02:42:16 CEST 2013
From: Guilherme Maciel Ferreira <guilherme.maciel.ferreira at gmail.com>
Given a multifile image created through the mkimage's -d option:
$ mkimage -A x86 -O linux -T multi -n x86 -d vmlinuz:initrd.img:System.map \
multi.img
Image Name: x86
Created: Thu Jul 25 10:29:13 2013
Image Type: Intel x86 Linux Multi-File Image (gzip compressed)
Data Size: 13722956 Bytes = 13401.32 kB = 13.09 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 4040128 Bytes = 3945.44 kB = 3.85 MB
Image 1: 7991719 Bytes = 7804.41 kB = 7.62 MB
Image 2: 1691092 Bytes = 1651.46 kB = 1.61 MB
It is possible to perform the converse operation -- extracting any file from
the image -- by using the dumpimage's -i option:
$ dumpimage -i multi.img -p 2 System.map
Although it's feasible to retrieve "data files" from image through scripting,
the requirement to embed tools such 'dd', 'awk' and 'sed' for this sole purpose
is cumbersome and unreliable -- once you must keep track of file sizes inside
the image. Furthermore, extracting data files using "dumpimage" tool is faster
than through scripting.
Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira at gmail.com>
---
Makefile | 1 +
README | 9 ++
tools/.gitignore | 1 +
tools/Makefile | 26 ++++
tools/default_image.c | 55 +++++++++
tools/dumpimage.c | 318 +++++++++++++++++++++++++++++++++++++++++++++++++
tools/dumpimage.h | 33 +++++
tools/imagetool.h | 11 ++
8 files changed, 454 insertions(+), 0 deletions(-)
create mode 100644 tools/dumpimage.c
create mode 100644 tools/dumpimage.h
diff --git a/Makefile b/Makefile
index 28ddb7e..c9b6c4d 100644
--- a/Makefile
+++ b/Makefile
@@ -866,6 +866,7 @@ clean:
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
+ $(obj)tools/dump{env,}image \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/mk{$(BOARD),}spl \
$(obj)tools/mxsboot \
diff --git a/README b/README
index ccd47fa..da1c1e8 100644
--- a/README
+++ b/README
@@ -5097,6 +5097,15 @@ when your kernel is intended to use an initial ramdisk:
Load Address: 0x00000000
Entry Point: 0x00000000
+The "dumpimage" is a tool to disassemble images built by mkimage. Its "-i"
+option performs the converse operation of the mkimage's second form (the "-d"
+option). Given an image built by mkimage, the dumpimage extracts a "data file"
+from the image:
+
+ tools/dumpimage -i image -p position data_file
+ -i ==> extract from the 'image' a specific 'data_file', \
+ indexed by 'position'
+
Installing a Linux Image:
-------------------------
diff --git a/tools/.gitignore b/tools/.gitignore
index a7fee26..2320fd8 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -3,6 +3,7 @@
/gen_eth_addr
/img2srec
/kwboot
+/dumpimage
/mkenvimage
/mkimage
/mpc86x_clk
diff --git a/tools/Makefile b/tools/Makefile
index 4936d54..ea9e51a 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -50,6 +50,7 @@ BIN_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc$(SFX)
BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX)
BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
+BIN_FILES-y += dumpimage$(SFX)
BIN_FILES-y += mkenvimage$(SFX)
BIN_FILES-y += mkimage$(SFX)
BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX)
@@ -72,6 +73,7 @@ EXT_OBJ_FILES-y += lib/sha1.o
# Source files located in the tools directory
NOPED_OBJ_FILES-y += aisimage.o
NOPED_OBJ_FILES-y += default_image.o
+NOPED_OBJ_FILES-y += dumpimage.o
NOPED_OBJ_FILES-y += fit_image.o
NOPED_OBJ_FILES-y += image-host.o
NOPED_OBJ_FILES-y += imximage.o
@@ -200,6 +202,30 @@ $(obj)xway-swap-bytes$(SFX): $(obj)xway-swap-bytes.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
+$(obj)dumpimage$(SFX): $(obj)aisimage.o \
+ $(FIT_SIG_OBJS) \
+ $(obj)crc32.o \
+ $(obj)default_image.o \
+ $(obj)fit_image.o \
+ $(obj)image-fit.o \
+ $(obj)image.o \
+ $(obj)image-host.o \
+ $(obj)imagetool.o \
+ $(obj)imximage.o \
+ $(obj)kwbimage.o \
+ $(obj)dumpimage.o \
+ $(obj)md5.o \
