[U-Boot] [PATCH 04/10] power: Explicitly select pmic device's bus

[Heiko Schocher]

Hello Lukasz,

Am 31.03.2014 16:36, schrieb Lukasz Majewski:
> Hi Simon,
>
>> Hi Lukasz,
>>
>> On 27 March 2014 11:33, Lukasz Majewski<l.majewski at samsung.com>
>> wrote: Hi Simon, Heiko
>>
>>> From: Aaron Durbin<adurbin at chromium.org>
>>>
>>> The current pmic i2c code assumes the current i2c bus is
>>> the same as the pmic device's bus. There is nothing ensuring
>>> that to be true. Therefore, select the proper bus before performing
>>> a transaction.
>>>
>>> Signed-off-by: Aaron Durbin<adurbin at chromium.org>
>>> Signed-off-by: Simon Glass<sjg at chromium.org>
>>> Reviewed-by: Simon Glass<sjg at chromium.org>
>>> ---
>>>
>>>   drivers/power/power_i2c.c | 4 ++++
>>>   1 file changed, 4 insertions(+)
>>>
>>> diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
>>> index ac76870..594cd11 100644
>>> --- a/drivers/power/power_i2c.c
>>> +++ b/drivers/power/power_i2c.c
>>> @@ -23,6 +23,8 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32
>>> val) if (check_reg(p, reg))
>>>                return -1;
>>>
>>> +     I2C_SET_BUS(p->bus);
>>> +
>>
>> Hadn't we had a  discussion about this explicit setting of I2C some
>> time ago? I thought that this problem was solved within the I2C
>> rework.
>>
>> Also I might be wrong, so please correct me if I'm wrong. Isn't the
>> I2C_SET_BUS() macro regarded as a obsolete after the I2C rework?
>>
>> Agreed that would be ideal, but we would have to pass the bus number
>> of the i2c_read/write() functions. I don't believe the i2c code has
>> got that far yet.
>>
>> Unfortunately it doesn't work without this patch.
>
> If Heiko doesn't object, then I won't protest.

It s okay for me, so to clarify:

Acked-by: Heiko Schocher <hs at denx.de>

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany