[U-Boot] [PATCH 1/4] powerpc/p1010rdb: remove unused cpld_show

[Shengzhou Liu]

Function cpld_show() was for debug and not called, so clean it.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
---
 board/freescale/p1010rdb/p1010rdb.c | 35 -----------------------------------
 1 file changed, 35 deletions(-)

diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index 06aa800..42153e6 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -52,41 +52,6 @@ struct cpld_data {
 	u8 por2; /* POR Options */
 	u8 por3; /* POR Options */
 };
-
-void cpld_show(void)
-{
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
-	printf("CPLD: V%x.%x PCBA: V%x.0\n",
-		in_8(&cpld_data->cpld_ver) & 0xF0,
-		in_8(&cpld_data->cpld_ver) & 0x0F,
-		in_8(&cpld_data->pcba_ver) & 0x0F);
-
-#ifdef CONFIG_DEBUG
-	printf("twindie_ddr =%x\n",
-		in_8(&cpld_data->twindie_ddr3));
-	printf("bank_sel =%x\n",
-		in_8(&cpld_data->bank_sel));
-	printf("usb2_sel =%x\n",
-		in_8(&cpld_data->usb2_sel));
-	printf("porsw_sel =%x\n",
-		in_8(&cpld_data->porsw_sel));
-	printf("tdm_can_sel =%x\n",
-		in_8(&cpld_data->tdm_can_sel));
-	printf("tdm_can_sel =%x\n",
-		in_8(&cpld_data->tdm_can_sel));
-	printf("spi_cs0_sel =%x\n",
-		in_8(&cpld_data->spi_cs0_sel));
-	printf("bcsr0 =%x\n",
-		in_8(&cpld_data->bcsr0));
-	printf("bcsr1 =%x\n",
-		in_8(&cpld_data->bcsr1));
-	printf("bcsr2 =%x\n",
-		in_8(&cpld_data->bcsr2));
-	printf("bcsr3 =%x\n",
-		in_8(&cpld_data->bcsr3));
-#endif
-}
 #endif
 
 int board_early_init_f(void)
-- 
1.8.0