+ $(obj)mxsimage.o \
+ $(obj)omapimage.o \
+ $(obj)os_support.o \
+ $(obj)pblimage.o \
+ $(obj)sha1.o \
+ $(obj)ublimage.o \
+ $(LIBFDT_OBJS) \
+ $(RSA_OBJS)
+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ $(HOSTLIBS)
+ $(HOSTSTRIP) $@
+
$(obj)mkenvimage$(SFX): $(obj)crc32.o $(obj)mkenvimage.o \
$(obj)os_support.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
diff --git a/tools/default_image.c b/tools/default_image.c
index 9211c68..b0a0d40 100644
--- a/tools/default_image.c
+++ b/tools/default_image.c
@@ -117,6 +117,60 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd,
image_set_hcrc(hdr, checksum);
}
+static int image_save_datafile (struct image_tool_params *params,
+ ulong file_data, ulong file_len)
+{
+ int dfd;
+ const char *datafile = params->datafile;
+
+ dfd = open (datafile, O_RDWR|O_CREAT|O_BINARY, S_IRUSR|S_IWUSR);
+ if (dfd < 0) {
+ fprintf (stderr, "%s: Can't open \"%s\": %s\n",
+ params->cmdname, datafile, strerror(errno));
+ return -1;
+ }
+
+ if (write (dfd, (void *)file_data, file_len) != (ssize_t)file_len) {
+ fprintf (stderr, "%s: Write error on \"%s\": %s\n",
+ params->cmdname, datafile, strerror(errno));
+ close (dfd);
+ return -1;
+ }
+
+ close (dfd);
+
+ return 0;
+}
+
+static int image_extract_datafile (void *ptr, struct image_tool_params *params)
+{
+ const image_header_t *hdr = (const image_header_t *)ptr;
+
+ if (image_check_type (hdr, IH_TYPE_MULTI)) {
+ ulong idx = params->pflag;
+ ulong count;
+ ulong file_data = 0;
+ ulong file_len = 0;
+
+ /* get the number of data files present in the image */
+ count = image_multi_count (hdr);
+
+ /* retrieve the "data file" at the idx position */
+ image_multi_getimg (hdr, idx, &file_data, &file_len);
+
+ if ((file_len == 0) || (idx >= count)) {
+ fprintf (stderr, "%s: No such data file %ld in \"%s\"\n",
+ params->cmdname, idx, params->imagefile);
+ return -1;
+ }
+
+ /* save the "data file" into the file system */
+ return image_save_datafile (params, file_data, file_len);
+ }
+
+ return -1;
+}
+
/*
* Default image type parameters definition
*/
@@ -128,6 +182,7 @@ static struct image_type_params defimage_params = {
.verify_header = image_verify_header,
.print_header = image_print_contents,
.set_header = image_set_header,
+ .extract_datafile = image_extract_datafile,
.check_params = image_check_params,
};
diff --git a/tools/dumpimage.c b/tools/dumpimage.c
new file mode 100644
index 0000000..cb5cb44
--- /dev/null
+++ b/tools/dumpimage.c
@@ -0,0 +1,318 @@
+/*
+ * Based on mkimage.c.
+ *
+ * Written by Guilherme Maciel Ferreira <guilherme.maciel.ferreira at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "dumpimage.h"
+#include <image.h>
+#include <version.h>
+
+static void usage(void);
+
+/* image_type_params linked list to maintain registered image types supports */
+static struct image_type_params *dumpimage_tparams = NULL;
+
+/* parameters initialized by core will be used by the image type code */
+static struct image_tool_params params = {
+ .type = IH_TYPE_KERNEL,
+};
+
+/*
+ * dumpimage_register -
+ *
+ * It is used to register respective image generation/list support to the
+ * dumpimage core
+ *
+ * the input struct image_type_params is checked and appended to the link
+ * list, if the input structure is already registered, issue an error
+ */
+static void
+dumpimage_register (struct image_type_params *tparams)
+{
+ struct image_type_params **tp;
+
+ if (!tparams) {
+ fprintf (stderr, "%s: %s: Null input\n",
+ params.cmdname, __FUNCTION__);
+ exit (EXIT_FAILURE);
+ }
+
+ /* scan the linked list, check for registry and point the last one */
+ for (tp = &dumpimage_tparams; *tp != NULL; tp = &(*tp)->next) {
+ if (!strcmp((*tp)->name, tparams->name)) {
+ fprintf (stderr, "%s: %s already registered\n",
+ params.cmdname, tparams->name);
+ return;
+ }
+ }
+
+ /* add input struct entry at the end of link list */
