April 2014 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Tue Apr 1 01:10:18 CEST 2014
Ending: Wed Apr 30 23:43:49 CEST 2014
Messages: 2098

• [U-Boot] [Ac100] [PATCH v2 1/6] i2c: add slave mode support   Stephen Warren
• [U-Boot] [Ac100] [PATCH v2 1/6] i2c: add slave mode support   Andrey Danin
• [U-Boot] [Ac100] [PATCH v2 4/6] ARM: tegra: nvec: add keyboard support   Stephen Warren
• [U-Boot] [Ac100] [PATCH v2 5/6] ARM: tegra: paz00: add dtbindings for nvec   Marc Dietrich
• [U-Boot] [Ac100] [PATCH v2 5/6] ARM: tegra: paz00: add dt bindings for nvec   Stephen Warren
• [U-Boot] [Ac100] [PATCH v2 5/6] ARM: tegra: paz00: add dtbindings for nvec   Stephen Warren
• [U-Boot] [Ac100] [PATCH v2 5/6] ARM: tegra: paz00: add dtbindingsfor nvec   Marc Dietrich
• [U-Boot] [ANN] U-Boot v2014.04 released   Tom Rini
• [U-Boot] [ANN] U-Boot v2014.04 released   Albert ARIBAUD
• [U-Boot] [ANN] U-Boot v2014.04 released   Simon Glass
• [U-Boot] [ANN] U-Boot v2014.04 released   Lukasz Majewski
• [U-Boot] [ANN] U-Boot v2014.04 released   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2014.04-rc3 released   Wolfgang Denk
• [U-Boot] [BeagleBone Black] AM335x CPU frequency   Xuebing Wang
• [U-Boot] [BeagleBone Black] AM335x CPU frequency   Robert Nelson
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mpc83xx: add support for the ids8313 board   Kim Phillips
• [U-Boot] [GIT PULL] u-boot-mpc83xx: add support for the ids8313 board   Tom Rini
• [U-Boot] [half-OT] Re: Fwd: [Question] i.MX6 HIgh Assurance Boot (Secure Boot) support in U-Boot versions >= 2013   Albert ARIBAUD
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [linux-sunxi] [PATCH 3/3] net/designware: align cache invalidation on rx   Shixin Zeng
• [U-Boot] [linux-sunxi] Re: [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Ian Campbell
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Shixin Zeng
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Marek Vasut
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Marek Vasut
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Marek Vasut
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Ian Campbell
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Ian Campbell
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Ian Campbell
• [U-Boot] [PATCH 0/0][v2] powerpc: Add support 2 stage boot loader for corenet platform   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/11] Dump Orphan boards   Masahiro Yamada
• [U-Boot] [PATCH 0/11] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH 0/14] Split out code from the enormous main.c   Simon Glass
• [U-Boot] [PATCH 0/14] Split out code from the enormous main.c   Simon Glass
• [U-Boot] [PATCH 0/18] ARM zynq changes   Michal Simek
• [U-Boot] [PATCH 0/2] Add workaround for Cortex-A9 errata   nitin.garg at freescale.com
• [U-Boot] [PATCH 0/2] Add workaround for Cortex-A9 errata   Fabio Estevam
• [U-Boot] [PATCH 0/2] eMMC: support for Read Protected Memory Block (RPMB)   Pierre Aubert
• [U-Boot] [PATCH 0/2] fs:ext4: Fixes and code cleanup   Lukasz Majewski
• [U-Boot] [PATCH 0/2] i2c: sh_i2c: bugfix: i2c probe command does now work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH 0/3 v2] ARM: OMAP: replace custom sr32() by standard I/O accessors   Tom Rini
• [U-Boot] [PATCH 0/3] Add workaround for Cortex-A9 errata   nitin.garg at freescale.com
• [U-Boot] [PATCH 0/3] board:tricorder: late fixups for 2014.04   Andreas Bießmann
• [U-Boot] [PATCH 0/3] board:tricorder: late fixups for 2014.04   Tom Rini
• [U-Boot] [PATCH 0/3] cm_t54: add MAC address and env partiton handling   Dmitry Lifshitz
• [U-Boot] [PATCH 0/3] mpc83xx: add support for the ids8313 board   Heiko Schocher
• [U-Boot] [PATCH 0/3] OMAP3: support fake USB Ethernet MAC address for OMAP3 BeagleBoard-XM   Tom Rini
• [U-Boot] [PATCH 0/3] pcnet driver fixes   Paul Burton
• [U-Boot] [PATCH 0/3] pcnet driver fixes   Daniel Schwierzeck
• [U-Boot] [PATCH 0/3] pcnet driver fixes   Tom Rini
• [U-Boot] [PATCH 0/4] imx25: Add hardware support   dietho at gmx.de
• [U-Boot] [PATCH 0/4] ARM: OMAP5: add cm-t54 board support   Dmitry Lifshitz
• [U-Boot] [PATCH 0/4] ventana: Add LTC3676 PMIC support   Tim Harvey
• [U-Boot] [PATCH 0/4] vybrid/tower fixes and enhancements   Stefan Agner
• [U-Boot] [PATCH 0/4] vybrid/tower fixes and enhancements   Albert ARIBAUD
• [U-Boot] [PATCH 0/5] Do not use __DATE__ and __TIME__ anymore   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Do not use __DATE__ and __TIME__ anymore   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Do not use __DATE__ and __TIME__ anymore   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Do not use __DATE__ and __TIME__ anymore   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Do not use __DATE__ and __TIME__ anymore   Mike Frysinger
• [U-Boot] [PATCH 0/5] MIPS Malta generic board conversion   Paul Burton
• [U-Boot] [PATCH 0/5] MIPS Malta generic board conversion   Daniel Schwierzeck
• [U-Boot] [PATCH 0/5] PPC 85xx QEMU: Additional fixes   Alexander Graf
• [U-Boot] [PATCH 0/5] siemens: update and cleanup code   Samuel Egli
• [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :(   Nishanth Menon
• [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :(   Tom Rini
• [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :(   Nishanth Menon
• [U-Boot] [PATCH 0/8] kmp204x patches for 2014.07   Valentin Longchamp
• [U-Boot] [PATCH 0/8] omap3: overo: update board data   Ash Charles
• [U-Boot] [PATCH 00/11] MX6: SPL NAND support   Tim Harvey
• [U-Boot] [PATCH 00/12] MX6: SPL NAND support   Tim Harvey
• [U-Boot] [PATCH 01/10][v2] powerpc/mpc85xx: Move LAW_EN define outside of config   Prabhakar Kushwaha
• [U-Boot] [PATCH 01/11] kconfig: import Kconfig files from Linux v3.14 tag   Masahiro Yamada
• [U-Boot] [PATCH 01/11] kconfig: import Kconfig files from Linux v3.14 tag   Simon Glass
• [U-Boot] [PATCH 01/11] powerpc: remove NX823 board support   Masahiro Yamada
• [U-Boot] [PATCH 01/11] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE   Masahiro Yamada
• [U-Boot] [PATCH 01/11] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE   Nikita Kiryanov
• [U-Boot] [PATCH 01/11] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE   Stefano Babic
• [U-Boot] [PATCH 01/11] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE   Tim Harvey
• [U-Boot] [PATCH 01/11] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE   Scott Wood
• [U-Boot] [PATCH 01/11] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE   Tim Harvey
• [U-Boot] [PATCH 01/12] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE   Tim Harvey
• [U-Boot] [PATCH 01/14] Remove unnecessary use of hush header file   Simon Glass
• [U-Boot] [PATCH 01/18] ARM: zynq: Fix sparse warnings in slcr.c   Michal Simek
• [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section   Prabhakar Kushwaha
• [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section   York Sun
• [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section   Prabhakar Kushwaha
• [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section   York Sun
• [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section   Prabhakar Kushwaha
• [U-Boot] [PATCH 02/10][v2] powerpc/mpc85xx: Avoid hardcoding in SPL linker script   Prabhakar Kushwaha
• [U-Boot] [PATCH 02/11] Do not apply: tools: add genkconfig   Masahiro Yamada
• [U-Boot] [PATCH 02/11] Do not apply: tools: add genkconfig   Simon Glass
• [U-Boot] [PATCH 02/11] Do not apply: tools: add genkconfig   Masahiro Yamada
• [U-Boot] [PATCH 02/11] powerpc: remove MBX and MBX860T boards support   Masahiro Yamada
• [U-Boot] [PATCH 02/11] SPL: NAND: add support for mxs nand   Tim Harvey
• [U-Boot] [PATCH 02/11] SPL: NAND: add support for mxs nand   Stefano Babic
• [U-Boot] [PATCH 02/12] SPL: NAND: add support for mxs nand   Tim Harvey
• [U-Boot] [PATCH 02/14] Rename hush to cli_hush   Simon Glass
• [U-Boot] [PATCH 02/18] ARM: zynq: Fix sparse warning in ddrc.c   Michal Simek
• [U-Boot] [PATCH 03/10][v2] powerpc:Add support of SPL non-relocation   Prabhakar Kushwaha
• [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Stephen Warren
• [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Stephen Warren
• [U-Boot] [PATCH 03/11] MX6: provide linker script for SPL   Tim Harvey
• [U-Boot] [PATCH 03/11] MX6: provide linker script for SPL   Nikita Kiryanov
• [U-Boot] [PATCH 03/11] MX6: provide linker script for SPL   Stefano Babic
• [U-Boot] [PATCH 03/11] MX6: provide linker script for SPL   Tim Harvey
• [U-Boot] [PATCH 03/11] MX6: provide linker script for SPL   Otavio Salvador
• [U-Boot] [PATCH 03/11] powerpc: remove genietv board support   Masahiro Yamada
• [U-Boot] [PATCH 03/12] MX6: add common SPL configuration   Tim Harvey
• [U-Boot] [PATCH 03/12] MX6: add common SPL configuration   Eric Nelson
• [U-Boot] [PATCH 03/12] MX6: add common SPL configuration   Igor Grinberg
• [U-Boot] [PATCH 03/12] MX6: add common SPL configuration   Tim Harvey
• [U-Boot] [PATCH 03/14] move CLI prototypes to cli.h and add comments   Simon Glass
• [U-Boot] [PATCH 03/18] ARM: zynq: Remove sparse warnings   Michal Simek
• [U-Boot] [PATCH 04/10] power: Explicitly select pmic device's bus   Heiko Schocher
• [U-Boot] [PATCH 04/10] power: Explicitly select pmic device's bus   Heiko Schocher
• [U-Boot] [PATCH 04/10][v2] powerpc/mpc85xx:Disable non DDR LAWs before init_law   Prabhakar Kushwaha
• [U-Boot] [PATCH 04/11] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH 04/11] kconfig: add basic Kconfig files   Simon Glass
• [U-Boot] [PATCH 04/11] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH 04/11] kconfig: add basic Kconfig files   Simon Glass
• [U-Boot] [PATCH 04/11] MX6: add common SPL configuration   Tim Harvey
• [U-Boot] [PATCH 04/11] MX6: add common SPL configuration   Nikita Kiryanov
• [U-Boot] [PATCH 04/11] MX6: add common SPL configuration   Tim Harvey
• [U-Boot] [PATCH 04/11] MX6: add common SPL configuration   Nikita Kiryanov
• [U-Boot] [PATCH 04/11] MX6: add common SPL configuration   Scott Wood
• [U-Boot] [PATCH 04/11] powerpc: remove ADS860, FADS823, FADS850SAR, FADS860T support   Masahiro Yamada
• [U-Boot] [PATCH 04/12] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Tim Harvey
• [U-Boot] [PATCH 04/12] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Masahiro Yamada
• [U-Boot] [PATCH 04/14] Split out simple parser and readline into separate files   Simon Glass
• [U-Boot] [PATCH 04/18] ARM: zynq: Added efuse status register base address   Michal Simek
• [U-Boot] [PATCH 05/10][v2] driver/ifc: define nand_spl_load_image() for SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH 05/11] include: define CONFIG_SPL and CONFIG_TPL as 1   Simon Glass
• [U-Boot] [PATCH 05/11] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
• [U-Boot] [PATCH 05/11] MX6: add boot device support SPL   Tim Harvey
• [U-Boot] [PATCH 05/11] MX6: add boot device support SPL   Stefano Babic
• [U-Boot] [PATCH 05/11] MX6: add boot device support SPL   Tim Harvey
• [U-Boot] [PATCH 05/11] MX6: add boot device support SPL   Stefano Babic
• [U-Boot] [PATCH 05/11] powerpc: remove RPXClassic, RPXlite boards support   Masahiro Yamada
• [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Tim Harvey
• [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Eric Nelson
• [U-Boot] [PATCH 05/14] Add cli_ prefix to readline functions   Simon Glass
• [U-Boot] [PATCH 05/18] ARM: zynq: Do not use half memory size for ECC case   Michal Simek
• [U-Boot] [PATCH 06/10][v2] driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH 06/11] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 06/11] kconfig: switch to Kconfig   Simon Glass
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Tim Harvey
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Tim Harvey
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Nikita Kiryanov
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Stefano Babic
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Stefano Babic
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Igor Grinberg
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Stefano Babic
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Tim Harvey
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Igor Grinberg
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Tim Harvey
• [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot   Igor Grinberg
• [U-Boot] [PATCH 06/11] powerpc: remove RPXsuper board support   Masahiro Yamada
• [U-Boot] [PATCH 06/12] IMX: add comments and remove unused struct fields   Tim Harvey
• [U-Boot] [PATCH 06/14] Move autoboot code to autoboot.c   Simon Glass
• [U-Boot] [PATCH 06/18] ARM: zynq: Call zynq board_init() in SPL   Michal Simek
• [U-Boot] [PATCH 07/10][v2] driver: Add support of image load for MMC & SPI in SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH 07/11] MAKEALL: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Tim Harvey
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Nikita Kiryanov
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Tim Harvey
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Nikita Kiryanov
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Nikita Kiryanov
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Tim Harvey
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Stefano Babic
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Stefano Babic
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Eric Nelson
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Tim Harvey
• [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs   Igor Grinberg
• [U-Boot] [PATCH 07/11] powerpc: remove rsdproto board support   Masahiro Yamada
• [U-Boot] [PATCH 07/12] MX6: add structs for mmdc and ddr iomux registers   Tim Harvey
• [U-Boot] [PATCH 07/12] MX6: add structs for mmdc and ddr iomux registers   Eric Nelson
• [U-Boot] [PATCH 07/14] Move command line API into cli.c   Simon Glass
• [U-Boot] [PATCH 07/18] ARM: zynq: slcr: Fix incorrect commentary   Michal Simek
• [U-Boot] [PATCH 08/10][v2] Makefile: Add support of CONFIG_SPL_FSL_PBL   Prabhakar Kushwaha
• [U-Boot] [PATCH 08/11] buildman: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 08/11] MX6: add mmdc configuration for MX6Q/MX6DL   Tim Harvey
• [U-Boot] [PATCH 08/11] powerpc: remove MOUSSE board support   Masahiro Yamada
• [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL   Eric Nelson
• [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL   Tim Harvey
• [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL   Eric Nelson
• [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL   Otavio Salvador
• [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL   Tim Harvey
• [U-Boot] [PATCH 08/14] Move bootretry code into bootretry.c and clean up   Simon Glass
• [U-Boot] [PATCH 08/18] ARM: zynq: Setup correct slcr_lock value   Michal Simek
• [U-Boot] [PATCH 08/28] net: Move RARP receive logic out of net.c   Harsh Tailor
• [U-Boot] [PATCH 09/10][v2] board/b4qds:Add support of 2 stage NAND boot-loader   Prabhakar Kushwaha
• [U-Boot] [PATCH 09/11] IMX: add additional function for pinmux using an array   Tim Harvey
• [U-Boot] [PATCH 09/11] IMX: add additional function for pinmux using an array   Nikita Kiryanov
• [U-Boot] [PATCH 09/11] IMX: add additional function for pinmux using an array   Tim Harvey
• [U-Boot] [PATCH 09/11] IMX: add additional function for pinmux using an array   Nikita Kiryanov
• [U-Boot] [PATCH 09/11] IMX: add additional function for pinmux using an array   Tim Harvey
• [U-Boot] [PATCH 09/11] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
• [U-Boot] [PATCH 09/11] kconfig: delete redundant CONFIG_${ARCH} definition   Simon Glass
• [U-Boot] [PATCH 09/11] powerpc: remove EVB64260 board support   Masahiro Yamada
• [U-Boot] [PATCH 09/12] IMX: add additional function for pinmux using an array   Tim Harvey
• [U-Boot] [PATCH 09/12] IMX: add additional function for pinmux using an array   Eric Nelson
• [U-Boot] [PATCH 09/14] Rename bootretry functions and remove #ifdefs   Simon Glass
• [U-Boot] [PATCH 09/18] ARM: zynq: Fix bootmode mask   Michal Simek
• [U-Boot] [PATCH 1/1] imx-common: cpu: add fdt_file environment variable   Marek Vasut
• [U-Boot] [PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector   Frank Bormann
• [U-Boot] [PATCH 1/2 v2] mpc85xx: Add support for the supplement configuration unit register   York Sun
• [U-Boot] [PATCH 1/2 v2] powerpc/T208xQDS: add mtdparts suppport   Shengzhou Liu
• [U-Boot] [PATCH 1/2 v2] powerpc/T208xQDS: add mtdparts suppport   York Sun
• [U-Boot] [PATCH 1/2 v2] usb: r8a66597: Fix initialization hub that using R8A66597_MAX_ROOT_HUB   Yasuhisa Umano
• [U-Boot] [PATCH 1/2 v4] net/phy: enable get_phy_id redefinable   Shengzhou Liu
• [U-Boot] [PATCH 1/2] ARM: Add workaround for Cortex-A9 errata 794072   nitin.garg at freescale.com
• [U-Boot] [PATCH 1/2] ARM: Add workaround for Cortex-A9 errata 794072   Dirk Behme
• [U-Boot] [PATCH 1/2] ARM: Add workaround for Cortex-A9 errata 794072   Nitin Garg
• [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h   Rob Herring
• [U-Boot] [PATCH 1/2] arm: mxs: Adjust the load address of U-Boot and SPL for HAB   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: mxs: Adjust the load address of U-Boot and SPL for HAB   Stefano Babic
• [U-Boot] [PATCH 1/2] arm: mxs: Adjust the load address of U-Boot and SPL for HAB   Stefano Babic
• [U-Boot] [PATCH 1/2] arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD   Stefano Babic
• [U-Boot] [PATCH 1/2] arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD on M28EVK   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD on M28EVK   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD on M28EVK   Tom Rini
• [U-Boot] [PATCH 1/2] arm: mxs: Properly set GD pointer in SPL   Stefano Babic
• [U-Boot] [PATCH 1/2] board/freescale/common: ZM7300 driver   Shaveta Leekha
• [U-Boot] [PATCH 1/2] common/board_f: Add back gd init   York Sun
• [U-Boot] [PATCH 1/2] common/board_f: Add back gd init   York Sun
• [U-Boot] [PATCH 1/2] common/board_f: Add back gd init   Scott Wood
• [U-Boot] [PATCH 1/2] common/board_f: Add back gd init   York Sun
• [U-Boot] [PATCH 1/2] common/board_f: Add back gd init   Scott Wood
• [U-Boot] [PATCH 1/2] common/board_f: Add back gd init   York Sun
• [U-Boot] [PATCH 1/2] common/board_f: Add back gd init   York Sun
• [U-Boot] [PATCH 1/2] driver/ddr/fsl: Add DDR4 support to Freescale DDR driver   York Sun
• [U-Boot] [PATCH 1/2] eMMC: add support for operations in RPMB partition   Pierre Aubert
• [U-Boot] [PATCH 1/2] fs:ext4:cleanup: Remove superfluous code   Lukasz Majewski
• [U-Boot] [PATCH 1/2] fs:ext4:cleanup: Remove superfluous code   Simon Glass
