[U-Boot] [PATCH V5 02/18] usb: ehci-mx6: add support for host mode otg port
Troy Kisky
troy.kisky at boundarydevices.com
Fri Sep 27 21:47:39 CEST 2013
On 9/27/2013 10:50 AM, Marek Vasut wrote:
> Dear Troy Kisky,
>
>> Previously, only host1 was supported using an index of 0.
>> Now, otg has index 0, host1 is 1, host2 is 2, host3 is 3.
>> Since OTG requires usbmode to be set after reset, I added
>> CONFIG_EHCI_HCD_INIT_AFTER_RESET to nitrogen6x.h and
>> mx6qsabreauto.h.
>>
>> I also added a weak function board_ehci_power to handle
>> turning power on/off for otg.
>>
>> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
>>
>> ---
>> V4: new patch, replaces "usb: gadget: mv_udc: fix hardware udc address for
>> i.MX6" and has the bonus of giving OTG host mode support
>>
>> V5: use CONFIG_EHCI_HCD_INIT_AFTER_RESET instead of a weak function.
>> Return error if otg_id is high.
>> ---
>> drivers/usb/host/ehci-mx6.c | 123
>> +++++++++++++++++++++++++++------------- include/configs/mx6qsabreauto.h |
>> 3 +-
>> include/configs/nitrogen6x.h | 3 +-
>> 3 files changed, 87 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
>> index eb24af5..ff4424d 100644
>> --- a/drivers/usb/host/ehci-mx6.c
>> +++ b/drivers/usb/host/ehci-mx6.c
>> @@ -35,6 +35,7 @@
>> #define USBPHY_CTRL_CLKGATE 0x40000000
>> #define USBPHY_CTRL_ENUTMILEVEL3 0x00008000
>> #define USBPHY_CTRL_ENUTMILEVEL2 0x00004000
>> +#define USBPHY_CTRL_OTD_ID_BIT 27
> Why is this anarchism used here? Why is it not defined as the rest of the
> values? Btw. its OTG_ID_VALUE , not OTD.
Good catch on the typo!
> [...]
>
>> @@ -123,31 +156,36 @@ static int usbh1_phy_enable(void)
>> /* Power up the PHY */
>> __raw_writel(0, phy_reg + USBPHY_PWD);
>> /* enable FS/LS device */
>> - val = __raw_readl(phy_reg + USBPHY_CTRL);
>> + val = __raw_readl(phy_ctrl);
>> val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
>> - __raw_writel(val, phy_reg + USBPHY_CTRL);
>> + __raw_writel(val, phy_ctrl);
>>
>> - return 0;
>> + return (val >> USBPHY_CTRL_OTD_ID_BIT) & 1;
> See above, you can use return (val & USBPHY_CTRL_OTG_ID_VALUE); here instead.
Yes, I can do that, and also change my documentation along with it.
>
>> }
>>
>> -static void usbh1_oc_config(void)
>> +struct usbnc_regs {
>> + u32 ctrl[4]; /* otg/host1-3 */
> This won't scale. Align this with the # of controllers you claim you have here,
> why dont you?
You've lost me here. Can you post the struct you'd like to see?
>
> [...]
>
>> diff --git a/include/configs/mx6qsabreauto.h
>> b/include/configs/mx6qsabreauto.h index 5530fc6..9e48a49 100644
>> --- a/include/configs/mx6qsabreauto.h
>> +++ b/include/configs/mx6qsabreauto.h
>> @@ -23,7 +23,8 @@
>> #define CONFIG_USB_STORAGE
>> #define CONFIG_USB_HOST_ETHER
>> #define CONFIG_USB_ETHER_ASIX
>> -#define CONFIG_MXC_USB_PORT 1
>> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
>> +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
>> #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
>> #define CONFIG_MXC_USB_FLAGS 0
>>
>> diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
>> index 3454b86..2e5ae13 100644
>> --- a/include/configs/nitrogen6x.h
>> +++ b/include/configs/nitrogen6x.h
>> @@ -119,7 +119,8 @@
>> #define CONFIG_USB_HOST_ETHER
>> #define CONFIG_USB_ETHER_ASIX
>> #define CONFIG_USB_ETHER_SMSC95XX
>> -#define CONFIG_MXC_USB_PORT 1
>> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
>> +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
>> #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
>> #define CONFIG_MXC_USB_FLAGS 0
> Does this patch do two things here ? I think it does, if I'm right, split this
> board adjustment away please.
>
>
If I split this, USB will stop working between the 2 patches. The OTG
port will be initialized
instead of the main USB port, and it won't work because it requires
CONFIG_EHCI_HCD_INIT_AFTER_RESET.
BR
Troy
More information about the U-Boot
mailing list