+ *tp = tparams;
+ /* mark input entry as last entry in the link list */
+ tparams->next = NULL;
+
+ debug ("Registered %s\n", tparams->name);
+}
+
+/*
+ * dumpimage_get_type -
+ *
+ * It scans all registered image types and
+ * checks the input type_id for each supported image type
+ *
+ * if successful,
+ * returns respective image_type_params pointer if success
+ * if input type is not supported by any of registered image types,
+ * returns NULL
+ */
+static struct image_type_params *
+dumpimage_get_type (int type)
+{
+ struct image_type_params *curr;
+
+ for (curr = dumpimage_tparams; curr != NULL; curr = curr->next) {
+ if (curr->check_image_type) {
+ if (!curr->check_image_type (type))
+ return curr;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * dumpimage_verify_print_header -
+ *
+ * It scans registered image types,
+ * verifies image_header for each supported image type
+ * if verification is successful, prints respective header
+ *
+ * returns negative if input image format does not match with any of
+ * supported image types
+ */
+static int
+dumpimage_verify_print_header (void *ptr, struct stat *sbuf)
+{
+ int retval = -1;
+ struct image_type_params *curr;
+
+ for (curr = dumpimage_tparams; curr != NULL; curr = curr->next ) {
+ if (curr->verify_header) {
+ retval = curr->verify_header (
+ (unsigned char *)ptr, sbuf->st_size,
+ ¶ms);
+
+ if (retval == 0) {
+ /*
+ * Print the image information
+ * if verify is successful
+ */
+ if (curr->print_header)
+ curr->print_header (ptr);
+ else {
+ fprintf (stderr,
+ "%s: print_header undefined for %s\n",
+ params.cmdname, curr->name);
+ }
+ break;
+ }
+ }
+ }
+ return retval;
+}
+
+/*
+ * dumpimage_extract_datafile -
+ *
+ * It scans all registered image types,
+ * verifies image_header for each supported image type
+ * if verification is successful, it extracts the desired file,
+ * indexed by pflag, from the image
+ *
+ * returns negative if input image format does not match with any of
+ * supported image types
+ */
+static int
+dumpimage_extract_datafile (void *ptr, struct stat *sbuf)
+{
+ int retval = -1;
+ struct image_type_params *curr;
+
+ for (curr = dumpimage_tparams; curr != NULL; curr = curr->next ) {
+ if (curr->verify_header) {
+ retval = curr->verify_header (
+ (unsigned char *)ptr, sbuf->st_size,
+ ¶ms);
+
+ if (retval == 0) {
+ /*
+ * Extract the file from the image
+ * if verify is successful
+ */
+ if (curr->extract_datafile)
+ curr->extract_datafile (ptr, ¶ms);
+ else {
+ fprintf (stderr,
+ "%s: extract_datafile undefined for %s\n",
+ params.cmdname, curr->name);
+ }
+ break;
+ }
+ }
+ }
+
+ return retval;
+}
+
+int
+main (int argc, char **argv)
+{
+ int ifd = -1;
+ struct stat sbuf;
+ char *ptr;
+ int retval = 0;
+ struct image_type_params *tparams = NULL;
+
+ /* Init all image generation/list support */
+ register_image_tool (dumpimage_register);
+
+ params.cmdname = *argv;
+
+ while (--argc > 0 && **++argv == '-') {
+ while (*++*argv) {
+ switch (**argv) {
+ case 'l':
+ params.lflag = 1;
+ break;
+ case 'i':
+ if (--argc <= 0)
+ usage ();
+ params.imagefile = *(++argv);
+ params.iflag = 1;
+ goto NXTARG;
+ case 'p':
+ if (--argc <= 0)
+ usage ();
+ params.pflag = strtoul (*++argv, &ptr, 10);
+ if (*ptr) {
+ fprintf (stderr,
+ "%s: invalid file position %s\n",
+ params.cmdname, *argv);
+ exit (EXIT_FAILURE);
+ }
+ goto NXTARG;
+ case 'V':
+ printf ("dumpimage version %s\n", PLAIN_VERSION);
+ exit (EXIT_SUCCESS);
+ default:
+ usage ();
+ }
+ }
+NXTARG: ;
+ }
+
+ if (argc != 1)
+ usage ();
+
+ /* set tparams as per input type_id */
+ tparams = dumpimage_get_type (params.type);
+ if (tparams == NULL) {
+ fprintf (stderr, "%s: unsupported type %s\n",
+ params.cmdname, genimg_get_type_name(params.type));
+ exit (EXIT_FAILURE);
+ }
+
+ /*
+ * check the passed arguments parameters meets the requirements
+ * as per image type to be generated/listed