• [U-Boot] [PATCH 1/2] i2c: sh_i2c: bugfix: i2c probe command does now work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH 1/2] i2c: sh_i2c: bugfix: i2c probe command does now work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH 1/2] mpc85xx: Add deep sleep support on T1040QDS   Tang Yuantian
• [U-Boot] [PATCH 1/2] mpc85xx: Add deep sleep support on T1040QDS   York Sun
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Scott Wood
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Scott Wood
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Chin Liang See
• [U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob   Chin Liang See
• [U-Boot] [PATCH 1/2] musb-new, dfu: first send request answer then call completions   Heiko Schocher
• [U-Boot] [PATCH 1/2] musb-new, dfu: first send request answer then call completions   Marek Vasut
• [U-Boot] [PATCH 1/2] net: zynq: Use predefined macros instead of hardcoded value   Michal Simek
• [U-Boot] [PATCH 1/2] pci: mx6: Implement power callback   Stefano Babic
• [U-Boot] [PATCH 1/2] powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb   Aneesh Bansal
• [U-Boot] [PATCH 1/2] powerpc/t4240: updated RCW and PBI for rev2.0   shh.xie at gmail.com
• [U-Boot] [PATCH 1/2] serial: zynq: Remove sparse warnings   Michal Simek
• [U-Boot] [PATCH 1/2] TI:armv7: Switch to CONFIG_SYS_BOARD_GENERIC   Tom Rini
• [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB   yasuhisa umano
• [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB   Marek Vasut
• [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB   Marek Vasut
• [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB   Marek Vasut
• [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB   Yasuhisa Umano
• [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB   Yasuhisa Umano
• [U-Boot] [PATCH 1/2] ZM7300 driver   Shaveta Leekha
• [U-Boot] [PATCH 1/3 v2] board/t208xqds: Add support of 2-stage NAND/SPI/SD boot   Shengzhou Liu
• [U-Boot] [PATCH 1/3 v2] board/t208xqds: Add support of 2-stage NAND/SPI/SD boot   York Sun
• [U-Boot] [PATCH 1/3] ARM: Add workaround for Cortex-A9 errata 794072   nitin.garg at freescale.com
• [U-Boot] [PATCH 1/3] ARM: Add workaround for Cortex-A9 errata 794072   Dirk Behme
• [U-Boot] [PATCH 1/3] board/t208xqds: Add support of 2-stage NAND/SPI/SD boot   Shengzhou Liu
• [U-Boot] [PATCH 1/3] board:tricorder: always work with valid eeprom data   Andreas Bießmann
• [U-Boot] [PATCH 1/3] cm-t54: add EEPROM support and MAC address handling   Dmitry Lifshitz
• [U-Boot] [PATCH 1/3] net/designware: ensure device private data is DMA aligned.   Marek Vasut
• [U-Boot] [PATCH 1/3] net/designware: ensure device private data is DMA aligned.   Ian Campbell
• [U-Boot] [PATCH 1/3] net/designware: ensure device private data is DMA aligned.   Alexey Brodkin
• [U-Boot] [PATCH 1/3] pcnet: access descriptor rings & init block uncached   Paul Burton
• [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Stephen Warren
• [U-Boot] [PATCH 1/4] [PATCH] spi: Add ST33ZP24 SPI TPM support   Jean-Luc BLANC
• [U-Boot] [PATCH 1/4] [PATCH] spi: Add ST33ZP24 SPI TPM support   Jean-Luc BLANC
• [U-Boot] [PATCH 1/4] [PATCH] spi: Add ST33ZP24 SPI TPM support   Simon Glass
• [U-Boot] [PATCH 1/4] ARM: atmel: sama5d3xek: convert to generic board   Bo Shen
• [U-Boot] [PATCH 1/4] ARM: OMAP5: add UART4 support   Dmitry Lifshitz
• [U-Boot] [PATCH 1/4] imx25: Add new hardware registers   dietho at gmx.de
• [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics   Tim Harvey
• [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics   Tim Harvey
• [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics   Stefano Babic
• [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics   Stefano Babic
• [U-Boot] [PATCH 1/4] powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()   York Sun
• [U-Boot] [PATCH 1/4] powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()   Alexander Graf
• [U-Boot] [PATCH 1/4][v7] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   York Sun
• [U-Boot] [PATCH 1/5] MIPS: stub interrupt_init function   Paul Burton
• [U-Boot] [PATCH 1/5] PPC 85xx QEMU: Always assume 1 core   Alexander Graf
• [U-Boot] [PATCH 1/5] rand: do not surround function declarations by #ifdef   Masahiro Yamada
• [U-Boot] [PATCH 1/5] siemens: cosmetic: remove unused and rename defines   Samuel Egli
• [U-Boot] [PATCH 1/5] usb: ci_udc: Support larger packets   Stephen Warren
• [U-Boot] [PATCH 1/5] usb: ci_udc: Support larger packets   Marek Vasut
• [U-Boot] [PATCH 1/5] usb: ehci: mxs: Add board-specific callbacks   Marek Vasut
• [U-Boot] [PATCH 1/6] arm: rmobile: Coordinate the common part of the header file of r8a7790 and r8a7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/6] ARM: tegra: allow pinmux mux option not to be set by init tables   Stephen Warren
• [U-Boot] [PATCH 1/6] fdt_support: split fdt_getprop_u32_default   Alexander Graf
• [U-Boot] [PATCH 1/7] omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARD   Nishanth Menon
• [U-Boot] [PATCH 1/8] arm: rmobile: lager: Update QoS initialization to version 0.955   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/8] arm: rmobile: Merge functions to get the CPU information of R8A7790 and R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/8] imx-common: add board_video_skip   Eric Bénard
• [U-Boot] [PATCH 1/8] imx-common: add board_video_skip   Eric Bénard
• [U-Boot] [PATCH 1/8] imx-common: add board_video_skip   Eric Nelson
• [U-Boot] [PATCH 1/8] imx-common: add board_video_skip   Stefano Babic
• [U-Boot] [PATCH 1/8] kmp204x: Add support for the unit LEDs   Valentin Longchamp
• [U-Boot] [PATCH 1/8] kmp204x: Add support for the unit LEDs   York Sun
• [U-Boot] [PATCH 1/8] omap: overo: allow the use of a plain text env file instead boot scripts   Ash Charles
• [U-Boot] [PATCH 1/8] ums: support block devices not MMC devices   Stephen Warren
• [U-Boot] [PATCH 1/8] wandboard: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 1/8] wandboard: Convert to generic board   Stefano Babic
• [U-Boot] [PATCH 1/8] wandboard: Convert to generic board   Stefano Babic
• [U-Boot] [PATCH 1/8] wandboard: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 1/8] wandboard: Convert to generic board   Stefano Babic
• [U-Boot] [PATCH 1/9] arm: rmobile: Add define of SCIF register for R8A7790 and R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/9] fpga: spartan2: Avoid CamelCase   Michal Simek
• [U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB   Rommel G Custodio
• [U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB   Rommel G Custodio
• [U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB   Rommel G Custodio
• [U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB   Prabhakar Kushwaha
• [U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB   Prabhakar Kushwaha
• [U-Boot] [PATCH 10/10][v2] board/t104xrdb: Add support of NAND, SD, SPI boot for T104xRDB   Prabhakar Kushwaha
• [U-Boot] [PATCH 10/10][v2] board/t104xrdb: Add support of NAND, SD, SPI boot for T104xRDB   Rommel G Custodio
• [U-Boot] [PATCH 10/11] arm: remove lubbock board support   Masahiro Yamada
• [U-Boot] [PATCH 10/11] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
• [U-Boot] [PATCH 10/11] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Simon Glass
• [U-Boot] [PATCH 10/11] ventana: auto-configure for IMX6Q vs IMX6DL   Stefano Babic
• [U-Boot] [PATCH 10/11] ventana: auto-configure for IMX6Q vs IMX6DL   Tim Harvey
• [U-Boot] [PATCH 10/11] ventana: auto-configure for IMX6Q vs IMX6DL   Tim Harvey
• [U-Boot] [PATCH 10/12] imx: ventana: split read_eeprom into standalone file   Tim Harvey
• [U-Boot] [PATCH 10/14] m68k: powerpc: Clean up do_mdm_init   Simon Glass
• [U-Boot] [PATCH 10/18] ARM: zynq: Fix building SPL without FPGA support   Michal Simek
• [U-Boot] [PATCH 11/11] arm: remove mx31ads board support   Masahiro Yamada
• [U-Boot] [PATCH 11/11] arm: remove mx31ads board support   Wolfgang Denk
• [U-Boot] [PATCH 11/11] arm: remove mx31ads board support   Masahiro Yamada
• [U-Boot] [PATCH 11/11] arm: remove mx31ads board support   Tom Rini
• [U-Boot] [PATCH 11/11] kconfig: remove old script   Masahiro Yamada
• [U-Boot] [PATCH 11/11] kconfig: remove old script   Simon Glass
• [U-Boot] [PATCH 11/11] ventana: switch to SPL   Tim Harvey
• [U-Boot] [PATCH 11/11] ventana: switch to SPL   Tim Harvey
• [U-Boot] [PATCH 11/11] ventana: switch to SPL   Stefano Babic
• [U-Boot] [PATCH 11/11] ventana: switch to SPL   Tim Harvey
• [U-Boot] [PATCH 11/11] ventana: switch to SPL   Stefano Babic
• [U-Boot] [PATCH 11/11] ventana: switch to SPL   Stefan Roese
• [U-Boot] [PATCH 11/12] imx: ventana: auto-configure for IMX6Q vs IMX6DL   Tim Harvey
• [U-Boot] [PATCH 11/14] Simplify the main loop   Simon Glass
• [U-Boot] [PATCH 11/18] ARM: zynq: Extend kernel image size to 60MB   Michal Simek
• [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
• [U-Boot] [PATCH 12/14] main: Hide the hush/simple details inside cli.c   Simon Glass
• [U-Boot] [PATCH 12/18] ARM: zynq: Add MIO detection code   Michal Simek
• [U-Boot] [PATCH 13/14] main: Make the execution path a little clearer in main.c   Simon Glass
• [U-Boot] [PATCH 13/18] ARM: zynq: ehci: Added USB host driver support   Michal Simek
• [U-Boot] [PATCH 14/14] main: Avoid unncessary strdup()/free()   Simon Glass
• [U-Boot] [PATCH 14/18] ARM: zynq: Added USB host support for zynq boards   Michal Simek
• [U-Boot] [PATCH 15/18] ARM: zynq: Enable the FAT write capability   Michal Simek
• [U-Boot] [PATCH 16/18] ARM: zynq: Move USB/SD/MMC common FAT configs   Michal Simek
• [U-Boot] [PATCH 17/18] ARM: zynq: Enable EXT4 configs   Michal Simek
• [U-Boot] [PATCH 18/18] ARM: zynq: Extend maximum number of command arguments   Michal Simek
• [U-Boot] [PATCH 2/2 v2] powerpc/T208xRDB: add mtdparts suppport   Shengzhou Liu
• [U-Boot] [PATCH 2/2 v2] powerpc/T208xRDB: add mtdparts suppport   York Sun
• [U-Boot] [PATCH 2/2 v2] usb: r8a66597: Fix initilization size of r8a66597 info structure   Marek Vasut
• [U-Boot] [PATCH 2/2 v2] usb: r8a66597: Fix initilization size of r8a66597 info structure   Yasuhisa Umano
• [U-Boot] [PATCH 2/2] ARM: Add workaround for Cortex-A9 errata 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH 2/2] ARM: Add workaround for Cortex-A9 errata 761320   Dirk Behme
• [U-Boot] [PATCH 2/2] ARM: Add workaround for Cortex-A9 errata 761320   Nitin Garg
• [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt   Rob Herring
• [U-Boot] [PATCH 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD   Tetsuyuki Kobayashi
• [U-Boot] [PATCH 2/2] arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: mxs: Add serial console support into SPL   Stefano Babic
• [U-Boot] [PATCH 2/2] arm: mxs: Add serial console support into SPL   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: mxs: Add serial console support into SPL   Stefano Babic
• [U-Boot] [PATCH 2/2] arm: mxs: Add serial console support into SPL   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: mxs: Add support for generating signed BootStream   Stefano Babic
• [U-Boot] [PATCH 2/2] arm: mxs: Add support for generating signed BootStream   Stefano Babic
• [U-Boot] [PATCH 2/2] arm: mxs: Add support for generating signed BootStream   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: mxs: Add support for generating signed BootStream   Marek Vasut
• [U-Boot] [PATCH 2/2] b4qds: VID support   Shaveta Leekha
• [U-Boot] [PATCH 2/2] board/b4qds: VID support   Shaveta Leekha
• [U-Boot] [PATCH 2/2] common/board_f: Fix size variable   York Sun
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Heiko Schocher
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Marek Vasut
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Pantelis Antoniou
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Lukasz Majewski
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Heiko Schocher
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Marek Vasut
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Lukasz Majewski
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Heiko Schocher
• [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function   Lukasz Majewski
• [U-Boot] [PATCH 2/2] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Pierre Aubert
• [U-Boot] [PATCH 2/2] fs:ext4:write:fix: Reinitialize global variables after updating a file   Lukasz Majewski
• [U-Boot] [PATCH 2/2] fs:ext4:write:fix: Reinitialize global variables after updating a file   Simon Glass
• [U-Boot] [PATCH 2/2] mpc85xx/T1040QDS_D4: Add DDR4 support   York Sun
• [U-Boot] [PATCH 2/2] mtd: denali: recover the same function prototypes as Linux Kernel   Masahiro Yamada
• [U-Boot] [PATCH 2/2] mtd: denali: recover the same function prototypes as Linux Kernel   Chin Liang See
• [U-Boot] [PATCH 2/2] net: zynq: Fix sparse warnings in gem   Michal Simek
• [U-Boot] [PATCH 2/2] patman: Avoid duplicate sign-offs   Simon Glass
• [U-Boot] [PATCH 2/2] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB   Aneesh Bansal
• [U-Boot] [PATCH 2/2] powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot size   York Sun
• [U-Boot] [PATCH 2/2] powerpc/T4QDS: add two stage boot of nand/sd   shh.xie at gmail.com
• [U-Boot] [PATCH 2/2] serial: zynq: Fix typo in suffix function name   Michal Simek
• [U-Boot] [PATCH 2/2] TI:omap3: Convert omap3_beagle to ti_omap3_common.h   Tom Rini
• [U-Boot] [PATCH 2/2] usb: r8a66597: Fix initilization size of r8a66597 info, structure   Marek Vasut
• [U-Boot] [PATCH 2/2] usb: r8a66597: Fix initilization size of r8a66597 info, structure   Marek Vasut
• [U-Boot] [PATCH 2/2] usb: r8a66597: Fix initilization size of r8a66597 info, structure   yasuhisa umano
• [U-Boot] [PATCH 2/2] usb: r8a66597: Fix initilization size of r8a66597 info, structure   Yasuhisa Umano
• [U-Boot] [PATCH 2/3 v2] board/t208xrdb: Add support of 2-stage NAND/SPI/SD boot   Shengzhou Liu
• [U-Boot] [PATCH 2/3 v2] board/t208xrdb: Add support of 2-stage NAND/SPI/SD boot   York Sun
• [U-Boot] [PATCH 2/3] ARM: Add workaround for Cortex-A9 errata 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH 2/3] board/t208xrdb: Add support of 2-stage NAND/SPI/SD boot   Shengzhou Liu
• [U-Boot] [PATCH 2/3] board:tricorder: enable omap_gpio clocks   Andreas Bießmann
• [U-Boot] [PATCH 2/3] dfu: add static alt num count in dfu_config_entities()   Przemyslaw Marczak
• [U-Boot] [PATCH 2/3] dfu: add static alt num count in dfu_config_entities()   Marek Vasut
• [U-Boot] [PATCH 2/3] dfu: add static alt num count in dfu_config_entities()   Lukasz Majewski
• [U-Boot] [PATCH 2/3] env_mmc: support env partition setup in runtime   Dmitry Lifshitz
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Stefan Monnier
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Ian Campbell
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Alexey Brodkin
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Ian Campbell
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Alexey Brodkin
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Ian Campbell
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Alexey Brodkin
• [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send   Ian Campbell
• [U-Boot] [PATCH 2/3] pcnet: align rx buffers for cache invalidation   Paul Burton
• [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399   York Sun
• [U-Boot] [PATCH 2/3] usb: tegra: refactor PHY type selection   Stephen Warren
• [U-Boot] [PATCH 2/4] ARM: atmel: sama5d3_xplained: convert to generic board   Bo Shen
• [U-Boot] [PATCH 2/4] ARM: OMAP5: Power: add LDO2 support for Palmas driver   Dmitry Lifshitz
• [U-Boot] [PATCH 2/4] powerpc/freescale: Change the return value of mac_read_from_eeprom()   York Sun
• [U-Boot] [PATCH 2/4] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T4240QDS and T4160QDS   York Sun
• [U-Boot] [PATCH 2/4] spi: ST33ZP24 SPI: Patch driver to support 2 TPMs   Simon Glass
• [U-Boot] [PATCH 2/4] spi: ST33ZP24 SPI: Patch driver to support 2 TPMs   Jean-Luc BLANC
• [U-Boot] [PATCH 2/4] spi: ST33ZP24 SPI: Patch driver to support 2 TPMs   Jean-Luc BLANC
• [U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init   Tim Harvey
• [U-Boot] [PATCH 2/4] video: Add support for imx25 lcd controller   dietho at gmx.de
• [U-Boot] [PATCH 2/5] arm: mxs: Wait when disabling VDDMEM current limiter   Marek Vasut
• [U-Boot] [PATCH 2/5] MIPS: move mips_io_port_base out of board.c   Paul Burton
• [U-Boot] [PATCH 2/5] net: rename and refactor eth_rand_ethaddr() function   Joe Hershberger
• [U-Boot] [PATCH 2/5] net: rename and refactor eth_rand_ethaddr() function   Wolfgang Denk
• [U-Boot] [PATCH 2/5] net: rename and refactor eth_rand_ethaddr() function   Masahiro Yamada
• [U-Boot] [PATCH 2/5] PPC 85xx QEMU: Don't use HID1   Alexander Graf
• [U-Boot] [PATCH 2/5] siemens: update DDR3 parameters for dxr2   Samuel Egli
• [U-Boot] [PATCH 2/5] usb: ci_udc: set ep->req.actual after transfer   Stephen Warren
• [U-Boot] [PATCH 2/6] arm: rmobile: r8a779x: Fix L2 cache init and latency setting   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/6] ARM: tegra: add GPIO initialization table function   Stephen Warren
• [U-Boot] [PATCH 2/6] fdt_support: Add helper function to read "ranges" property   Alexander Graf
• [U-Boot] [PATCH 2/7] OMAP3: zoom1: Configure GPMC for Ethernet   Nishanth Menon
• [U-Boot] [PATCH 2/8] arm: rmobile: Add 1 to value of the CPU revision in rmobile_get_cpu_rev_integer()   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/8] arm: rmobile: koelsch: Update QoS initialization   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/8] kmp204x: handle dip-switch for factory settings   York Sun
• [U-Boot] [PATCH 2/8] kmp204x: handle dip-switch for factory settings   Valentin Longchamp
• [U-Boot] [PATCH 2/8] mx53loco: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 2/8] nitrogen6x: use common board_video_skip   Eric Bénard
• [U-Boot] [PATCH 2/8] nitrogen6x: use common board_video_skip   Eric Nelson
• [U-Boot] [PATCH 2/8] OMAP3: overo: add command support for mtd and ubi   Ash Charles
• [U-Boot] [PATCH 2/8] ums: remove UMS_{NUM, START}_SECTORS + UMS_START_SECTOR   Stephen Warren
• [U-Boot] [PATCH 2/9] arm: rmobile: koelsch: Remove define of SCIF register   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/9] fpga: spartan3: Avoid CamelCase   Michal Simek
• [U-Boot] [PATCH 3/3 v2] board/t2080rdb: some update for t2080rdb   Shengzhou Liu
• [U-Boot] [PATCH 3/3 v2] board/t2080rdb: some update for t2080rdb   York Sun
• [U-Boot] [PATCH 3/3] board/t2080rdb: some update for t2080rdb   Shengzhou Liu
• [U-Boot] [PATCH 3/3] board:tricorder: fixup SPL OOB layout   Andreas Bießmann
• [U-Boot] [PATCH 3/3] cm-t54: add environment partition runtime detection   Dmitry Lifshitz
• [U-Boot] [PATCH 3/3] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting   Lukasz Majewski
• [U-Boot] [PATCH 3/3] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting   Lukasz Majewski
• [U-Boot] [PATCH 3/3] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting   Stefan Schmidt
• [U-Boot] [PATCH 3/3] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting   Lukasz Majewski
• [U-Boot] [PATCH 3/3] MX6: Enable ARM errata workaround 794072 and 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH 3/3] MX6: Enable ARM errata workaround 794072 and 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH 3/3] net/designware: align cache invalidation on rx   Ian Campbell
• [U-Boot] [PATCH 3/3] pcnet: force ordering of descriptor accesses   Paul Burton
• [U-Boot] [PATCH 3/3] usb: tegra: support device mode   Stephen Warren
• [U-Boot] [PATCH 3/4] ARM: atmel: at91sam9m10g45ek: convert to generic board   Bo Shen
• [U-Boot] [PATCH 3/4] ARM: OMAP5: add CKO buffer control mask   Dmitry Lifshitz
• [U-Boot] [PATCH 3/4] power: Add support for LTC3676 PMIC   Tim Harvey
• [U-Boot] [PATCH 3/4] power: Add support for LTC3676 PMIC   Stefano Babic
• [U-Boot] [PATCH 3/4] powerpc/mpc85xx: Fix argument for calling board_init_f   York Sun
• [U-Boot] [PATCH 3/4] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080QDS   York Sun
• [U-Boot] [PATCH 3/4] spi: ST33ZP24 SPI: Patch driver to support hash in locality 4   Jean-Luc BLANC
• [U-Boot] [PATCH 3/4] spi: ST33ZP24 SPI: Patch driver to support hash in locality 4   Simon Glass
• [U-Boot] [PATCH 3/4] zmx25: Add extended support for the cpu and base boards   dietho at gmx.de
• [U-Boot] [PATCH 3/5] arm: mxs: Wait for DRAM to start   Marek Vasut
• [U-Boot] [PATCH 3/5] blackfin: replace bfin_gen_rand_mac() with eth_random_addr()   Masahiro Yamada
• [U-Boot] [PATCH 3/5] blackfin: replace bfin_gen_rand_mac() with eth_random_addr()   Mike Frysinger
• [U-Boot] [PATCH 3/5] blackfin: replace bfin_gen_rand_mac() with eth_random_addr()   Masahiro Yamada
• [U-Boot] [PATCH 3/5] MIPS: define __init_end in u-boot.lds   Paul Burton
• [U-Boot] [PATCH 3/5] powerpc/mpc85xx: Update TLB CAMs in relocated mode   Alexander Graf
• [U-Boot] [PATCH 3/5] siemens: add led cmd for flexible LED control   Samuel Egli
• [U-Boot] [PATCH 3/5] usb: ci_udc: make PHY initialization conditional   Stephen Warren
• [U-Boot] [PATCH 3/6] arm: rmobile: koelsch: Change name of structure   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/6] ARM: tegra: add function to enable input clamping on tristate   Stephen Warren
• [U-Boot] [PATCH 3/6] PPC: 85xx: Remove IVOR reset   Alexander Graf
• [U-Boot] [PATCH 3/6] PPC: 85xx: Remove IVOR reset   York Sun
• [U-Boot] [PATCH 3/6] PPC: 85xx: Remove IVOR reset   Alexander Graf
• [U-Boot] [PATCH 3/7] OMAP3: zoom1: enable LAN9211   Nishanth Menon
• [U-Boot] [PATCH 3/8] arm: rmobile: Add rmobile_get_cpu_rev_fraction() for R-Car SoCs   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/8] arm: rmobile: koelsch: Update calculation of CONFIG_SH_TMU_CLK_FREQ   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/8] kmp204x: selftest/factory test pin support   Valentin Longchamp
• [U-Boot] [PATCH 3/8] mx6sabre_common: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 3/8] mx6sabresd: use common board_video_skip   Eric Bénard
• [U-Boot] [PATCH 3/8] OMAP3: overo: increase linux partition to 8 MiB   Ash Charles
• [U-Boot] [PATCH 3/8] ums: remove error-checking of MMC device size   Stephen Warren
• [U-Boot] [PATCH 3/9] arm: rmobile: koelsch: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/9] fpga: virtex2: Avoid CamelCase   Michal Simek
• [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC   Stefano Babic
• [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC   Tim Harvey
• [U-Boot] [PATCH 4/4] ARM: atmel: at91sam9x5ek: convert to generic board   Bo Shen
• [U-Boot] [PATCH 4/4] cm-t54: add cm-t54 board support   Dmitry Lifshitz
• [U-Boot] [PATCH 4/4] i2c: Add ST33ZP24 I2C TPM support   Jean-Luc BLANC
• [U-Boot] [PATCH 4/4] i2c: Add ST33ZP24 I2C TPM support   Simon Glass
• [U-Boot] [PATCH 4/4] powerpc/freescale: Convert selected boards to generic board architecture   York Sun
• [U-Boot] [PATCH 4/4] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T1040QDS and T1040RDB   York Sun
• [U-Boot] [PATCH 4/4] Update of the company logo   dietho at gmx.de
• [U-Boot] [PATCH 4/5] arm: mxs: olinuxino: Enable USB only when needed   Marek Vasut
• [U-Boot] [PATCH 4/5] fs: ubifs: drop __DATE__ and __TIME__   Masahiro Yamada
• [U-Boot] [PATCH 4/5] MIPS: allow use of generic board   Paul Burton
• [U-Boot] [PATCH 4/5] powerpc/mpc85xx: Pass 0 flags to board_init_f   York Sun
• [U-Boot] [PATCH 4/5] powerpc/mpc85xx: Pass 0 flags to board_init_f   Alexander Graf
• [U-Boot] [PATCH 4/5] powerpc/mpc85xx: Pass 0 flags to board_init_f   York Sun
• [U-Boot] [PATCH 4/5] powerpc/mpc85xx: Pass 0 flags to board_init_f   Alexander Graf
• [U-Boot] [PATCH 4/5] siemens: change LED indication in DFU mode   Samuel Egli
• [U-Boot] [PATCH 4/5] usb: ci_udc: support variants with hostpc register   Stephen Warren
• [U-Boot] [PATCH 4/6] arm: rmobile: koelsch: Remove NOR-Flash support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/6] ARM: tegra: make use of GPIO init table on Jetson TK1   Stephen Warren
• [U-Boot] [PATCH 4/6] PPC: 85xx: Generalize DDR TLB mapping function   Alexander Graf
• [U-Boot] [PATCH 4/7] omap3: zoom1: enable common network commands   Nishanth Menon
• [U-Boot] [PATCH 4/8] arm: rmobile: Add prototype for function to get the CPU information to rmobile.h   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/8] arm: rmobile: Add register infomation of PLL regsiter   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/8] kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines   Valentin Longchamp
• [U-Boot] [PATCH 4/8] mx53ard: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 4/8] OMAP3: overo: eliminate hard-coded partition offsets   Ash Charles
• [U-Boot] [PATCH 4/8] RiOTboard and MarSBoard: add new boards support   Stefano Babic
• [U-Boot] [PATCH 4/8] RiOTboard and MarSBoard: add new boards support   Eric Bénard
• [U-Boot] [PATCH 4/8] RiOTboard and MarSBoard: add new boards support   selsinork at gmail.com
• [U-Boot] [PATCH 4/8] RiOTboard and MarSBoard: add new boards support   Eric Bénard
• [U-Boot] [PATCH 4/8] ums: remove ums_disk_init()   Stephen Warren
• [U-Boot] [PATCH 4/9] arm: rmobile: koelsch: Enable optimization of thumb   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/9] fpga: xilinx: Avoid CamelCase for in Xilinx_desc   Michal Simek
• [U-Boot] [PATCH 5/10] common/env: Point default environment for GD   Scott Wood
• [U-Boot] [PATCH 5/10] common/env: Point default environment for GD   Prabhakar Kushwaha
• [U-Boot] [PATCH 5/10] common/env: Point default environment for GD   Scott Wood
• [U-Boot] [PATCH 5/10] common/env: Point default environment for GD   Prabhakar Kushwaha
• [U-Boot] [PATCH 5/10] common/env: Point default environment for GD   Scott Wood
• [U-Boot] [PATCH 5/5] arm: mxs: olinuxino: Fine-tune DRAM configuration   Marek Vasut
• [U-Boot] [PATCH 5/5] beagle: fastboot support   Rob Herring
• [U-Boot] [PATCH 5/5] beagle: fastboot support   Rob Herring
• [U-Boot] [PATCH 5/5] kbuild: build with -Werror=date-time if the compiler supports it   Masahiro Yamada
• [U-Boot] [PATCH 5/5] MIPS: Malta: convert to generic board   Paul Burton
• [U-Boot] [PATCH 5/5] MIPS: Malta: convert to generic board   Daniel Schwierzeck
• [U-Boot] [PATCH 5/5] MIPS: Malta: convert to generic board   Paul Burton
• [U-Boot] [PATCH 5/5] PPC 85xx QEMU: Make a generic board file   Alexander Graf
• [U-Boot] [PATCH 5/5] siemens: cosmetic: rename project_dir   Samuel Egli
• [U-Boot] [PATCH 5/5] usb: ums: use only 1 buffer for CI_UDC   Stephen Warren
• [U-Boot] [PATCH 5/6] arm: rmobile: lager: Change name of the structure   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/6] ARM: tegra: clamp inputs on Jetson TK1   Stephen Warren
• [U-Boot] [PATCH 5/6] PPC 85xx: Add ELF entry point   Alexander Graf
• [U-Boot] [PATCH 5/7] omap3: zoom1: disable JFFS2 and enable FS_GENERIC   Nishanth Menon
• [U-Boot] [PATCH 5/7] omap3: zoom1: disable JFFS2 and enable FS_GENERIC   Tom Rini
• [U-Boot] [PATCH 5/8] arm: omap3: Fix omap3_overo SPL boot hangup   Ash Charles
• [U-Boot] [PATCH 5/8] arm: rmobile: koelsch: Change to maximum CPU frequency   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/8] arm: rmobile: Update print_cpuinfo function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/8] imx-common/video: add detect_hdmi   Eric Bénard
• [U-Boot] [PATCH 5/8] kmp204x: complete the reset sequence and PRST configuration   Valentin Longchamp
• [U-Boot] [PATCH 5/8] mx53smd: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 5/8] ums: move IO support code to common location   Stephen Warren
• [U-Boot] [PATCH 5/9] arm: rmobile: lager: Remove define of SCIF register   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/9] fpga: xilinx: Fix the rest of CamelCases   Michal Simek
• [U-Boot] [PATCH 6/10] driver/ifc: define nand_spl_load_image() for SPL   Scott Wood
• [U-Boot] [PATCH 6/10] driver/ifc: define nand_spl_load_image() for SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH 6/10] driver/ifc: define nand_spl_load_image() for SPL   Scott Wood
• [U-Boot] [PATCH 6/6] arm: rmobile: lager: Remove NOR-Flash support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/6] ARM: tegra: update Venice2 pinmux   Stephen Warren
• [U-Boot] [PATCH 6/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz   Nishanth Menon
• [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz   Tom Rini
• [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz   Nishanth Menon
• [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz   Tom Rini
• [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz   Nishanth Menon
• [U-Boot] [PATCH 6/8] [omap3][overo] Add Board Revision for Wireless chip   Ash Charles
• [U-Boot] [PATCH 6/8] arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/8] arm: rmobile: r8a7790: Add support ES2 revision   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/8] kmp204x: update the RCW   Valentin Longchamp
• [U-Boot] [PATCH 6/8] mx53evk: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 6/8] nitrogen6x: use common detect_hdmi   Eric Bénard
• [U-Boot] [PATCH 6/8] nitrogen6x: use common detect_hdmi   Eric Nelson
• [U-Boot] [PATCH 6/8] ums: use get_device() not find_mmc_device();   Stephen Warren
• [U-Boot] [PATCH 6/9] arm: rmobile: lager: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/9] fdt_support: add 'const' qualifier for unchanged argument.   Masahiro Yamada
• [U-Boot] [PATCH 6/9] fpga: xilinx: Simplify load/dump/info function handling   Michal Simek
• [U-Boot] [PATCH 7/10] driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL   Scott Wood
• [U-Boot] [PATCH 7/10] driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH 7/10] driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL   Scott Wood
• [U-Boot] [PATCH 7/10] driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH 7/7] omap3: zoom1: fix default console   Nishanth Menon
• [U-Boot] [PATCH 7/8] arm: rmobile: lager: Change to maximum CPU frequency   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/8] arm: rmobile: r8a7791: Add support ES2 revision   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/8] kmp204x: add workaround for A-004849   Valentin Longchamp
• [U-Boot] [PATCH 7/8] mx6sabresd: use common detect_hdmi   Eric Bénard
• [U-Boot] [PATCH 7/8] OMAP3: overo: add some Gumstix expansion boards   Ash Charles
• [U-Boot] [PATCH 7/8] udoo: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Stephen Warren
• [U-Boot] [PATCH 7/9] arm: rmobile: lager: Enable optimization of thumb   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/9] fpga: zynq: Remove sparse warnings   Michal Simek
• [U-Boot] [PATCH 8/10] Makefile: Add support of RAMBOOT_SPLPBL   Scott Wood
• [U-Boot] [PATCH 8/10] Makefile: Add support of RAMBOOT_SPLPBL   Prabhakar Kushwaha
• [U-Boot] [PATCH 8/10] Makefile: Add support of RAMBOOT_SPLPBL   Scott Wood
• [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree   Ash Charles
• [U-Boot] [PATCH 8/8] arm: rmobile: keolsch: Add support ES2 revision of R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 8/8] arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 8/8] embest/mx6boards: use common detect_hdmi   Eric Bénard
• [U-Boot] [PATCH 8/8] hummingboard: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 8/8] kmp204x: enable the errata command   Valentin Longchamp
• [U-Boot] [PATCH 8/8] ums: allow the user to specify the device type   Stephen Warren
• [U-Boot] [PATCH 8/9] fpga: zynq: Use helper functions for zynq dma   Michal Simek
• [U-Boot] [PATCH 8/9] gpio: r8a7791-gpio: Fix typo in macro   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 9/10] board/b4qds:Add support of 2 stage NAND boot-loader   Scott Wood
• [U-Boot] [PATCH 9/10] board/b4qds:Add support of 2 stage NAND boot-loader   Prabhakar Kushwaha
• [U-Boot] [PATCH 9/10] board/b4qds:Add support of 2 stage NAND boot-loader   Scott Wood
• [U-Boot] [PATCH 9/9] fpga: zynq: Use helper function zynq_validate_bitstream   Michal Simek
• [U-Boot] [PATCH 9/9] gpio: r8a7790-gpio: Fix typo in macro   Nobuhiro Iwamatsu
• [U-Boot] [PATCH ][v3] powerpc/T4QDS: add two stage boot of nand/sd   shh.xie at gmail.com
• [U-Boot] [PATCH RESEND-WITH-JUSTIFICATION] spi: soft_spi: Support NULL din/dout buffers   Andrew Ruder
• [U-Boot] [PATCH RESEND-WITH-JUSTIFICATION] spi: soft_spi: Support NULL din/dout buffers   Andrew Ruder
• [U-Boot] [PATCH RESEND-WITH-JUSTIFICATION] spi: soft_spi: Support NULL din/dout buffers   Jagan Teki
• [U-Boot] [PATCH RESEND-WITH-JUSTIFICATION] spi: soft_spi: Support NULL din/dout buffers   Andrew Ruder
• [U-Boot] [PATCH RESEND-WITH-JUSTIFICATION] spi: soft_spi: Support NULL din/dout buffers   Jagan Teki
• [U-Boot] [PATCH RESEND-WITH-JUSTIFICATION] spi: soft_spi: Support NULL din/dout buffers   Andrew Ruder
• [U-Boot] [PATCH RESEND-WITH-JUSTIFICATION] spi: soft_spi: Support NULL din/dout buffers   Jagan Teki
• [U-Boot] [PATCH v1 0/11] Fixes on gdsys boards and some new functionality   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 0/6] mtd: nand: omap: clean up of omap_elm and omap_gpmc driver   Pekon Gupta
• [U-Boot] [PATCH v1 01/11] board: controlcenterd: Fix pci access   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 02/11] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 03/11] board: controlcenterd: Use new API for setting i2c bus   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 03/11] board: controlcenterd: Use new API for setting i2c bus   Heiko Schocher
• [U-Boot] [PATCH v1 04/11] board: iocon: Support DisplayPort hardware   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 05/11] board: gdsys: IHS I2C master driver   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 05/11] board: gdsys: IHS I2C master driver   Heiko Schocher
• [U-Boot] [PATCH v1 06/11] board: gdsys: Increase iocon and dlv10g version string   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 07/11] board: gdsys: Configure bridge on DP501 to support DDC only   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 08/11] board: gdsys: Make gdsys osd hardware detection more robust   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 09/11] board: gdsys: Enable scrambling on DP501   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 1/6] mtd: nand: omap_elm: remove #include omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v1 1/6] mtd: nand: omap_elm: remove #include omap_gpmc.h   Stefan Roese
• [U-Boot] [PATCH v1 10/11] board: iocon: Modify iocon hardware startup   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 11/11] board: gdsys: Remove commands to reduce footprint   Heiko Schocher
• [U-Boot] [PATCH v1 11/11] board: gdsys: Remove commands to reduce footprint   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 2/6] mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate between BCH4/BCH8/BCH16   Pekon Gupta
• [U-Boot] [PATCH v1 2/6] mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate between BCH4/BCH8/BCH16   Stefan Roese
• [U-Boot] [PATCH v1 2/6] mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate between BCH4/BCH8/BCH16   Gupta, Pekon
• [U-Boot] [PATCH v1 3/6] mtd: nand: omap_elm: use macros for register definitions   Pekon Gupta
• [U-Boot] [PATCH v1 3/6] mtd: nand: omap_elm: use macros for register definitions   Stefan Roese
• [U-Boot] [PATCH v1 4/6] mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'   Pekon Gupta
• [U-Boot] [PATCH v1 4/6] mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'   Stefan Roese
• [U-Boot] [PATCH v1 5/6] mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_info   Pekon Gupta
• [U-Boot] [PATCH v1 5/6] mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_info   Stefan Roese
• [U-Boot] [PATCH v1 6/6] mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch   Pekon Gupta
• [U-Boot] [PATCH v1 6/6] mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch   Stefan Roese
• [U-Boot] [PATCH v10 0/2] S5P: Exynos: Add GPIO numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v10 0/2] S5P: Exynos: Add GPIO numbering feature   Przemyslaw Marczak
• [U-Boot] [PATCH v10 1/2] EXYNOS: Add GPIO pin numbering and rename definitions   Akshay Saraswat
• [U-Boot] [PATCH v10 1/2] EXYNOS: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v10 1/2] EXYNOS: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v10 2/2] S5P: Exynos: Config: Enable GPIO CMD config   Akshay Saraswat
• [U-Boot] [PATCH v12 0/8] arm: add Faraday SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v12 1/8] libc: move strlcpy() from ether.c to string.c   Kuo-Jung Su
• [U-Boot] [PATCH v12 1/8] libc: move strlcpy() from ether.c to string.c   Marek Vasut
• [U-Boot] [PATCH v12 1/8] libc: move strlcpy() from ether.c to string.c   Kuo-Jung Su
• [U-Boot] [PATCH v12 1/8] libc: move strlcpy() from ether.c to string.c   Marek Vasut
• [U-Boot] [PATCH v12 1/8] libc: move strlcpy() from ether.c to string.c   Kuo-Jung Su
• [U-Boot] [PATCH v12 2/8] arm: add legacy linux clock framework support   Kuo-Jung Su
• [U-Boot] [PATCH v12 3/8] arm: add Faraday ARMv5TE platform common libraries   Kuo-Jung Su
• [U-Boot] [PATCH v12 4/8] arm: faraday: add FTTMR010 timer suppor   Kuo-Jung Su
• [U-Boot] [PATCH v12 5/8] arm: faraday: add FTPWMTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v12 6/8] arm: faraday: add A369 evaluation board support   Kuo-Jung Su
• [U-Boot] [PATCH v12 7/8] arm: faraday: add missing header file for FTSDC021   Kuo-Jung Su