+ */
+ if (tparams->check_params)
+ if (tparams->check_params (¶ms))
+ usage ();
+
+ if (params.iflag) {
+ params.datafile = *argv;
+ }
+ else {
+ params.imagefile = *argv;
+ }
+
+ ifd = open (params.imagefile, O_RDONLY|O_BINARY);
+ if (ifd < 0) {
+ fprintf (stderr, "%s: Can't open \"%s\": %s\n",
+ params.cmdname, params.imagefile,
+ strerror(errno));
+ exit (EXIT_FAILURE);
+ }
+
+ if (params.lflag || params.iflag) {
+
+ if (fstat(ifd, &sbuf) < 0) {
+ fprintf (stderr, "%s: Can't stat \"%s\": %s\n",
+ params.cmdname, params.imagefile,
+ strerror(errno));
+ exit (EXIT_FAILURE);
+ }
+
+ if ((unsigned)sbuf.st_size < tparams->header_size) {
+ fprintf (stderr,
+ "%s: Bad size: \"%s\" is not valid image\n",
+ params.cmdname, params.imagefile);
+ exit (EXIT_FAILURE);
+ }
+
+ ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, ifd, 0);
+ if (ptr == MAP_FAILED) {
+ fprintf (stderr, "%s: Can't read \"%s\": %s\n",
+ params.cmdname, params.imagefile,
+ strerror(errno));
+ exit (EXIT_FAILURE);
+ }
+
+ /*
+ * Both calls bellow scan through dumpimage registry for all supported
+ * image types and verify the input image file header for match
+ */
+
+ if (params.iflag) {
+ /*
+ * Extract the data files from within the matched image type
+ * Returns the error code if not matched
+ */
+ retval = dumpimage_extract_datafile (ptr, &sbuf);
+ }
+ else {
+ /*
+ * Print the image information for matched image type
+ * Returns the error code if not matched
+ */
+ retval = dumpimage_verify_print_header (ptr, &sbuf);
+ }
+
+ (void) munmap((void *)ptr, sbuf.st_size);
+ (void) close (ifd);
+
+ exit (retval);
+ }
+
+ (void) close (ifd);
+ exit (EXIT_SUCCESS);
+}
+
+static void
+usage (void)
+{
+ fprintf (stderr, "Usage: %s -l image\n"
+ " -l ==> list image header information\n",
+ params.cmdname);
+ fprintf (stderr, " %s -i image -p position data_file\n"
+ " -i ==> extract from the 'image' a specific 'data_file'"
+ ", indexed by 'position' (starting at 0)\n",
+ params.cmdname);
+ fprintf (stderr, " %s -V ==> print version information and exit\n",
+ params.cmdname);
+
+ exit (EXIT_FAILURE);
+}
diff --git a/tools/dumpimage.h b/tools/dumpimage.h
new file mode 100644
index 0000000..f749444
--- /dev/null
+++ b/tools/dumpimage.h
@@ -0,0 +1,33 @@
+/*
+ * Based on mkimage.c.
+ *
+ * Written by Guilherme Maciel Ferreira <guilherme.maciel.ferreira at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DUMPIMAGE_H_
+#define _DUMPIMAGE_H_
+
+#include "os_support.h"
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <time.h>
+#include <unistd.h>
+#include <sha1.h>
+#include "fdt_host.h"
+#include "imagetool.h"
+
+#undef DUMPIMAGE_DEBUG
+
+#ifdef DUMPIMAGE_DEBUG
+#define debug(fmt,args...) printf (fmt ,##args)
+#else
+#define debug(fmt,args...)
+#endif /* DUMPIMAGE_DEBUG */
+
+#endif /* _DUMPIMAGE_H_ */
diff --git a/tools/imagetool.h b/tools/imagetool.h
index 7666882..d0dd4ac 100644
--- a/tools/imagetool.h
+++ b/tools/imagetool.h
@@ -34,7 +34,9 @@ struct image_tool_params {
int dflag;
int eflag;
int fflag;
+ int iflag;
int lflag;
+ int pflag;
int vflag;
int xflag;
int skipcpy;
@@ -97,6 +99,15 @@ struct image_type_params {
void (*set_header) (void *, struct stat *, int,
struct image_tool_params *);
/*
+ * This function is used by the command to retrieve a data file from
+ * the image (i.e. dumpimage -i <image> -p <position> <data_file>). Thus,
+ * the code to extract a file from an image must be put here.
+ *
+ * Returns 0 if the file was successfully retrieved from the image,
+ * or a negative value on error.
+ */
+ int (*extract_datafile) (void *, struct image_tool_params *);
+ /*
* Some image generation support for ex (default image type) supports
* more than one type_ids, this callback function is used to check
* whether input (-T <image_type>) is supported by registered image
--
1.7.0.4
More information about the U-Boot
mailing list