• [U-Boot] [PATCH v12 8/8] arm: faraday: add faraday virtual machine support   Kuo-Jung Su
• [U-Boot] [PATCH v2 0/11] Minor improvements to secure boot and enable on beaglebone   Simon Glass
• [U-Boot] [PATCH v2 0/11] Minor improvements to secure boot and enable on beaglebone   Belisko Marek
• [U-Boot] [PATCH v2 0/12] Enable LCD display on snow   Simon Glass
• [U-Boot] [PATCH V2 0/2] eMMC: support for Read Protected Memory Block (RPMB)   Pierre Aubert
• [U-Boot] [PATCH v2 0/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v2 0/5] Prohibit __DATE__ and __TIME__ (+ refactor random MAC addr)   Masahiro Yamada
• [U-Boot] [PATCH v2 0/6] ARM: tegra: add nvec keyboard support for paz00   Andrey Danin
• [U-Boot] [PATCH v2 0/7] MIPS: Malta generic board conversion   Paul Burton
• [U-Boot] [PATCH v2 0/7] MIPS: Malta generic board conversion   Daniel Schwierzeck
• [U-Boot] [PATCH v2 0/7] mtd: nand: omap: clean up of omap_elm and omap_gpmc driver   Pekon Gupta
• [U-Boot] [PATCH V2 0/8] omap3: zoom1: long pending cleanups :(   Nishanth Menon
• [U-Boot] [PATCH V2 0/8] omap3: zoom1: long pending cleanups :(   Tom Rini
• [U-Boot] [PATCH v2 0/9] Refactoring and Endian bug fixes of fdt_support   Masahiro Yamada
• [U-Boot] [PATCH v2 0/9] Refactoring and Endian bug fixes of fdt_support   Masahiro Yamada
• [U-Boot] [PATCH v2 01/11] Check that u-boot.bin size looks correct   Simon Glass
• [U-Boot] [PATCH v2 01/12] exynos: Drop old smdk5250.c file   Simon Glass
• [U-Boot] [PATCH v2 02/11] ti: am335x: Fix the U-Boot binary output   Simon Glass
• [U-Boot] [PATCH v2 02/12] power: Rename CONFIG_PMIC_... to CONFIG_POWER_...   Simon Glass
• [U-Boot] [PATCH v2 03/11] am33xx/omap: Allow cache enable for all Sitara/OMAP   Simon Glass
• [U-Boot] [PATCH v2 03/12] power: Add PMIC_ prefix to CHARGER_EN/DISABLE   Simon Glass
• [U-Boot] [PATCH v2 04/11] hash: Export functions to find and show hash   Simon Glass
• [U-Boot] [PATCH v2 04/12] power: Add support for TPS65090 PMU chip.   Simon Glass
• [U-Boot] [PATCH v2 05/11] fdt: Add DEV_TREE_BIN option to specify a device tree binary file   Simon Glass
• [U-Boot] [PATCH v2 05/12] exynos5: Enable tps65090 on exynos5-dt   Simon Glass
• [U-Boot] [PATCH v2 06/11] fdt: Update functions which write to an FDT to return -ENOSPC   Simon Glass
• [U-Boot] [PATCH v2 06/12] power: Explicitly select pmic device's bus   Simon Glass
• [U-Boot] [PATCH v2 07/11] mkimage: Automatically make space in FDT when full   Simon Glass
• [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Simon Glass
• [U-Boot] [PATCH v2 08/11] arm: ti: Increase malloc size to 16MB for armv7 boards   Simon Glass
• [U-Boot] [PATCH v2 08/12] exynos: Enable PSHOLD in SPL   Simon Glass
• [U-Boot] [PATCH v2 09/11] am33xx/omap: Enable CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH v2 09/12] exynos: dts: Disable cros_ec interrupts due to broken GPIOs   Simon Glass
• [U-Boot] [PATCH V2 1/2] bootstage: arm: fix fdt stashing code   Albert ARIBAUD
• [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
• [U-Boot] [PATCH V2 1/2] eMMC: add support for operations in RPMB partition   Pierre Aubert
• [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v2 1/2] imx: add rules for U-Boot DTB support   Stefano Babic
• [U-Boot] [PATCH v2 1/2] lsxl: use 64bit for LBA48 to support 4 TB drives   Michael Walle
• [U-Boot] [PATCH v2 1/2] net/designware: ensure device private data is DMA aligned.   Ian Campbell
• [U-Boot] [PATCH v2 1/2] patman: Deal with 'git apply' failures correctly   Simon Glass
• [U-Boot] [PATCH v2 1/2] usb:gadget:f_thor: code cleanup in function download_tail()   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb:gadget:f_thor: code cleanup in function download_tail()   Przemyslaw Marczak
• [U-Boot] [Patch v2 1/3] armv8/cache: Consolidate setting for MAIR and TCR   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/4] arm: mx5: Fix memory slowness on MX53QSB   Stefano Babic
• [U-Boot] [PATCH v2 1/4] samsung: misc: allows using environmental macros as args in menu commands   Przemyslaw Marczak
• [U-Boot] [Patch v2 1/5] powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()   York Sun
• [U-Boot] [PATCH v2 1/5] rand: do not surround function declarations by #ifdef   Masahiro Yamada
• [U-Boot] [PATCH v2 1/5] TI:omap5: Move CONFIG_ENV_SIZE to board config files   Tom Rini
• [U-Boot] [PATCH v2 1/6] i2c: add slave mode support   Andrey Danin
• [U-Boot] [PATCH v2 1/6] i2c: add slave mode support   Heiko Schocher
• [U-Boot] [PATCH v2 1/7] MIPS: stub interrupt_init function   Paul Burton
• [U-Boot] [PATCH v2 1/7] mtd: nand: omap_elm: remove #include omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v2 1/8] imx-common: add board_video_skip   Eric Bénard
• [U-Boot] [PATCH v2 1/8] imx-common: add board_video_skip   Stefano Babic
• [U-Boot] [PATCH V2 1/8] omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARD   Nishanth Menon
• [U-Boot] [PATCH v2 1/9] fdt_support: delete unnecessary DECLARE_GLOBAL_DATA_PTR   Masahiro Yamada
• [U-Boot] [PATCH v2 1/9] sunxi: initial sun7i clocks and timer support.   Marek Vasut
• [U-Boot] [PATCH v2 1/9] sunxi: initial sun7i clocks and timer support.   Ian Campbell
• [U-Boot] [PATCH v2 10/11] am33xx/omap: Enable FIT support   Simon Glass
• [U-Boot] [PATCH v2 10/12] exynos: dts: Enable LCD for snow   Simon Glass
• [U-Boot] [PATCH v2 11/11] am33xx/omap: Enable secure boot with CONFIG_FIT_SIGNATURE   Simon Glass
• [U-Boot] [PATCH v2 11/12] exynos: Enable the LCD backlight for snow   Simon Glass
• [U-Boot] [PATCH v2 12/12] initcall: Improve debugging support   Simon Glass
• [U-Boot] [PATCH v2 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v2 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD   Heiko Schocher
• [U-Boot] [PATCH v2 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD   Tetsuyuki Kobayashi
• [U-Boot] [PATCH V2 2/2] ARM: mx6: Add PCIe on SabreSDP   Stefano Babic
• [U-Boot] [Patch v2 2/2] common/board_f: Fix size variable   York Sun
• [U-Boot] [PATCH V2 2/2] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Wolfgang Denk
• [U-Boot] [PATCH V2 2/2] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Wolfgang Denk
• [U-Boot] [PATCH V2 2/2] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Pierre Aubert
• [U-Boot] [PATCH V2 2/2] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Pierre AUBERT
• [U-Boot] [PATCH v2 2/2] lsxl: rework boot scripts   Michael Walle
• [U-Boot] [PATCH v2 2/2] lsxl: rework boot scripts   Michael Walle
• [U-Boot] [PATCH v2 2/2] lsxl: rework boot scripts   Michael Walle
• [U-Boot] [PATCH v2 2/2] mx6: add example DTB for mx6qsabreauto   Masahiro Yamada
• [U-Boot] [PATCH v2 2/2] mx6: add example DTB for mx6qsabreauto   Stefano Babic
• [U-Boot] [PATCH v2 2/2] net/designware: ensure cache invalidations are aligned to ARCH_DMA_MINALIGN   Ian Campbell
• [U-Boot] [PATCH v2 2/2] patman: Avoid duplicate sign-offs   Simon Glass
• [U-Boot] [PATCH v2 2/2] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Marek Vasut
• [U-Boot] [PATCH v2 2/2] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Przemyslaw Marczak
• [U-Boot] [PATCH v2 2/4] samsung: misc: add gpt restore option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v2 2/5] net: rename and refactor eth_rand_ethaddr() function   Masahiro Yamada
• [U-Boot] [Patch v2 2/5] powerpc/freescale: Change the return value of mac_read_from_eeprom()   York Sun
• [U-Boot] [PATCH v2 2/5] TI:armv7: Change Falcon Mode DT load address   Tom Rini
• [U-Boot] [PATCH v2 2/6] ARM: tegra: i2c: add slave mode support   Andrey Danin
• [U-Boot] [PATCH v2 2/6] ARM: tegra: i2c: add slave mode support   Heiko Schocher
• [U-Boot] [PATCH v2 2/7] MIPS: move mips_io_port_base out of board.c   Paul Burton
• [U-Boot] [PATCH v2 2/7] mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate between BCH4/BCH8/BCH16   Pekon Gupta
• [U-Boot] [PATCH v2 2/8] nitrogen6x: use common board_video_skip   Eric Bénard
• [U-Boot] [PATCH v2 2/8] nitrogen6x: use common board_video_skip   Stefano Babic
• [U-Boot] [PATCH V2 2/8] OMAP3: zoom1: Configure GPMC for Ethernet   Nishanth Menon
• [U-Boot] [PATCH v2 2/9] fdt_support: refactor with fdt_find_or_add_subnode helper func   Masahiro Yamada
• [U-Boot] [PATCH V2 3/4] arm: mx5: Fix memory slowness on M53EVK   Stefano Babic
• [U-Boot] [PATCH v2 3/4] samsung: misc: add env default option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v2 3/5] blackfin: replace bfin_gen_rand_mac() with eth_random_addr()   Masahiro Yamada
• [U-Boot] [Patch v2 3/5] powerpc/mpc85xx: Fix boot_flag for calling board_init_f()   York Sun
• [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.   Tom Rini
• [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.   Jagan Teki
• [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.   Tom Rini
• [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.   Sourav Poddar
• [U-Boot] [PATCH v2 3/6] ARM: tegra: i2c: add nvec driver   Andrey Danin
• [U-Boot] [PATCH v2 3/6] ARM: tegra: i2c: add nvec driver   Heiko Schocher
• [U-Boot] [PATCH v2 3/6] ARM: tegra: i2c: add nvec driver   Andrey Danin
• [U-Boot] [PATCH v2 3/6] ARM: tegra: i2c: add nvec driver   Heiko Schocher
• [U-Boot] [PATCH v2 3/7] MIPS: define __init_end in u-boot.lds   Paul Burton
• [U-Boot] [PATCH v2 3/7] mtd: nand: omap_elm: use macros for register definitions   Pekon Gupta
• [U-Boot] [PATCH v2 3/8] mx6sabresd: use common board_video_skip   Eric Bénard
• [U-Boot] [PATCH v2 3/8] mx6sabresd: use common board_video_skip   Stefano Babic
• [U-Boot] [PATCH V2 3/8] OMAP3: zoom1: enable LAN9211   Nishanth Menon
• [U-Boot] [PATCH v2 3/9] fdt_support: delete force argument of fdt_initrd()   Masahiro Yamada
• [U-Boot] [PATCH v2 4/4] samsung: misc: keys: fix gpio key debouncing by adding 50 ms delay   Przemyslaw Marczak
• [U-Boot] [PATCH v2 4/4] samsung: misc: keys: fix gpio key debouncing by adding 50 ms delay   Gerhard Sittig
• [U-Boot] [PATCH v2 4/4] samsung: misc: keys: fix gpio key debouncing by adding 50 ms delay   Przemyslaw Marczak
• [U-Boot] [PATCH v2 4/5] fs: ubifs: drop __DATE__ and __TIME__   Masahiro Yamada
• [U-Boot] [Patch v2 4/5] powerpc/mpc86xx: Fix boot_flag for calling board_init_f()   York Sun
• [U-Boot] [PATCH v2 4/5] SPL:SPI: Add Falcon Mode support   Tom Rini
• [U-Boot] [PATCH v2 4/6] ARM: tegra: nvec: add keyboard support   Andrey Danin
• [U-Boot] [PATCH v2 4/7] board_f: call init_func_ram on MIPS   Paul Burton
• [U-Boot] [PATCH v2 4/7] mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'   Pekon Gupta
• [U-Boot] [PATCH v2 4/7] mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'   Stefan Roese
• [U-Boot] [PATCH V2 4/8] omap3: zoom1: enable common network commands   Nishanth Menon
• [U-Boot] [PATCH v2 4/8] RiOTboard and MarSBoard: add new boards support   Eric Bénard
• [U-Boot] [PATCH v2 4/8] RiOTboard and MarSBoard: add new boards support   Stefano Babic
• [U-Boot] [PATCH v2 4/9] fdt_support: delete force argument of fdt_chosen()   Masahiro Yamada
• [U-Boot] [PATCH v2 5/5] dra7xx_evm: Add QSPI_4 support, qspiboot build target   Tom Rini
• [U-Boot] [PATCH v2 5/5] kbuild: build with -Werror=date-time if the compiler supports it   Masahiro Yamada
• [U-Boot] [Patch v2 5/5] powerpc/freescale: Convert selected boards to generic board architecture   York Sun
• [U-Boot] [PATCH v2 5/6] ARM: tegra: paz00: add dt bindings for nvec   Andrey Danin
• [U-Boot] [PATCH v2 5/7] board_f: call timer_init on MIPS   Paul Burton
• [U-Boot] [PATCH v2 5/7] mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_info   Pekon Gupta
• [U-Boot] [PATCH v2 5/8] imx-common/video: add detect_hdmi   Eric Bénard
• [U-Boot] [PATCH v2 5/8] imx-common/video: add detect_hdmi   Stefano Babic
• [U-Boot] [PATCH V2 5/8] omap3: zoom1: disable JFFS2 and enable FS_GENERIC   Nishanth Menon
• [U-Boot] [PATCH v2 5/9] fdt_support: refactor fdt_fixup_stdout() function   Masahiro Yamada
• [U-Boot] [PATCH v2 6/6] ARM: tegra: paz00: enable nvec keyboard   Andrey Danin
• [U-Boot] [PATCH v2 6/7] MIPS: allow use of generic board   Paul Burton
• [U-Boot] [PATCH v2 6/7] mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch   Pekon Gupta
• [U-Boot] [PATCH v2 6/7] mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch   Stefan Roese
• [U-Boot] [PATCH v2 6/8] nitrogen6x: use common detect_hdmi   Eric Bénard
• [U-Boot] [PATCH v2 6/8] nitrogen6x: use common detect_hdmi   Stefano Babic
• [U-Boot] [PATCH V2 6/8] omap3: zoom1: enable bootz   Nishanth Menon
• [U-Boot] [PATCH v2 6/9] fdt_support: add 'const' qualifier for unchanged argument   Masahiro Yamada
• [U-Boot] [PATCH v2 7/7] MIPS: Malta: convert to generic board   Paul Burton
• [U-Boot] [PATCH v2 7/7] mtd: nand: omap: fix error-codes returned from omap-elm driver   Pekon Gupta
• [U-Boot] [PATCH v2 7/7] mtd: nand: omap: fix error-codes returned from omap-elm driver   Stefan Roese
• [U-Boot] [PATCH v2 7/8] cmd_mmc.c: Add bootbus mmc sub-command   Michael Trimarchi
• [U-Boot] [PATCH v2 7/8] cmd_mmc.c: Add bootbus mmc sub-command   Tom Rini
• [U-Boot] [PATCH v2 7/8] mx6sabresd: use common detect_hdmi   Eric Bénard
• [U-Boot] [PATCH v2 7/8] mx6sabresd: use common detect_hdmi   Stefano Babic
• [U-Boot] [PATCH V2 7/8] omap3: zoom1: fix default console   Nishanth Menon
• [U-Boot] [PATCH v2 7/9] fdt_support: fix an endian bug of fdt_fixup_memory_banks   Masahiro Yamada
• [U-Boot] [PATCH v2 8/8] embest/mx6boards: use common detect_hdmi   Eric Bénard
• [U-Boot] [PATCH v2 8/8] embest/mx6boards: use common detect_hdmi   Stefano Babic
• [U-Boot] [PATCH V2 8/8] omap3: zoom1: switch to generic ti_omap3_common config header   Nishanth Menon
• [U-Boot] [PATCH v2 8/9] fdt_support: fix an endian bug of fdt_initrd()   Masahiro Yamada
• [U-Boot] [PATCH v2 9/9] fdt_support: correct the return condition of fdt_initrd()   Masahiro Yamada
• [U-Boot] [PATCH V2] 4xx: add support for new PMC440 revision with cleanup   Stefan Roese
• [U-Boot] [PATCH v2] Add endian support macros to interrupt transfers in the EHCI driver.   Adrian Cox
• [U-Boot] [PATCH v2] Add endian support macros to interrupt transfers in the EHCI driver.   Marek Vasut
• [U-Boot] [PATCH v2] am33xx: add SSC enable macro   Yegor Yefremov
• [U-Boot] [PATCH v2] arm64 patch: gicv3 support   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot   Lukasz Majewski
• [U-Boot] [PATCH v2] arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot   Minkyu Kang
• [U-Boot] [PATCH v2] buildman: make output dir configurable   Daniel Schwierzeck
• [U-Boot] [PATCH v2] buildman: make output dir configurable   Simon Glass
• [U-Boot] [PATCH v2] common: fixed linker-list example   Mateusz Zalega
• [U-Boot] [PATCH v2] config: remove platform CONFIG_SYS_HZ definition part 4   Masahiro Yamada
• [U-Boot] [PATCH v2] cosmetic: delete misleading comment /* CONFIG_BOARDDIR */   Masahiro Yamada
• [U-Boot] [PATCH v2] dfu, nand: add medium specific polltimeout function   Heiko Schocher
• [U-Boot] [PATCH v2] dfu, nand: add medium specific polltimeout function   Marek Vasut
• [U-Boot] [Patch v2] drivers/ddr: Fix possible out of bounds error   York Sun
• [U-Boot] [Patch v2] drivers/ddr: Fix possible out of bounds error   York Sun
• [U-Boot] [PATCH v2] drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write   Shaveta Leekha
• [U-Boot] [PATCH v2] Exynos5: config: Enable FIT   Akshay Saraswat
• [U-Boot] [PATCH v2] fs: fat: Fix cache align error message in fatwrite   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] iomux-v3: Add support for mx6sl LVE bit   Fabio Estevam
• [U-Boot] [PATCH v2] iomux-v3: Add support for mx6sl LVE bit   Otavio Salvador
• [U-Boot] [PATCH v2] mmc: Handle switch error status bit in MMC card status   Andrew Gabbasov
• [U-Boot] [PATCH v2] mmc: postponed needless timer initialization   Mateusz Zalega
• [U-Boot] [PATCH V2] mmc:eSDHC: Workaround for data timeout issue on Txxx SoC   Pantelis Antoniou
• [U-Boot] [PATCH V2] mmc:eSDHC: Workaround for data timeout issue on Txxx SoC   Zhang Haijun
• [U-Boot] [PATCH v2] nand_spl: remove unused linker scripts u-boot-nand.lds   Masahiro Yamada
• [U-Boot] [PATCH v2] powerpc/85xx: add T4080 SoC support   Shengzhou Liu
• [U-Boot] [PATCH v2] powerpc/cpu/mpc85xx: Add MAC address for layer 2 switch   York Sun
• [U-Boot] [PATCH v2] powerpc/t208x: enable errata A006261, A006593, A006379   Shengzhou Liu
• [U-Boot] [PATCH v2] powerpc: mpc8xx: delete an unused source file   Wolfgang Denk
• [U-Boot] [PATCH v2] powerpc: mpc8xx: delete an unused source file   Masahiro Yamada
• [U-Boot] [PATCH v2] qe: disable qe when qe-ucode fails to be uploaded   Zhao Qiang
• [U-Boot] [PATCH v2] spi: soft_spi: Support NULL din/dout buffers   Andrew Ruder
• [U-Boot] [PATCH v2] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Masahiro Yamada
• [U-Boot] [PATCH v2] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Stephen Warren
• [U-Boot] [PATCH v2] tools: fix Makefile to clean-up fit_info and fit_check_sign   Masahiro Yamada
• [U-Boot] [PATCH V2] video: mxc_ipuv3_fb: stash frame buffer pointer in global data.   Marek Vasut
• [U-Boot] [PATCH V2] video: mxc_ipuv3_fb: stash frame buffer pointer in global data.   Eric Nelson
• [U-Boot] [PATCH V2] video: mxc_ipuv3_fb: stash frame buffer pointer in global data.   Anatolij Gustschin
• [U-Boot] [PATCH v3 0/2] kzm9g i2c bugfix and CONFIG_SYS_GENERIC_BOARD   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v3 0/2] mtd: nand: omap: add support for BCH16_ECC   Pekon Gupta
• [U-Boot] [PATCH v3 0/3] Add workaround for Cortex-A9 errata   nitin.garg at freescale.com
• [U-Boot] [PATCH v3 0/3] Add workaround for Cortex-A9 errata   nitin.garg at freescale.com
• [U-Boot] [PATCH V3 0/3] eMMC: support for Read Protected Memory Block (RPMB)   Pierre Aubert
• [U-Boot] [PATCH v3 0/3] enable support for x16 NAND devices   Pekon Gupta
• [U-Boot] [PATCH v3 0/5] Android Fastboot support   Rob Herring
• [U-Boot] [PATCH v3 0/5] Android Fastboot support   Sebastian Andrzej Siewior
• [U-Boot] [PATCH v3 0/5] Android Fastboot support   Tom Rini
• [U-Boot] [PATCH v3 0/5] Android Fastboot support   Tom Rini
• [U-Boot] [PATCH v3 0/5] Android Fastboot support   Rob Herring
• [U-Boot] [PATCH v3 0/5] ARM: refactor start.S files   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/5] ARM: refactor start.S files   Gerhard Sittig
• [U-Boot] [PATCH v3 0/5] ARM: refactor start.S files   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/9] sunxi: initial upstreamining effort   Ian Campbell
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Albert ARIBAUD
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Jon Loeliger
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Albert ARIBAUD
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Albert ARIBAUD
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Ian Campbell
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Jon Loeliger
• [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [PATCH v3 04/13] dfu: fix boards wo USB cable detection   Lukasz Majewski
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Lukasz Majewski
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Lukasz Majewski
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
• [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
• [U-Boot] [PATCH v3 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v3 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Tom Rini
• [U-Boot] [PATCH v3 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v3 1/2] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates   Pekon Gupta
• [U-Boot] [PATCH v3 1/2] usb:gadget:f_thor: code cleanup in function download_tail()   Przemyslaw Marczak
• [U-Boot] [PATCH v3 1/3] ARM: Add workaround for Cortex-A9 errata 794072   Stefano Babic
• [U-Boot] [PATCH v3 1/3] ARM: Add workaround for Cortex-A9 errata 794072   Nitin Garg
• [U-Boot] [PATCH v3 1/3] ARM: Add workaround for Cortex-A9 errata 794072   Stefano Babic
• [U-Boot] [PATCH v3 1/3] ARM: Add workaround for Cortex-A9 errata 794072   nitin.garg at freescale.com
• [U-Boot] [PATCH v3 1/3] ARM: Add workaround for Cortex-A9 errata 794072   nitin.garg at freescale.com
• [U-Boot] [PATCH V3 1/3] eMMC: add support for operations in RPMB partition   Pierre Aubert
• [U-Boot] [PATCH v3 1/3] mtd: nand: don't use read_buf for 8-bit ONFI transfers   Pekon Gupta
• [U-Boot] [PATCH v3 1/4] samsung: misc: allows using environmental macros as args in menu commands   Przemyslaw Marczak
• [U-Boot] [PATCH v3 1/4]drivers: mmc: dwmmc: enable support for DT   Minkyu Kang
• [U-Boot] [PATCH v3 1/4]drivers: mmc: dwmmc: enable support for DT   Jaehoon Chung
• [U-Boot] [PATCH v3 1/4]drivers: mmc: dwmmc: enable support for DT   Beomho Seo
• [U-Boot] [PATCH v3 1/4]drivers: mmc: dwmmc: enable support for DT   Jaehoon Chung
• [U-Boot] [PATCH v3 1/5] arm1136: move cache code from start.S to cache.c   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/5] common: introduce maximum load size   Rob Herring
• [U-Boot] [PATCH v3 1/5] common: introduce maximum load size   Tom Rini
• [U-Boot] [PATCH v3 1/5] common: introduce maximum load size   Lukasz Majewski
• [U-Boot] [PATCH v3 1/5] common: introduce maximum load size   Wolfgang Denk
• [U-Boot] [PATCH v3 1/5] common: introduce maximum load size   Rob Herring
• [U-Boot] [PATCH v3 1/5] common: introduce maximum load size   Wolfgang Denk
• [U-Boot] [PATCH v3 1/9] sunxi: add sun7i clocks and timer support.   Marek Vasut
• [U-Boot] [PATCH v3 1/9] sunxi: add sun7i clocks and timer support.   Ian Campbell
• [U-Boot] [PATCH v3 12/13] ums: always initialize mmc before ums_disk_init()   Lukasz Majewski
• [U-Boot] [PATCH v3 13/13] common: fixed linker-list example   Lukasz Majewski
• [U-Boot] [PATCH v3 2/2] am335x: update README for BCH16   Pekon Gupta
• [U-Boot] [PATCH v3 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v3 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3 2/2] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Marek Vasut
• [U-Boot] [PATCH v3 2/2] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Przemyslaw Marczak
• [U-Boot] [PATCH v3 2/2] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Lukasz Majewski
• [U-Boot] [PATCH V3 2/3] Add the function 'confirm_yesno' for interactive confirmation.   Pierre Aubert
• [U-Boot] [PATCH v3 2/3] ARM: Add workaround for Cortex-A9 errata 761320   Stefano Babic
• [U-Boot] [PATCH v3 2/3] ARM: Add workaround for Cortex-A9 errata 761320   Nitin Garg
• [U-Boot] [PATCH v3 2/3] ARM: Add workaround for Cortex-A9 errata 761320   Fabio Estevam
• [U-Boot] [PATCH v3 2/3] ARM: Add workaround for Cortex-A9 errata 761320   Stefano Babic
• [U-Boot] [PATCH v3 2/3] ARM: Add workaround for Cortex-A9 errata 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH v3 2/3] ARM: Add workaround for Cortex-A9 errata 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH v3 2/3] mtd: nand: omap: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Pekon Gupta
• [U-Boot] [PATCH V3 2/4] arm: mx5: Avoid hardcoding memory sizes on MX53QSB   Stefano Babic
• [U-Boot] [PATCH v3 2/4] samsung: misc: add gpt restore option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v3 2/5] arm: move reset_cpu from start.S into cpu.c   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/5] usb: handle NULL table in usb_gadget_get_string   Rob Herring
• [U-Boot] [PATCH v3 2/5] usb: handle NULL table in usb_gadget_get_string   Marek Vasut
• [U-Boot] [PATCH v3 2/5] usb: handle NULL table in usb_gadget_get_string   Lukasz Majewski
• [U-Boot] [PATCH v3 2/5] usb: handle NULL table in usb_gadget_get_string   Tom Rini
• [U-Boot] [PATCH v3 2/9] sunxi: add sun7i pinmux and gpio support   Ian Campbell
• [U-Boot] [PATCH v3 2/9] sunxi: add sun7i pinmux and gpio support   Marek Vasut
• [U-Boot] [PATCH V3 3/3] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Wolfgang Denk
• [U-Boot] [PATCH V3 3/3] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Pierre Aubert
• [U-Boot] [PATCH v3 3/3] MX6: Enable ARM errata workaround 794072 and 761320   Stefano Babic
• [U-Boot] [PATCH v3 3/3] MX6: Enable ARM errata workaround 794072 and 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH v3 3/3] MX6: Enable ARM errata workaround 794072 and 761320   nitin.garg at freescale.com
• [U-Boot] [PATCH v3 3/3] omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT   Pekon Gupta
• [U-Boot] [PATCH v3 3/4] samsung: misc: add env default option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v3 3/5] arm: pxa: move SP check from start.S to cpuinfo.c   Albert ARIBAUD
• [U-Boot] [PATCH v3 3/5] arm: pxa: move SP check from start.S to cpuinfo.c   Marek Vasut
• [U-Boot] [PATCH v3 3/5] image: add support for Android's boot image format   Marek Vasut
• [U-Boot] [PATCH v3 3/5] image: add support for Android's boot image format   Marek Vasut
• [U-Boot] [PATCH v3 3/5] image: add support for Android's boot image format   Lukasz Majewski
• [U-Boot] [PATCH v3 3/5] image: add support for Android's boot image format   Rob Herring
• [U-Boot] [PATCH v3 3/5] image: add support for Android's boot image format   Tom Rini
• [U-Boot] [PATCH v3 3/5] image: add support for Android's boot image format   Rob Herring
• [U-Boot] [PATCH v3 3/9] sunxi: add sun7i dram setup support   Ian Campbell
• [U-Boot] [PATCH v3 3/9] sunxi: add sun7i dram setup support   Marek Vasut
• [U-Boot] [PATCH V3 4/4] arm: mx5: Avoid hardcoding memory sizes on M53EVK   Stefano Babic
• [U-Boot] [PATCH v3 4/4] samsung: misc: keys: fix gpio key bouncing by adding 50 ms delay   Przemyslaw Marczak
• [U-Boot] [PATCH v3 4/5] arm: remove unused _end_vect and _vectors_end symbols   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Rob Herring
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Bo Shen
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Lukasz Majewski
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Rob Herring
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Tom Rini
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Marek Vasut
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Marek Vasut
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Bo Shen
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Lukasz Majewski
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Lukasz Majewski
• [U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget   Rob Herring
• [U-Boot] [PATCH v3 4/9] sunxi: add sun7i cpu, board and start of day support   Ian Campbell
• [U-Boot] [PATCH v3 5/5] arm: beagle: enable Android fastboot support   Rob Herring
• [U-Boot] [PATCH v3 5/5] arm: beagle: enable Android fastboot support   Tom Rini
• [U-Boot] [PATCH v3 5/5] arm: move exception handling out of start.S files   Albert ARIBAUD
• [U-Boot] [PATCH v3 5/9] sunxi: add support for Cubietruck booting in FEL mode   Marek Vasut
• [U-Boot] [PATCH v3 5/9] sunxi: add support for Cubietruck booting in FEL mode   Ian Campbell
• [U-Boot] [PATCH v3 6/9] sunxi: add gmac Ethernet support   Ian Campbell
• [U-Boot] [PATCH v3 6/9] sunxi: add gmac Ethernet support   Marek Vasut
• [U-Boot] [PATCH v3 6/9] sunxi: add gmac Ethernet support   Ian Campbell
• [U-Boot] [PATCH v3 6/9] sunxi: add gmac Ethernet support   Marek Vasut
• [U-Boot] [PATCH v3 6/9] sunxi: add gmac Ethernet support   Ian Campbell
• [U-Boot] [PATCH v3 6/9] sunxi: add gmac Ethernet support   Marek Vasut
• [U-Boot] [PATCH v3 7/9] sunxi: mmc support   Ian Campbell
• [U-Boot] [PATCH v3 7/9] sunxi: mmc support   Marek Vasut
• [U-Boot] [PATCH v3 8/9] spi: davinci: add support for multiple bus and chip select   Karicheri, Muralidharan
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Marek Vasut
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Marek Vasut
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Marek Vasut
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Marek Vasut
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
• [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Ian Campbell
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Marek Vasut
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Ian Campbell
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Chen-Yu Tsai
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Marek Vasut
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Chen-Yu Tsai
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Marek Vasut
• [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length   Alexey Brodkin
• [U-Boot] [PATCH v3] Fix USB keyboard polling via control endpoint   Marek Vasut
• [U-Boot] [PATCH v3] Fix USB keyboard polling via control endpoint   Adrian Cox
• [U-Boot] [PATCH v3] qe: disable qe when qe-ucode fails to be uploaded for deep sleep   Zhao Qiang
• [U-Boot] [PATCH v3] socfpga: Adding Clock Manager driver   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/2] Add keystone network driver   Murali Karicheri
• [U-Boot] [PATCH v4 0/2] Add keystone network driver   Tom Rini
• [U-Boot] [PATCH V4 0/3] eMMC: support for Read Protected Memory Block (RPMB)   Pierre Aubert
• [U-Boot] [PATCH v4 0/5] Android Fastboot support   Rob Herring
• [U-Boot] [PATCH v4 0/5] Android Fastboot support   Wolfgang Denk
• [U-Boot] [PATCH v4 0/5] Android Fastboot support   Marek Vasut
• [U-Boot] [PATCH v4 0/5] Android Fastboot support   Rob Herring
• [U-Boot] [PATCH v4 0/5] Android Fastboot support   Marek Vasut
• [U-Boot] [PATCH v4 0/5] enable support for x16 NAND devices   Pekon Gupta
• [U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot   Marc Zyngier
• [U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot   Dennis Gilmore
• [U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot   Marc Zyngier
• [U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot   Dennis Gilmore
• [U-Boot] [PATCH v4 00/13] DFU, MMC, Gadget, Goni, misc.   Mateusz Zalega
• [U-Boot] [PATCH v4 01/10] ARM: HYP/non-sec: move switch to non-sec to the last boot phase   Marc Zyngier
• [U-Boot] [PATCH v4 01/13] mmc: mmc header fix   Mateusz Zalega
• [U-Boot] [PATCH v4 02/10] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Marc Zyngier
• [U-Boot] [PATCH v4 02/13] part: header fix   Mateusz Zalega
• [U-Boot] [PATCH v4 03/10] ARM: non-sec: reset CNTVOFF to zero   Marc Zyngier
• [U-Boot] [PATCH v4 03/13] common: fixed linker-list example   Mateusz Zalega
• [U-Boot] [PATCH v4 03/13] common: fixed linker-list example   Marek Vasut
• [U-Boot] [PATCH v4 04/10] ARM: add missing HYP mode constant   Marc Zyngier
• [U-Boot] [PATCH v4 04/13] usb: dfu: fix boards wo USB cable detection   Mateusz Zalega
• [U-Boot] [PATCH v4 04/13] usb: dfu: fix boards wo USB cable detection   Marek Vasut
• [U-Boot] [PATCH v4 04/13] usb: dfu: fix boards wo USB cable detection   Lukasz Majewski
• [U-Boot] [PATCH v4 05/10] ARM: HYP/non-sec: add separate section for secure code   Marc Zyngier
• [U-Boot] [PATCH v4 05/13] mmc: postponed needless timer initialization   Mateusz Zalega
• [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM   Marc Zyngier
• [U-Boot] [PATCH v4 06/13] dfu: mmc: raw data write fix   Mateusz Zalega
• [U-Boot] [PATCH v4 07/10] ARM: HYP/non-sec: add generic ARMv7 PSCI code   Marc Zyngier
• [U-Boot] [PATCH v4 07/13] ums: always initialize mmc before ums_disk_init()   Mateusz Zalega
• [U-Boot] [PATCH v4 07/13] ums: always initialize mmc before ums_disk_init()   Lukasz Majewski
• [U-Boot] [PATCH v4 08/10] ARM: HYP/non-sec: add the option for a second-stage monitor   Marc Zyngier
• [U-Boot] [PATCH v4 08/13] am335x: dfu: disable DFU in am335x_evm SPL build   Lukasz Majewski
• [U-Boot] [PATCH v4 08/13] am335x: dfu: disable DFU in am335x_evm SPL build   Mateusz Zalega
• [U-Boot] [PATCH v4 09/10] ARM: convert arch_fixup_memory_node to a generic FDT fixup function   Marc Zyngier
• [U-Boot] [PATCH v4 09/13] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
• [U-Boot] [PATCH v4 09/13] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
• [U-Boot] [PATCH v4 09/13] USB: gadget: added a saner gadget downloader registration API   Lukasz Majewski
• [U-Boot] [PATCH v4 09/13] USB: gadget: added a saner gadget downloader registration API   Jaehoon Chung
• [U-Boot] [PATCH v4 09/13] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
• [U-Boot] [PATCH v4 1/2] keystone2: add keystone multicore navigator driver   Murali Karicheri
• [U-Boot] [PATCH v4 1/2] RiOTboard: add new board   Stefano Babic
• [U-Boot] [PATCH v4 1/2] RiOTboard: add new board   Eric Bénard
• [U-Boot] [PATCH v4 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Albert ARIBAUD
• [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition   Wolfgang Denk
• [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition   Wolfgang Denk
• [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition   Wolfgang Denk
• [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition   Pierre Aubert
• [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition   Pierre AUBERT
• [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition   Pierre AUBERT
• [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition   Pierre AUBERT
• [U-Boot] [PATCH v4 1/3] usb:gadget:f_thor: code cleanup in function download_tail()   Przemyslaw Marczak
• [U-Boot] [PATCH v4 1/5] mtd: nand: don't use read_buf for 8-bit ONFI transfers   Pekon Gupta
• [U-Boot] [PATCH v4 1/5] samsung: misc: allows using environmental macros as args in menu commands   Przemyslaw Marczak
• [U-Boot] [PATCH v4 1/5] usb: handle NULL table in usb_gadget_get_string   Rob Herring
• [U-Boot] [PATCH v4 10/10] ARM: HYP/non-sec/PSCI: emit DT nodes   Marc Zyngier
• [U-Boot] [PATCH v4 10/13] arm: goni: Update configuration for Goni target   Mateusz Zalega
• [U-Boot] [PATCH v4 11/13] arm: goni: dfu: Add support for DFU to Goni target   Mateusz Zalega
• [U-Boot] [PATCH v4 12/13] arm: goni: enable GPT command   Mateusz Zalega
• [U-Boot] [PATCH v4 13/13] arm: goni: enable USB Mass Storage   Mateusz Zalega
• [U-Boot] [PATCH v4 2/2] keystone2: net: add keystone ethernet driver   Murali Karicheri
• [U-Boot] [PATCH V4 2/3] Add the function 'confirm_yesno' for interactive   Pierre Aubert
• [U-Boot] [PATCH v4 2/3] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Przemyslaw Marczak
• [U-Boot] [PATCH v4 2/5] image: add support for Android's boot image format   Rob Herring
• [U-Boot] [PATCH v4 2/5] mtd: nand: force NAND_CMD_READID onto 8-bit bus   Pekon Gupta
• [U-Boot] [PATCH v4 2/5] samsung: misc: add gpt restore option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v4 3/3] drivers:dfu: dfu_flush(): add raw data flush to complete   Przemyslaw Marczak
• [U-Boot] [PATCH V4 3/3] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Pierre Aubert
• [U-Boot] [PATCH v4 3/5] mtd: nand: fix GET/SET_FEATURES address on 16-bit devices   Pekon Gupta
• [U-Boot] [PATCH v4 3/5] samsung: misc: add env default option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v4 3/5] usb: musb: fill in usb_gadget_unregister_driver   Rob Herring
• [U-Boot] [PATCH v4 3/5] usb: musb: fill in usb_gadget_unregister_driver   Lukasz Majewski
• [U-Boot] [PATCH v4 4/5] mtd: nand: omap: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Pekon Gupta
• [U-Boot] [PATCH v4 4/5] mtd: nand: omap: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
• [U-Boot] [PATCH v4 4/5] mtd: nand: omap: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Gupta, Pekon
• [U-Boot] [PATCH v4 4/5] mtd: nand: omap: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
• [U-Boot] [PATCH v4 4/5] samsung: misc: keys: fix gpio key bouncing by adding 50 ms delay   Przemyslaw Marczak
• [U-Boot] [PATCH v4 4/5] samsung: misc: keys: fix gpio key bouncing by adding 50 ms delay   Gerhard Sittig
• [U-Boot] [PATCH v4 4/5] samsung: misc: keys: fix gpio key bouncing by adding 50 ms delay   Gerhard Sittig
• [U-Boot] [PATCH v4 4/5] samsung: misc: keys: fix gpio key bouncing by adding 50 ms delay   Przemyslaw Marczak
• [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget   Rob Herring
• [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget   Lukasz Majewski
• [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget   Marek Vasut
• [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget   Rob Herring
• [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget   Lukasz Majewski
• [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget   Rob Herring
• [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget   Lukasz Majewski
• [U-Boot] [PATCH v4 5/5] arm: beagle: enable Android fastboot support   Rob Herring
• [U-Boot] [PATCH v4 5/5] omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT   Pekon Gupta
• [U-Boot] [PATCH v4 5/5] samsung: misc: remove download mode info screen   Przemyslaw Marczak
• [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine   York Sun
• [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine   York Sun
• [U-Boot] [PATCH v4 6/9] i2c, davinci: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
• [U-Boot] [PATCH v4] arm: ep9315: Return back Cirrus Logic EDB9315A board support   sergey kostanbaev
• [U-Boot] [PATCH v4] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Albert ARIBAUD
• [U-Boot] [PATCH v4] mpc85xx/t104x: Add deep sleep framework support   York Sun
• [U-Boot] [PATCH v4] mpc85xx/t104x: Add deep sleep framework support   Tang Yuantian
• [U-Boot] [PATCH v4] net/phy: Add support for CS4315/CS4340 PHY   Shengzhou Liu
• [U-Boot] [PATCH v4] qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"   Zhao Qiang
• [U-Boot] [PATCH V5 0/3] eMMC: support for Read Protected Memory Block (RPMB)   Pierre Aubert
• [U-Boot] [PATCH v5 0/6] PPC 85xx: Add support for QEMU's ppce500 PV machine   York Sun
• [U-Boot] [PATCH v5 0/6] PPC 85xx: Add support for QEMU's ppce500 PV machine   Alexander Graf
• [U-Boot] [PATCH v5 0/6] PPC 85xx: Add support for QEMU's ppce500 PV machine   Scott Wood
• [U-Boot] [PATCH v5 0/9] Add support for keystone2 SoC and K2HK EVM   Murali Karicheri
• [U-Boot] [PATCH v5 00/12] DFU, MMC, Gadget, Goni, misc.   Mateusz Zalega
• [U-Boot] [PATCH v5 01/12] mmc: mmc header fix   Mateusz Zalega
• [U-Boot] [PATCH v5 01/12] mmc: mmc header fix   Lukasz Majewski
• [U-Boot] [PATCH v5 01/12] mmc: mmc header fix   Pantelis Antoniou
• [U-Boot] [PATCH v5 02/12] part: header fix   Mateusz Zalega
• [U-Boot] [PATCH v5 02/12] part: header fix   Lukasz Majewski
• [U-Boot] [PATCH v5 03/12] usb: dfu: fix boards wo USB cable detection   Mateusz Zalega
• [U-Boot] [PATCH v5 03/12] usb: dfu: fix boards wo USB cable detection   Marek Vasut
• [U-Boot] [PATCH v5 04/12] dfu: mmc: raw data write fix   Mateusz Zalega
• [U-Boot] [PATCH v5 05/12] dfu: mmc: change offset base handling   Mateusz Zalega
• [U-Boot] [PATCH v5 06/12] ums: always initialize mmc before ums_disk_init()   Mateusz Zalega
• [U-Boot] [PATCH v5 07/12] am335x: dfu: disable DFU in am335x_evm SPL build   Mateusz Zalega
• [U-Boot] [PATCH v5 08/12] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
• [U-Boot] [PATCH v5 09/12] arm: goni: Update configuration for Goni target   Lukasz Majewski
• [U-Boot] [PATCH v5 09/12] arm: goni: Update configuration for Goni target   Minkyu Kang
• [U-Boot] [PATCH v5 09/12] arm: goni: Update configuration for Goni target   Mateusz Zalega
• [U-Boot] [PATCH V5 1/3] eMMC: add support for operations in RPMB partition   Pierre Aubert
• [U-Boot] [PATCH v5 1/5] samsung: misc: allows using environmental macros as args in menu commands   Przemyslaw Marczak
• [U-Boot] [PATCH v5 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c   Przemyslaw Marczak
• [U-Boot] [PATCH v5 1/9] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Murali Karicheri
• [U-Boot] [PATCH v5 10/12] arm: goni: dfu: Add support for DFU to Goni target   Mateusz Zalega
• [U-Boot] [PATCH v5 11/12] arm: goni: enable GPT command   Mateusz Zalega
• [U-Boot] [PATCH v5 12/12] arm: goni: enable USB Mass Storage   Mateusz Zalega
• [U-Boot] [PATCH V5 2/3] Add the function 'confirm_yesno' for interactive   Pierre Aubert
• [U-Boot] [PATCH v5 2/5] samsung: misc: add gpt restore option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v5 2/6] lib: uuid: code refactor for proper maintain between uuid bin and string   Przemyslaw Marczak
• [U-Boot] [PATCH v5 2/9] tools: mkimage: add support for gpimage format   Murali Karicheri
• [U-Boot] [PATCH V5 3/3] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command   Pierre Aubert
• [U-Boot] [PATCH v5 3/5] samsung: misc: add env default option to lcd menu   Przemyslaw Marczak
• [U-Boot] [PATCH v5 3/6] lib: uuid: add functions to generate UUID version 4   Przemyslaw Marczak
• [U-Boot] [PATCH v5 3/9] arm: add support for arch timer   Murali Karicheri
• [U-Boot] [PATCH v5 3/9] arm: add support for arch timer   Masahiro Yamada
• [U-Boot] [PATCH v5 3/9] arm: add support for arch timer   Andrianov, Vitaly
• [U-Boot] [PATCH v5 3/9] arm: add support for arch timer   FengHua
• [U-Boot] [PATCH v5 3/9] arm: add support for arch timer   Murali Karicheri
• [U-Boot] [PATCH v5 4/5] samsung: misc: menu: increase delay in menu main loop   Przemyslaw Marczak
• [U-Boot] [PATCH v5 4/6] new commands: uuid and guid - generate random unique identifier   Przemyslaw Marczak
• [U-Boot] [PATCH v5 4/9] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
• [U-Boot] [PATCH v5 5/5] samsung: misc: remove download mode info screen   Przemyslaw Marczak
• [U-Boot] [PATCH v5 5/6] cmd:gpt: randomly generate each partition uuid if undefined   Przemyslaw Marczak
• [U-Boot] [PATCH v5 5/9] i2c, davinci: move i2c_defs.h to the drivers/i2c directory   Murali Karicheri
• [U-Boot] [PATCH v5 6/6] trats/trats2: enable CONFIG_RANDOM_UUID   Przemyslaw Marczak
• [U-Boot] [PATCH v5 6/6] trats/trats2: enable CONFIG_RANDOM_UUID   Minkyu Kang
• [U-Boot] [PATCH v5 6/9] i2c, davinci: convert driver to new mutlibus/mutliadapter framework   Murali Karicheri
• [U-Boot] [PATCH v5 6/9] i2c, davinci: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
• [U-Boot] [PATCH v5 7/9] k2hk: add support for k2hk SOC and EVM   Murali Karicheri
• [U-Boot] [PATCH v5 7/9] k2hk: add support for k2hk SOC and EVM   Ivan Khoronzhuk
• [U-Boot] [PATCH v5 8/9] spi: davinci: add support for multiple bus and chip select   Murali Karicheri
• [U-Boot] [PATCH v5 9/9] k2hk-evm: add configuration for spi1 and spi2 support   Murali Karicheri
• [U-Boot] [PATCH v5] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Sergey Kostanbev
• [U-Boot] [PATCH v6 0/4] Exynos5: Add GPIO numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v6 0/4] Exynos5: Add GPIO numbering feature   Przemyslaw Marczak
• [U-Boot] [PATCH v6 0/9] Add support for keystone2 SoC and K2HK EVM   Murali Karicheri
• [U-Boot] [PATCH v6 0/9] Add support for keystone2 SoC and K2HK EVM   Tom Rini
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Simon Glass
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Lukasz Majewski
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Lukasz Majewski
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Minkyu Kang
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Simon Glass
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Przemyslaw Marczak
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Przemyslaw Marczak
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Simon Glass
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Lukasz Majewski
• [U-Boot] [PATCH v6 1/4] EXYNOS5: Add gpio pin numbering feature   Simon Glass
• [U-Boot] [PATCH v6 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c   Przemyslaw Marczak
• [U-Boot] [PATCH v6 1/9] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Murali Karicheri
• [U-Boot] [PATCH v6 2/4] S5P: Rename GPIO definitions   Akshay Saraswat
• [U-Boot] [PATCH v6 2/4] S5P: Rename GPIO definitions   Simon Glass
• [U-Boot] [PATCH v6 2/4] S5P: Rename GPIO definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v6 2/6] lib: uuid: code refactor for proper maintain between uuid bin and string   Przemyslaw Marczak
• [U-Boot] [PATCH v6 2/9] tools: mkimage: add support for gpimage format   Murali Karicheri
• [U-Boot] [PATCH v6 2/9] tools: mkimage: add support for gpimage format   Wolfgang Denk
• [U-Boot] [PATCH v6 2/9] tools: mkimage: add support for gpimage format   Wolfgang Denk
• [U-Boot] [PATCH v6 2/9] tools: mkimage: add support for gpimage format   Gerhard Sittig
• [U-Boot] [PATCH v6 2/9] tools: mkimage: add support for gpimage format   Tom Rini
• [U-Boot] [PATCH v6 3/4] EXYNOS5: GPIO: Support GPIO Command for EXYNOS5   Akshay Saraswat
• [U-Boot] [PATCH v6 3/4] EXYNOS5: GPIO: Support GPIO Command for EXYNOS5   Simon Glass
• [U-Boot] [PATCH v6 3/4] EXYNOS5: GPIO: Support GPIO Command for EXYNOS5   Przemyslaw Marczak
• [U-Boot] [PATCH v6 3/6] lib: uuid: add functions to generate UUID version 4   Przemyslaw Marczak
• [U-Boot] [PATCH v6 3/6] lib: uuid: add functions to generate UUID version 4   Przemyslaw Marczak
• [U-Boot] [PATCH v6 3/9] arm: add support for arch timer   Murali Karicheri
• [U-Boot] [PATCH v6 4/4] Config: Exynos5: Enable Generic GPIO and CMD configs   Simon Glass
• [U-Boot] [PATCH v6 4/4] Config: Exynos5: Enable Generic GPIO and CMD configs   Simon Glass
• [U-Boot] [PATCH v6 4/4] Config: Exynos5: Enable Generic GPIO and CMD configs   Akshay Saraswat
• [U-Boot] [PATCH v6 4/4] Config: Exynos5: Enable Generic GPIO and CMD configs   Simon Glass
• [U-Boot] [PATCH v6 4/4] Config: Exynos5: Enable Generic GPIO and CMD configs   Akshay Saraswat
• [U-Boot] [PATCH v6 4/6] new commands: uuid and guid - generate random unique identifier   Przemyslaw Marczak
• [U-Boot] [PATCH v6 4/9] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
• [U-Boot] [PATCH v6 5/6] cmd:gpt: randomly generate each partition uuid if undefined   Przemyslaw Marczak
• [U-Boot] [PATCH v6 5/9] i2c, davinci: move i2c_defs.h to the drivers/i2c directory   Murali Karicheri
• [U-Boot] [PATCH v6 6/6] trats/trats2: enable CONFIG_RANDOM_UUID   Przemyslaw Marczak
• [U-Boot] [PATCH v6 6/9] i2c, davinci: convert driver to new mutlibus/mutliadapter framework   Murali Karicheri
• [U-Boot] [PATCH v6 7/9] k2hk: add support for k2hk SOC and EVM   Murali Karicheri
• [U-Boot] [PATCH v6 8/9] spi: davinci: add support for multiple bus and chip select   Murali Karicheri
• [U-Boot] [PATCH v6 8/9] spi: davinci: add support for multiple bus and chip select   Jagan Teki
• [U-Boot] [PATCH v6 9/9] k2hk-evm: add configuration for spi1 and spi2 support   Murali Karicheri
• [U-Boot] [PATCH v7 0/2] Exynos5: Add GPIO numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v7 1/2] EXYNOS: Add GPIO pin numbering and rename definitions   Akshay Saraswat
• [U-Boot] [PATCH v7 1/3] QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR   York Sun
• [U-Boot] [PATCH v7 2/2] Config: Enable Generic GPIO and CMD configs   Wolfgang Denk
• [U-Boot] [PATCH v7 2/2] Config: Enable Generic GPIO and CMD configs   Akshay Saraswat
• [U-Boot] [PATCH v7 2/3] QE/U-QE: Add U-QE support   York Sun
• [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to t1040qds   York Sun
• [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to t1040qds   York Sun
• [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to t1040qds   York Sun
• [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to t1040qds   qiang.zhao at freescale.com
• [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Scott Wood
• [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Chin Liang See
• [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH v7] socfpga: Adding Scan Manager driver   Pavel Machek
• [U-Boot] [PATCH v7] socfpga: Adding Scan Manager driver   Michal Simek
• [U-Boot] [PATCH v7] socfpga: Adding Scan Manager driver   Steffen Trumtrar
• [U-Boot] [PATCH v7] socfpga: Adding Scan Manager driver   Pavel Machek
• [U-Boot] [PATCH v7] socfpga: Adding Scan Manager driver   Michal Simek
• [U-Boot] [PATCH v8 0/2] Exynos5: Add GPIO numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Jaehoon Chung
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Simon Glass
• [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v8 2/2] S5P: Exynos: Config: Enable Generic GPIO and CMD configs   Akshay Saraswat
• [U-Boot] [PATCH v9 0/2] S5P: Exynos: Add GPIO numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v9 0/2] S5P: Exynos: Add GPIO numbering feature   Przemyslaw Marczak
• [U-Boot] [PATCH v9 0/2] S5P: Exynos: Add GPIO numbering feature   Akshay Saraswat
• [U-Boot] [PATCH v9 0/2] S5P: Exynos: Add GPIO numbering feature   Przemyslaw Marczak
• [U-Boot] [PATCH v9 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
• [U-Boot] [PATCH v9 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v9 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
• [U-Boot] [PATCH v9 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Przemyslaw Marczak
• [U-Boot] [PATCH v9 2/2] S5P: Exynos: Config: Enable Generic GPIO and CMD configs   Akshay Saraswat
• [U-Boot] [PATCH/RFC] Reintegration of ns9750   Albert ARIBAUD
• [U-Boot] [PATCH] 2c: modify i2c_read API to handle multi-bytes writes   Shaveta Leekha
• [U-Boot] [PATCH] 2c: modify i2c_read API to handle multi-bytes writes   York Sun
• [U-Boot] [PATCH] Add board_mmc_init(...) function for init mmc1 only   Hannes Petermaier
• [U-Boot] [PATCH] aes: make apply_cbc_chain_data non-static   Stephen Warren
• [U-Boot] [PATCH] aes: make apply_cbc_chain_data non-static   Simon Glass
• [U-Boot] [PATCH] aes: make apply_cbc_chain_data non-static   Marek Vasut
• [U-Boot] [PATCH] ahci: Fix data abort on multiple scsi resets.   Roger Quadros
• [U-Boot] [PATCH] am335x: pepper: Add Gumstix Pepper AM335x-based machine   Ash Charles
• [U-Boot] [PATCH] am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or NOR_BOOT   Wolfgang Denk
• [U-Boot] [PATCH] am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or NOR_BOOT   Tom Rini
• [U-Boot] [PATCH] am335x_evm: Drop SPI SPL support from the default build   Tom Rini
• [U-Boot] [PATCH] am335x_evm: Drop SPI SPL support from the default build   Tom Rini
• [U-Boot] [PATCH] am33xx: add SSC enable macro   yegorslists at googlemail.com
• [U-Boot] [PATCH] am33xx: add SSC enable macro   Tom Rini
• [U-Boot] [PATCH] am33xx: add SSC enable macro   Yegor Yefremov
• [U-Boot] [PATCH] am33xx: add SSC enable macro   Tom Rini
• [U-Boot] [PATCH] am33xx: add support for beaglebone NAND cape   Pekon Gupta
• [U-Boot] [PATCH] am43xx_evm: Drop SPI SPL   Tom Rini
• [U-Boot] [PATCH] am43xx_evm: Drop SPI SPL   Tom Rini
• [U-Boot] [PATCH] ar8031: modify the config func of ar8031 to ar8021_config   Zhao Qiang
• [U-Boot] [PATCH] ar8031: modify the config func of ar8031 to ar8021_config   York Sun
• [U-Boot] [PATCH] AR8035/phy: Enable autonegotiation function for ar8035   Scott Wood
• [U-Boot] [PATCH] AR8035/phy: Enable autonegotiation function for ar8035   Xie Xiaobo
• [U-Boot] [PATCH] arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais image   Christian Riesch
• [U-Boot] [PATCH] arm, da850: staticize funtions   Manish Badarkhe
• [U-Boot] [PATCH] Arm64 fix a bug of vbar_el3 initialization   fenghua at phytium.com.cn
• [U-Boot] [PATCH] ARM: exynos: remove the unused code   Jaehoon Chung
• [U-Boot] [PATCH] ARM: exynos: remove the unused code   Jaehoon Chung
• [U-Boot] [PATCH] ARM: exynos: remove the unused code   Przemyslaw Marczak
• [U-Boot] [PATCH] ARM: exynos: remove the unused code   Jaehoon Chung
• [U-Boot] [PATCH] arm: fdt_control: fix a build error with CONFIG_OF_EMBED=y   Masahiro Yamada
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: highbank: convert to generic board   Rob Herring
• [U-Boot] [PATCH] ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD   Eric Nelson
• [U-Boot] [PATCH] ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD   Marek Vasut
• [U-Boot] [PATCH] ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD   Stefano Babic
• [U-Boot] [PATCH] ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x   Stefano Babic
• [U-Boot] [PATCH] ARM: mxs: Add OCOTP driver   Stefano Babic
• [U-Boot] [PATCH] ARM: Samsung: s5p_goni: maintainer update   Mateusz Zalega
• [U-Boot] [PATCH] ARM: Samsung: s5p_goni: maintainer update   Minkyu Kang
• [U-Boot] [PATCH] ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: use a CPU freq that all SKUs can support   Stephen Warren
• [U-Boot] [PATCH] arm: vf610: add DDR_SEL_PAD_CONTR register   stefan at agner.ch
• [U-Boot] [PATCH] arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot   Lukasz Majewski
• [U-Boot] [PATCH] arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot   Minkyu Kang
• [U-Boot] [PATCH] arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot   Lukasz Majewski
• [U-Boot] [PATCH] ARM:tegra20: Remove aes debug prints   Tom Rini
• [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way   Leo Yan
• [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way   Leo Yan
• [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way   FengHua
• [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way   Albert ARIBAUD
• [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way   Scott Wood
• [U-Boot] [PATCH] armv8: Flush dcache before switching to EL2   FengHua
• [U-Boot] [PATCH] armv8: Flush dcache before switching to EL2   Albert ARIBAUD
• [U-Boot] [PATCH] axs101 - increase EEPROM page write delay from 32 to 64 msec   Alexey Brodkin
• [U-Boot] [PATCH] axs101: bump DDR size from 256 to 512 Mb   Alexey Brodkin
• [U-Boot] [PATCH] board/freescale: Move CRC32 offset in NXID v1 data format   Ebony Zhu
• [U-Boot] [PATCH] board/t1042rdb_pi: Disable CONFIG_QE and CONFIG_U_QE   Prabhakar Kushwaha
• [U-Boot] [PATCH] board/t1042rdb_pi: Disable CONFIG_QE and CONFIG_U_QE   York Sun
• [U-Boot] [PATCH] board/t104xrdb: Add support of CPLD   Prabhakar Kushwaha
• [U-Boot] [PATCH] board: samsung: delete unused source files   Mateusz Zalega
• [U-Boot] [PATCH] board_r: return 0 from show_model_r   Paul Burton
• [U-Boot] [PATCH] board_r: return 0 from show_model_r   Simon Glass
• [U-Boot] [PATCH] boards.cfg: fix a configuration error of ep8248 board   Heiko Schocher
• [U-Boot] [PATCH] boards.cfg: fix a configuration error of ep8248 board   Masahiro Yamada
• [U-Boot] [PATCH] boards.cfg: move more boards with invalid emails to Orphan   Masahiro Yamada
• [U-Boot] [PATCH] boards.cfg: update highbank maintainer email   Rob Herring
• [U-Boot] [PATCH] bootm: set max decompression size for LZO   Kees Cook
• [U-Boot] [PATCH] bootm: set max decompression size for LZO   Simon Glass
• [U-Boot] [PATCH] build: Use filechk rules to create and update u-boot.lds   Jon Loeliger
• [U-Boot] [PATCH] build:arm: Remove setting of CROSS_COMPILE environment variable   Masahiro Yamada
• [U-Boot] [PATCH] build:arm: Remove setting of CROSS_COMPILE environment variable   Lukasz Majewski
• [U-Boot] [PATCH] build:arm: Remove setting of CROSS_COMPILE environment variable   Albert ARIBAUD
• [U-Boot] [PATCH] build:arm: Remove setting of CROSS_COMPILE environment variable   Albert ARIBAUD
• [U-Boot] [PATCH] buildman: make output dir configurable   Simon Glass
• [U-Boot] [PATCH] buildman: make output dir configurable   Daniel Schwierzeck
• [U-Boot] [PATCH] buildman: make output dir configurable   Simon Glass
• [U-Boot] [PATCH] cmd_time: do not show ticks   Masahiro Yamada
• [U-Boot] [PATCH] common: fixed linker-list example   Mateusz Zalega
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Wolfgang Denk
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Wolfgang Denk
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Fabio Estevam
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   czankel
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Fabio Estevam
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Fabio Estevam
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Chris Zankel
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Michael Ellerman
• [U-Boot] [PATCH] common: image: Allow mkimage to build a uImage for extensa   Fabio Estevam
• [U-Boot] [PATCH] compulab: eeprom: enable any i2c driver   Ilya Ledvich
• [U-Boot] [PATCH] compulab: eeprom: enable any i2c driver   Ilya Ledvich
• [U-Boot] [PATCH] config: enable CMD_BMP when API+LCD is enabled   Stephen Warren
• [U-Boot] [PATCH] config: enable CMD_BMP when API+LCD is enabled   Simon Glass
• [U-Boot] [PATCH] config: enable CMD_BMP when API+LCD is enabled   Stephen Warren
• [U-Boot] [PATCH] config: enable CONFIG_API in distro config   Rob Herring
• [U-Boot] [PATCH] config: k2hk_evm: Add generic board support   Ivan Khoronzhuk
• [U-Boot] [PATCH] config: k2hk_evm: Add generic board support   Ivan Khoronzhuk
• [U-Boot] [PATCH] config: remove platform CONFIG_SYS_HZ definition part 4   Masahiro Yamada
• [U-Boot] [PATCH] config: remove platform CONFIG_SYS_HZ definition part 4   Bo Shen
• [U-Boot] [PATCH] config:trats2: Change u-boot's TEXT_BASE from 0x78100000 to 0x43e00000   Minkyu Kang
• [U-Boot] [PATCH] cosmetic: delete misleading comment /* CONFIG_BOARDDIR */   Masahiro Yamada
• [U-Boot] [PATCH] dfu:fix: Replace wrong return value with proper one   Marek Vasut
• [U-Boot] [PATCH] dfu:fix: Replace wrong return value with proper one   Lukasz Majewski
• [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Steve Rae
• [U-Boot] [PATCH] doc: README.generic-board: Fix typo   Fabio Estevam
• [U-Boot] [PATCH] doc: README.generic-board: Fix typo   Simon Glass
• [U-Boot] [PATCH] doc:power:pmic: Add doc entry for PMIC(v2) framework   Lukasz Majewski
• [U-Boot] [PATCH] doc:power:pmic: Add doc entry for PMIC(v2) framework   Simon Glass
• [U-Boot] [PATCH] driver/fsl_ifc: Add a function to finalize CS0 address binding   York Sun
• [U-Boot] [PATCH] driver/mmc: fix compile warnings   York Sun
• [U-Boot] [PATCH] drivers/ddr: Fix klockworks warnings   York Sun
• [U-Boot] [PATCH] drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write   Shaveta Leekha
• [U-Boot] [PATCH] drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write   Heiko Schocher
• [U-Boot] [PATCH] drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write   Shaveta
• [U-Boot] [PATCH] e1000: remove redundant assignment   David Müller
• [U-Boot] [PATCH] e1000: remove redundant assignment   "David Müller (ELSOFT AG)"
• [U-Boot] [PATCH] e1000: remove redundant assignment   Joe Hershberger
• [U-Boot] [PATCH] Enable big-endian processors to use EHCI interrupt transfers   Marek Vasut
• [U-Boot] [PATCH] Enable big-endian processors to use EHCI interrupt transfers   Marek Vasut
• [U-Boot] [PATCH] Enable big-endian processors to use EHCI interrupt transfers   Adrian Cox
• [U-Boot] [PATCH] Enable big-endian processors to use EHCI interrupt transfers   Adrian Cox
• [U-Boot] [PATCH] env_eeprom: Assign default environment during board_init_f   Michal Simek
• [U-Boot] [PATCH] env_flash.c: Drop unused variables   Tom Rini
• [U-Boot] [PATCH] env_flash.c: Drop unused variables   Tom Rini
• [U-Boot] [PATCH] Exynos5: config: Enable FIT   Akshay Saraswat
• [U-Boot] [PATCH] Exynos5: config: Enable FIT   Simon Glass
• [U-Boot] [PATCH] exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT   andrey.konovalov at linaro.org
• [U-Boot] [PATCH] exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT   Marek Vasut
• [U-Boot] [PATCH] fat: Define MAX_CLUSTSIZE only if not defined in config   Michal Simek
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Adrian Cox
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Wolfgang Denk
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Adrian Cox
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Wolfgang Denk
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Marek Vasut
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Adrian Cox
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Marek Vasut
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Wolfgang Denk
• [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint   Marek Vasut
• [U-Boot] [PATCH] freescale: m5253demo: fix unused-but-set-variable warnings   Masahiro Yamada
• [U-Boot] [PATCH] fs/fat: correct FAT16/12 file finding in root dir   Josh Wu
• [U-Boot] [PATCH] fs: fat: Fix cache align error message in fatwrite to use USB media   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] fs: fat: Fix cache align error message in fatwrite to use USB media   Hector Palacios
• [U-Boot] [PATCH] fs: fat: Fix cache align error message in fatwrite to use USB media   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] fsl/pci: Add workaround for erratum A-005434   Chunhe Lan
• [U-Boot] [PATCH] fsl/usb: Add Differential SYSCLK config support T1040   Nikhil Badola
• [U-Boot] [PATCH] fsl/usb: Fix phy type for Second USB controller   York Sun
• [U-Boot] [PATCH] fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0   Nikhil Badola
• [U-Boot] [PATCH] fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0   York Sun
• [U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A007075   York Sun
• [U-Boot] [PATCH] hush shell: Avoid string write overflow when entering max cmd length   Kristian Otnes
• [U-Boot] [PATCH] i2c: zynq: Fixed compilation errors when using DEBUG   Michal Simek
• [U-Boot] [PATCH] imx6: ventana: fix system-serial dt property   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: add HDMI and LVDS display capability   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: Convert to generic board   Tim Harvey
• [U-Boot] [PATCH] iomux-v3: Add support for mx6sl LVE bit   Fabio Estevam
• [U-Boot] [PATCH] iomux-v3: Add support for mx6sl LVE bit   Otavio Salvador
• [U-Boot] [PATCH] iomux-v3: Add support for mx6sl LVE bit   Fabio Estevam
• [U-Boot] [PATCH] iomux-v3: Add support for mx6sl LVE bit   Otavio Salvador
• [U-Boot] [PATCH] iomux-v3: Add support for mx6sl LVE bit   Fabio Estevam
• [U-Boot] [PATCH] iomux-v3: Add support for mx6sl LVE bit   Fabio Estevam
• [U-Boot] [PATCH] kbuild: add user-supplied CPPFLAGS, AFLAGS and CFLAGS   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: allow null board for spl build   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: create a build directory automatically for out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: docbook: sync with Linux Kernel v3.15-rc1   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: fix a bug in regeneration of linker scripts   Andreas Bießmann
• [U-Boot] [PATCH] kbuild: fix a bug in regeneration of linker scripts   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: Fix trailing whitespaces   Michal Simek
• [U-Boot] [PATCH] kbuild: sync with Linux Kernel v3.15-rc1   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: sync with Linux Kernel v3.15-rc1   Tom Rini
• [U-Boot] [PATCH] kbuild: sync with Linux Kernel v3.15-rc1   Tom Rini
• [U-Boot] [PATCH] lib/sha256: fix compile on some hosts   Andreas Bießmann
• [U-Boot] [PATCH] lib/sha256: fix compile on some hosts   Bo Shen
• [U-Boot] [PATCH] lib/sha256: fix compile on some hosts   Heiko Schocher
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Wolfgang Denk
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Tom Rini
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Wolfgang Denk
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Tom Rini
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   thomas.langer at lantiq.com
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Masahiro Yamada
• [U-Boot] [PATCH] lib: Add CONFIG_FDT_IGNORE_FIXUP_MEMORY_NODE   Tom Rini
• [U-Boot] [PATCH] MAKEALL: remove hard-coded MIPS boards   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: drop incaip board   Daniel Schwierzeck
• [U-Boot] [PATCH] mmc: fsl_esdhc: add controller reset in case of data related errors too   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: fsl_esdhc: fix calculation of timeout for data transactions   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: Handle switch error status bit in MMC card status   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: Handle switch error status bit in MMC card status   Gabbasov, Andrew
• [U-Boot] [PATCH] mmc: Handle switch error status bit in MMC card status   Gabbasov, Andrew
• [U-Boot] [PATCH] mmc: postponed needless timer initialization   Mateusz Zalega
• [U-Boot] [PATCH] mmc: postponed needless timer initialization   Pantelis Antoniou
• [U-Boot] [PATCH] mpc85xx: Add deep sleep support on T104xRDB   Tang Yuantian
• [U-Boot] [PATCH] mpc85xx: Add deep sleep support on T104xRDB   York Sun
• [U-Boot] [PATCH] mtd: nand: omap_gpmc: Fix update of read_ecc in oob   Gupta, Pekon
• [U-Boot] [PATCH] mtd: nand: omap_gpmc: Fix update of read_ecc in oob   Marek Belisko
• [U-Boot] [PATCH] mx6: fix weird formatting in imx6q-sabreauto.dts   Stefano Babic
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Fabio Estevam
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Marek Vasut
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Fabio Estevam
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Marek Vasut
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Sam Catch
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Jagan Teki
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Marek Vasut
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Jagan Teki
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Marek Vasut
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Jagan Teki
• [U-Boot] [PATCH] mx6slevk: Add SPI NOR flash support   Stefano Babic
• [U-Boot] [PATCH] NAND: Add Micron MT29F16G identifier   Chunhe Lan
• [U-Boot] [PATCH] nand_spl: remove unused linker scripts u-boot-nand.lds   Masahiro Yamada
• [U-Boot] [PATCH] nand_spl: remove unused linker scripts u-boot-nand.lds   Stefan Roese
• [U-Boot] [PATCH] net/designware: call phy_connect_dev() to properly setup phylib device   Ian Campbell
• [U-Boot] [PATCH] net/phy: Fix PHY id for VSC8514   York Sun
• [U-Boot] [PATCH] net: phy/cortina: Add four phy addresses support   Chunhe Lan
• [U-Boot] [PATCH] net: phy/vitesse: Add support for VSC8664 phy module   Chunhe Lan
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Fabio Estevam
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Eric Nelson
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Fabio Estevam
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Eric Nelson
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Fabio Estevam
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Stefano Babic
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Troy Kisky
• [U-Boot] [PATCH] nitrogen6x: Fix the PAD settings for the ECSPI chipselect   Troy Kisky
• [U-Boot] [PATCH] omap3: igep00x0: fix NAND_BOOT for igep_0020 and igep_0030   Enric Balletbo Serra
• [U-Boot] [PATCH] omap3: igep00x0: fix NAND_BOOT for igep_0020 and igep_0030   Pekon Gupta
• [U-Boot] [PATCH] omap3: igep00x0: fix NAND_BOOT for igep_0020 and igep_0030   Gupta, Pekon
• [U-Boot] [PATCH] omap3: igep00x0: fix NAND_BOOT for igep_0020 and igep_0030   Tom Rini
• [U-Boot] [PATCH] omap3: igep00x0: fix NAND_BOOT for igep_0020 and igep_0030   Gupta, Pekon
• [U-Boot] [PATCH] omap4: duovero: Add Gumstix DuoVero machine.   Ash Charles
• [U-Boot] [PATCH] patman: Don't request full names from get_maintainer   Doug Anderson
• [U-Boot] [PATCH] patman: Don't request full names from get_maintainer   Simon Glass
• [U-Boot] [PATCH] patman: Don't request full names from get_maintainer   Doug Anderson
• [U-Boot] [PATCH] powerpc/85xx: add T4080 SoC support   Shengzhou Liu
• [U-Boot] [PATCH] powerpc/85xx: Add T4240RDB board support   Chunhe Lan
• [U-Boot] [PATCH] powerpc/85xx: Enhance get_sys_info() to check clocking mode   Vijay Rai
• [U-Boot] [PATCH] powerpc/85xx: Enhance get_sys_info() to check clocking mode   York Sun
• [U-Boot] [PATCH] powerpc/85xx: Fix e6500 L2 cache stash IDs   York Sun
• [U-Boot] [PATCH] powerpc/fman/memac: use default MDIO_HOLD value   shh.xie at gmail.com
• [U-Boot] [PATCH] Powerpc/mpc8536DS: Increase SPI/SD uboot Image size to 768K   Haijun Zhang
• [U-Boot] [PATCH] Powerpc/mpc8536DS: Increase SPI/SD uboot Image size to 768K   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Remove QE firmware copy from NAND   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Remove QE firmware copy from NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/mpc85xx: Remove QE firmware copy from NAND   Scott Wood
• [U-Boot] [PATCH] powerpc/mpc85xx: Remove QE firmware copy from NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for BSC9132QDS   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx:Update FM1 clock select and shift for B4420   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/mpc85xx:Update FM1 clock select and shift for B4420   York Sun
• [U-Boot] [PATCH] powerpc/T1040: add mtdparts suppport for T104xRDB and T1040QDS   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/T1040: add mtdparts suppport for T104xRDB and T1040QDS   York Sun
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   Dongsheng Wang
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   Priyanka Jain
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   Dongsheng.Wang at freescale.com
• [U-Boot] [PATCH] powerpc/t1040qds: Remove Video - HDMI support   York Sun
• [U-Boot] [PATCH] powerpc/t1040rdb: added a break in switch case   shh.xie at gmail.com
• [U-Boot] [PATCH] powerpc/t1040rdb: added a break in switch case   York Sun
• [U-Boot] [PATCH] powerpc/t208x: enable errata A006261, A006593, A006379   Shengzhou Liu
• [U-Boot] [PATCH] powerpc: Increase u-boot size for selected boards   Dirk Eibach
• [U-Boot] [PATCH] powerpc: Increase u-boot size for selected boards   York Sun
• [U-Boot] [PATCH] powerpc: Increase u-boot size for selected boards   Heiko Schocher
• [U-Boot] [PATCH] powerpc: Increase u-boot size for selected boards   York Sun
• [U-Boot] [PATCH] powerpc: Increase u-boot size for selected boards   York Sun
• [U-Boot] [PATCH] powerpc: mpc8xx: delete an unused source file   Wolfgang Denk
• [U-Boot] [PATCH] powerpc: mpc8xx: delete an unused source file   Masahiro Yamada
• [U-Boot] [PATCH] qe: disable qe when qe-ucode fails to be uploaded   Zhao Qiang
• [U-Boot] [PATCH] Revert "build: Use filechk rules to create and update u-boot.lds"   Masahiro Yamada
• [U-Boot] [PATCH] Revert "build: Use filechk rules to create and update u-boot.lds"   Masahiro Yamada
• [U-Boot] [PATCH] Revert "build: Use filechk rules to create and update u-boot.lds"   Jon Loeliger
• [U-Boot] [PATCH] Revert "Start the deprecation process for generic board"   Tom Rini
• [U-Boot] [PATCH] Revert "Start the deprecation process for generic board"   Tom Rini
• [PATCH] rtc: add support maxim dallas rtc ds1347   Raghavendra Ganiga
• [U-Boot] [PATCH] rtc: add support maxim dallas rtc ds1347   RAGHAVENDRA GANIGA
• [U-Boot] [PATCH] sandbox: ignore sandbox.dtb   Masahiro Yamada
• [U-Boot] [PATCH] sandbox: ignore sandbox.dtb   Simon Glass
• [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Masahiro Yamada
• [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Simon Glass
• [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Masahiro Yamada
• [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Simon Glass
• [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Masahiro Yamada
• [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Simon Glass
• [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Masahiro Yamada
• [U-Boot] [PATCH] sandbox: set sandbox's vendor as null   Masahiro Yamada
• [U-Boot] [PATCH] sandbox: set sandbox's vendor as null   Simon Glass
• [U-Boot] [PATCH] serial: nsl16550: add hw flow control support   Murali Karicheri
• [U-Boot] [PATCH] sf: params: Added support for Spansion S25FL512S_512K   Michal Simek
• [U-Boot] [PATCH] sh: delete an unused source file   Masahiro Yamada
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Bo Shen
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Stephen Warren
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Stefano Babic
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Michal Simek
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Andreas Bießmann
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Tim Harvey
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Masahiro Yamada
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Masahiro Yamada
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Tom Rini
• [U-Boot] [PATCH] Start the deprecation process for generic board   York Sun
• [U-Boot] [PATCH] Start the deprecation process for generic board   Simon Glass
• [U-Boot] [PATCH] t1040rdb/qe: add QE support for T1040RDB   York Sun
• [U-Boot] [PATCH] tools: env: Add aes.c placeholder   Marek Vasut
• [U-Boot] [PATCH] tools: env: Add aes.c placeholder   Alexey Brodkin
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefan Agner
• [U-Boot] [PATCH] tools: make imxheader size align on page size   stefan at agner.ch
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefan Agner
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefano Babic
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefano Babic
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefano Babic
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefan Agner
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefan Agner
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefano Babic
• [U-Boot] [PATCH] tools: make imxheader size align on page size   Stefano Babic
• [U-Boot] [PATCH] trats2: config: fix: Set default console to ttySAC2   Minkyu Kang
• [U-Boot] [PATCH] trats2: config: fix: Set default console to ttySAC2   Lukasz Majewski
• [U-Boot] [PATCH] trats: config: fix: Set default console to ttySAC2   Minkyu Kang
• [U-Boot] [PATCH] trats: config: fix: Set default console to ttySAC2   Lukasz Majewski
• [U-Boot] [PATCH] ums: respect CONFIG_USB_CABLE_CHECK   Stephen Warren
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: gadget: allow ci_udc to build with new gadget framework   Stephen Warren
• [U-Boot] [PATCH] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Marek Vasut
• [U-Boot] [PATCH] usb:gadget:f_thor: fix write to filesystem by add dfu_flush()   Przemyslaw Marczak
• [U-Boot] [PATCH] ventana: fixed comments in eeprom header   Tim Harvey
• [U-Boot] [PATCH] ventana: fixed comments in eeprom header   Stefano Babic
• [U-Boot] [PATCH] ventana: remove redundant include   Tim Harvey
• [U-Boot] [PATCH] ventana: remove redundant include   Stefano Babic
• [U-Boot] [PATCH] video: mxc_ipuv3_fb: stash frame buffer pointer in global data.   Marek Vasut
• [U-Boot] [PATCH] video: mxc_ipuv3_fb: stash frame buffer pointer in global data.   Eric Nelson
• [U-Boot] [PATCH] video: mxc_ipuv3_fb: stash frame buffer pointer in global data.   Otavio Salvador
• [U-Boot] [PATCH] video: mxc_ipuv3_fb: stash frame buffer pointer in global data.   Eric Nelson
• [U-Boot] [PATCH] woodburn_sd: Remove CONFIG_BOOT_INTERNAL   Stefano Babic
• [U-Boot] [PATCH][v2] board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config   York Sun
• [U-Boot] [PATCH][v2] driver/net/fm/memac_phy: Initialize mdio_clock for SoCs wih FMANv3   Priyanka Jain
• [U-Boot] [PATCH][v2] driver/net/fm/memac_phy: Initialize mdio_clock for SoCs wih FMANv3   York Sun
• [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add Differential SYSCLK config support T1040   Nikhil Badola
• [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add Differential SYSCLK config support T1040   York Sun
• [U-Boot] [PATCH][v2] powerpc/mpc8xxx: SECURE BOOT- Disable law 0 for non PBL platforms   York Sun
• [U-Boot] [PATCH][v2] powerpc/p1010rdb: SECURE BOOT enabled for NAND   York Sun
• [U-Boot] [PATCH][v2] powerpc/T4QDS: add two stage boot of nand/sd   shh.xie at gmail.com
• [U-Boot] [PATCH][v5] board/t104xrdb: Add support of CPLD   Prabhakar Kushwaha
• [U-Boot] [PATCHv2 00/10] mmc: code cleanup and support DDR mode   Jaehoon Chung
• [U-Boot] [PATCHv2 00/10] mmc: code cleanup and support DDR mode   Lukasz Majewski
• [U-Boot] [PATCHv2 00/10] mmc: code cleanup and support DDR mode   Pantelis Antoniou
• [U-Boot] [PATCHv2 01/10] mmc: s5p_sdhci: add the s5p_sdhci_core_init function   Jaehoon Chung
• [U-Boot] [PATCHv2 02/10] ARM: exynos: board: change the mmc/sd init sequence   Jaehoon Chung
• [U-Boot] [PATCHv2 03/10] ARM: exynos: clock: modify the set_mmc_clk for exynos4   Jaehoon Chung
• [U-Boot] [PATCHv2 04/10] mmc: exynos_dw_mmc: restore the property into host   Jaehoon Chung
• [U-Boot] [PATCHv2 05/10] mmc: remove the unnecessary define and fix the wrong bit control   Jaehoon Chung
• [U-Boot] [PATCHv2 06/10] mmc: support the DDR mode for eMMC   Jaehoon Chung
• [U-Boot] [PATCHv2 07/10] mmc: dw_mmc: support the DDR mode   Jaehoon Chung
• [U-Boot] [PATCHv2 08/10] ARM: dts: exnyos: enable dw-mmc controller   Jaehoon Chung
• [U-Boot] [PATCHv2 09/10] mmc: exynos_dw_mmc: enable the DDR mode   Jaehoon Chung
• [U-Boot] [PATCHv2 10/10] ARM: exynos4: enable the dwmmc configuration   Jaehoon Chung
• [U-Boot] [PATCHv2] ARM: exynos: remove the unused code   Jaehoon Chung
• [U-Boot] [PATCHv3 00/13] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
• [U-Boot] [PATCHv3 00/13] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
• [U-Boot] [PATCHv3 01/13] arm: exynos: pinmux: add sdmmc4 gpio configratuion   Jaehoon Chung
• [U-Boot] [PATCHv3 02/13] arm: exynos: clock: Remove exynos4x12_set_mmc_clk function   Jaehoon Chung
• [U-Boot] [PATCHv3 03/13] board: trats2: Enable device tree on Trats2   Jaehoon Chung
• [U-Boot] [PATCHv3 04/13] ARM: exynos: board: change the mmc/sd init sequence   Jaehoon Chung
• [U-Boot] [PATCHv3 05/13] ARM: exynos: clock: modify the set_mmc_clk for exynos4   Jaehoon Chung
• [U-Boot] [PATCHv3 06/13] mmc: exynos_dw_mmc: restore the property into host   Jaehoon Chung
• [U-Boot] [PATCHv3 07/13] mmc: remove the unnecessary define and fix the wrong bit control   Jaehoon Chung
• [U-Boot] [PATCHv3 08/13] mmc: support the DDR mode for eMMC   Jaehoon Chung
• [U-Boot] [PATCHv3 09/13] mmc: dw_mmc: support the DDR mode   Jaehoon Chung
• [U-Boot] [PATCHv3 10/13] ARM: dts: exnyos: enable dw-mmc controller   Jaehoon Chung
• [U-Boot] [PATCHv3 11/13] mmc: exynos_dw_mmc: enable the DDR mode   Jaehoon Chung
• [U-Boot] [PATCHv3 12/13] ARM: exynos4: enable the dwmmc configuration   Jaehoon Chung
• [U-Boot] [PATCHv3 13/13] mmc: s5p_sdhci: add the s5p_sdhci_core_init function   Jaehoon Chung
• [U-Boot] [Port] Ecounter a problem while Compiling uboot with android toolchain   liu tao
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [Question] bardrate both in gd_t and bd_t   Masahiro Yamada
• [U-Boot] [Question] bardrate both in gd_t and bd_t   Tom Rini
• [U-Boot] [Question] bardrate both in gd_t and bd_t   Simon Glass
• [U-Boot] [Question] bardrate both in gd_t and bd_t   Wolfgang Denk
• [U-Boot] [Question] bardrate both in gd_t and bd_t   Masahiro Yamada
• [U-Boot] [Question] bardrate both in gd_t and bd_t   Wolfgang Denk
• [U-Boot] [Question] bardrate both in gd_t and bd_t   Masahiro Yamada
• [U-Boot] [Question] How is the Falcon mode working   Frank Ihle
• [U-Boot] [Question] How is the Falcon mode working   Stefano Babic
• [U-Boot] [Question] i.MX6 HIgh Assurance Boot (Secure Boot) support in U-Boot versions >= 2013   Igor Bezukh
• [U-Boot] [Question] i.MX6 HIgh Assurance Boot (Secure Boot) support in U-Boot versions >= 2013   Stefano Babic
• [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Masahiro Yamada
• [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Michal Simek
• [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Heshsham Abdul Basit
• [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Masahiro Yamada
• [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Masahiro Yamada
• [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Michal Simek
• [U-Boot] [RESEND: PATCH] serial: nsl16550: add hw flow control support   Murali Karicheri
• [U-Boot] [RFC PATCH 0/2] Add atmel ROM code image   Andreas Bießmann
• [U-Boot] [RFC PATCH 0/2] Add atmel ROM code image   Bo Shen
• [U-Boot] [RFC PATCH 0/3] Remove CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD}   Masahiro Yamada
• [U-Boot] [RFC PATCH 0/5] introduce get_maintainer.pl   Daniel Schwierzeck
• [U-Boot] [RFC PATCH 1/2] mkimage: add atmelimage   Andreas Bießmann
• [U-Boot] [RFC PATCH 1/2] mkimage: add atmelimage   Bo Shen
• [U-Boot] [RFC PATCH 1/2] mkimage: add atmelimage   Andreas Bießmann
• [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support   Masahiro Yamada
• [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support   Wolfgang Denk
• [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support   Masahiro Yamada
• [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support   Wolfgang Denk
• [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support   Masahiro Yamada
• [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support   Masahiro Yamada
• [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support   Stephen Warren
• [U-Boot] [RFC PATCH 1/5] scripts: add script for converting boards.cfg to MAINTAINERS   Daniel Schwierzeck
• [U-Boot] [RFC PATCH 2/2] arm:at91: enable ROM loadable atmel image   Bo Shen
• [U-Boot] [RFC PATCH 2/2] arm:at91: enable ROM loadable atmel image   Andreas Bießmann
• [U-Boot] [RFC PATCH 2/3] cmd_pxe: remove SoC, ARCH path from pxe_default_path   Masahiro Yamada
• [U-Boot] [RFC PATCH 2/3] cmd_pxe: remove SoC, ARCH path from pxe_default_path   Rob Herring
• [U-Boot] [RFC PATCH 2/3] cmd_pxe: remove SoC, ARCH path from pxe_default_path   Stephen Warren
• [U-Boot] [RFC PATCH 2/5] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] [RFC PATCH 2/5] MAINTAINERS: add initial version   Wolfgang Denk
• [U-Boot] [RFC PATCH 3/3] mkconfig: Do not define CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD} in config.h.   Masahiro Yamada
• [U-Boot] [RFC PATCH 3/3] mkconfig: Do not define CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD} in config.h.   Stephen Warren
• [U-Boot] [RFC PATCH 3/3] mkconfig: Do not define CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD} in config.h.   Lukasz Majewski
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Daniel Schwierzeck
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Wolfgang Denk
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Masahiro Yamada
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Daniel Schwierzeck
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Masahiro Yamada
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Daniel Schwierzeck
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Wolfgang Denk
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Albert ARIBAUD
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Masahiro Yamada
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Albert ARIBAUD
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Wolfgang Denk
• [U-Boot] [RFC PATCH 3/5] MAINTAINERS.boards: add initial version   Wolfgang Denk
• [U-Boot] [RFC PATCH 4/5] get_maintainer.pl: import script from linux 3.14   Daniel Schwierzeck
• [U-Boot] [RFC PATCH 5/5] get_maintainer.pl: adapt to U-Boot tree   Daniel Schwierzeck
• [U-Boot] [RFC PATCH] bd_info: remove bi_barudrate member from struct bd_info   Masahiro Yamada
• [U-Boot] [RFC PATCH] bd_info: remove bi_barudrate member from struct bd_info   Michal Simek
• [U-Boot] [RFC PATCH] MIPS: incaip: move board specific code out of generic code   Wolfgang Denk
• [U-Boot] [RFC PATCH] MIPS: incaip: move board specific code out of generic code   Daniel Schwierzeck
• [U-Boot] [RFC PATCH] MIPS: incaip: move board specific code out of generic code   Daniel Schwierzeck
• [U-Boot] [RFC PATCH] MIPS: incaip: move board specific code out of generic code   Wolfgang Denk
• [U-Boot] [RFC PATCH] MIPS: incaip: move board specific code out of generic code   Daniel Schwierzeck
• [U-Boot] [RFC] am33xx: add spread spectrum clock (SSC) support   Yegor Yefremov
• [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Masahiro Yamada
• [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Wolfgang Denk
• [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Masahiro Yamada
• [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Andreas Bießmann
• [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Wolfgang Denk
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   York Sun
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   Wolfgang Denk
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   York Sun
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   Wolfgang Denk
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   Simon Glass
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   Scott Wood
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   Scott Wood
• [U-Boot] [RFC] RFC: convert MPC8536DS to use generic board   York Sun
• [U-Boot] [RFC][PATCH] fdt: Remove fdt_fixup_memory function   Tom Rini
• [U-Boot] [RFC][PATCH] fdt: Remove fdt_fixup_memory function   Wolfgang Denk
• [U-Boot] [RFC][PATCH] fdt: Remove fdt_fixup_memory function   Tom Rini
• [U-Boot] [RFC][PATCH] fdt: Remove fdt_fixup_memory function   Wolfgang Denk
• [U-Boot] [RFC][PATCH] fdt: Remove fdt_fixup_memory function   Tom Rini
• [U-Boot] [trini at ti.com: [PATCH] ARM:tegra20: Remove aes debug prints]   Tom Warren
• [U-Boot] [U-Boot, 02/11] powerpc: remove MBX and MBX860T boards support   Tom Rini
• [U-Boot] [U-Boot, 1/2] TI:armv7: Switch to CONFIG_SYS_BOARD_GENERIC   Tom Rini
• [U-Boot] [U-Boot, 1/3] pcnet: access descriptor rings & init block uncached   Tom Rini
• [U-Boot] [U-Boot, 2/2] TI:omap3: Convert omap3_beagle to ti_omap3_common.h   Tom Rini
• [U-Boot] [U-Boot, 2/3] pcnet: align rx buffers for cache invalidation   Tom Rini
• [U-Boot] [U-Boot, 3/3] pcnet: force ordering of descriptor accesses   Tom Rini
• [U-Boot] [U-Boot, v2] powerpc: mpc8xx: delete an unused source file   Tom Rini
• [U-Boot] [U-Boot, 04/11] powerpc: remove ADS860, FADS823, FADS850SAR, FADS860T support   Tom Rini
• [U-Boot] [U-Boot, 05/11] powerpc: remove RPXClassic, RPXlite boards support   Tom Rini
• [U-Boot] [U-Boot, v2, 2/5] TI:armv7: Change Falcon Mode DT load address   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] TI: Add, use a DEFAULT_LINUX_BOOT_ENV environment string   Tom Rini
• [U-Boot] [U-Boot, v2, 1/5] TI:omap5: Move CONFIG_ENV_SIZE to board config files   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] am335x_evm: Update the ramdisk args, we pass things in just fine via DT   Tom Rini
• [U-Boot] [U-Boot, V2, 2/4] aes: Move the AES-128-CBC encryption function to common code   Stephen Warren
• [U-Boot] [U-Boot, v2, 3/3] am43xx_evm: Update the ramdisk args, we pass things in just fine via DT   Tom Rini
• [U-Boot] [U-Boot, v2, 3/5] spi: ti_qspi: Add delay for successful bulk erase.   Tom Rini
• [U-Boot] [U-Boot, v2, 5/5] dra7xx_evm: Add QSPI_4 support, qspiboot build target   Tom Rini
• [U-Boot] [U-Boot, v2] arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot   Tom Rini
• [U-Boot] [U-Boot, v2] tools: fix Makefile to clean-up fit_info and fit_check_sign   Tom Rini
• [U-Boot] [U-Boot, v3, 03/10] env_mmc.c: Remove NULL check on tmp_env1/2   Tom Rini
• [U-Boot] [U-Boot, v3, 07/10] README: Add CONFIG_SPL_OS_BOOT to README   Tom Rini
• [U-Boot] [U-Boot, v3, 01/10] fw_env.c: Switch get_config to use '%ms' in sscanf   Tom Rini
• [U-Boot] [U-Boot, v3, 02/10] env_mmc.c: Allow environment to be used within SPL   Tom Rini
• [U-Boot] [U-Boot, v3, 04/10] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL   Tom Rini
• [U-Boot] [U-Boot, v3, 05/10] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL   Tom Rini
• [U-Boot] [U-Boot, v3, 06/10] am335x_evm: Make SPL_OS also check the boot_os variable for falcon mode   Tom Rini
• [U-Boot] [U-Boot, v3, 08/10] README.falcon: Document environment variables for falcon mode   Tom Rini
• [U-Boot] [U-Boot, v3, 09/10] a3m071: Make spl_start_uboot test like getenv_yesno does   Tom Rini
• [U-Boot] [U-Boot, v3, 10/10] spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to boot   Tom Rini
• [U-Boot] [U-Boot, v6, 6/6] trats/trats2: enable CONFIG_RANDOM_UUID   Tom Rini
• [U-Boot] [U-Boot, v6, 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c   Tom Rini
• [U-Boot] [U-Boot, v6, 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c   Przemyslaw Marczak
• [U-Boot] [U-Boot, v6, 2/6] lib: uuid: code refactor for proper maintain between uuid bin and string   Tom Rini
• [U-Boot] [U-Boot, v6, 3/6] lib: uuid: add functions to generate UUID version 4   Tom Rini
• [U-Boot] [U-Boot, v6, 4/6] new commands: uuid and guid - generate random unique identifier   Tom Rini
• [U-Boot] [U-Boot, v6, 5/6] cmd:gpt: randomly generate each partition uuid if undefined   Tom Rini
• [U-Boot] [U-Boot,01/11] powerpc: remove NX823 board support   Tom Rini
• [U-Boot] [U-Boot,03/11] powerpc: remove genietv board support   Tom Rini
• [U-Boot] [U-Boot,06/11] powerpc: remove RPXsuper board support   Tom Rini
• [U-Boot] [U-Boot,07/11] powerpc: remove rsdproto board support   Tom Rini
• [U-Boot] [U-Boot,08/11] powerpc: remove MOUSSE board support   Tom Rini
• [U-Boot] [U-Boot,09/11] powerpc: remove EVB64260 board support   Tom Rini
• [U-Boot] [U-Boot,10/11] arm: remove lubbock board support   Tom Rini
• [U-Boot] [U-Boot,v2,4/5] SPL:SPI: Add Falcon Mode support   Tom Rini
• [U-Boot] [U-Boot,v2] buildman: make output dir configurable   Tom Rini
• [U-Boot] [u-boot-release] [PATCH 0/0][v2] powerpc: Add support 2 stage boot loader for corenet platform   York Sun
• [U-Boot] [u-boot-release] [PATCH][v5] board/t104xrdb: Add support of CPLD   York Sun
• [U-Boot] [U-boot] 2014.04 release code boot failed on ARMv8 FVPmodel   TigerLiu at via-alliance.com
• [U-Boot] [U-boot] 2014.04 release code boot failed on ARMv8 FVP model   TigerLiu at via-alliance.com
• [U-Boot] [U-BOOT] [PATCH v3] powerpc/t104xrdb: Unification of T104xRDB header files   York Sun
• [U-Boot] [U-boot] how to compile vexpress_aemv8a with latest u-boot code   Albert ARIBAUD
• [U-Boot] [U-boot] Is there generic code to detect nand chip's ecc bits?   Scott Wood
• [U-Boot] [U-boot] Is there generic code to detect nand chip's ecc bits?   TigerLiu at via-alliance.com
• [U-Boot] [u-boot][coreboot-x86] Incremental Make fails   Hua Yanghao
• [U-Boot] [u-boot][coreboot-x86] Incremental Make fails   Masahiro Yamada
• [U-Boot] [u-boot][coreboot-x86] Incremental Make fails   Hua Yanghao
• [U-Boot] [u-boot][coreboot-x86] Incremental Make fails   Masahiro Yamada
• [U-Boot] [UBOOT][PATCH 0/5] dra7: Add partition table entry and qspi boot config   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 1/5] board.cfg: dra7: Add QSPI boot config.   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 2/5] qspi: add support for qspi4 device   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 3/5] configs: dra7-evm: Add mtd parts info for qspi.   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 3/5] configs: dra7-evm: Add mtd parts info for qspi.   Tom Rini
• [U-Boot] [UBOOT][PATCH 3/5] configs: dra7-evm: Add mtd parts info for qspi.   Jagan Teki
• [U-Boot] [UBOOT][PATCH 3/5] configs: dra7-evm: Add mtd parts info for qspi.   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 4/5] configs: dra7-evm: change uboot offset   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 5/5] spi: ti_qspi: Add delay for successful bulk erase.   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 5/5] spi: ti_qspi: Add delay for successful bulk erase.   Jagan Teki
• [U-Boot] [UBOOT][PATCH 5/5] spi: ti_qspi: Add delay for successful bulk erase.   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 5/5] spi: ti_qspi: Add delay for successful bulk erase.   Jagan Teki
• [U-Boot] [UBOOT][PATCH] mtd: spi: fix quad bit set path   Sourav Poddar
• [U-Boot] [v2] powerpc/mpc8572ds: Increase u-boot size to 768KB   York Sun
• [U-Boot] [v2] powerpc/mpc8572ds: Increase u-boot size to 768KB   Heiko Schocher
• [U-Boot] Add support for SPI NOR on the Freescale MCIMX6SLEVK Board   Sam Catch
• [U-Boot] Add support for SPI NOR on the Freescale MCIMX6SLEVK Board   Sam Catch
• [U-Boot] aes: make apply_cbc_chain_data non-static   Tom Rini
• [U-Boot] ahci: Fix cache align error messages   Roger Quadros
• [U-Boot] ahci: Fix cache align error messages   Eli Nidam
• [U-Boot] ahci: Fix data abort on multiple scsi resets.   Tom Rini
• [U-Boot] altera socfpga: mmc boot fails as soon as I enable DEBUG   Pavel Machek
• [U-Boot] am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or NOR_BOOT   Tom Rini
• [U-Boot] am33xx : bit-flip correction in oob   Belisko Marek
• [U-Boot] am33xx : bit-flip correction in oob   Belisko Marek
• [U-Boot] am33xx : bit-flip correction in oob   Gupta, Pekon
• [U-Boot] am33xx : bit-flip correction in oob   Gupta, Pekon
• [U-Boot] am33xx : bit-flip correction in oob   Belisko Marek
• [U-Boot] am33xx : bit-flip correction in oob   Gupta, Pekon
• [U-Boot] am33xx : bit-flip correction in oob   Belisko Marek
• [U-Boot] am33xx : bit-flip correction in oob   Gupta, Pekon
• [U-Boot] Antw: Re: [Question] How is the Falcon mode working   Stefano Babic
• [U-Boot] AP94 u-boot network failure   donce donce
• [U-Boot] AP94 u-boot network failure   dontz
• [U-Boot] AP94 u-boot network failure   dontz
• [U-Boot] AP94 u-boot network failure   dontz
• [U-Boot] arm, da850: staticize funtions   Tom Rini
• [U-Boot] ARM: zynq: sdhci clock frequency init question   Krunal Desai
• [U-Boot] ARM:tegra20: Remove aes debug prints   Tom Rini
• [U-Boot] beagle-bone fdt booting problem   Simon Glass
• [U-Boot] blackfin: make name_to_gpio be a weak symbol   Tom Rini
• [U-Boot] board/freescale/mx6slevk: Add support for SPI NOR on the Freescale MCIMX6SLEVK Board   Sam Catch
• [U-Boot] board/freescale/mx6slevk: Add support for SPI NOR on the Freescale MCIMX6SLEVK Board   Fabio Estevam
• [U-Boot] board/freescale/mx6slevk: Add support for SPI NOR on the Freescale MCIMX6SLEVK Board   Fabio Estevam
• [U-Boot] board/freescale/mx6slevk: Add support for SPI NOR on the Freescale MCIMX6SLEVK Board   Nikolay Dimitrov
• [U-Boot] board: altera: delete unused source files   Tom Rini
• [U-Boot] board: dave: delete unused source files   Tom Rini
• [U-Boot] board: esd: remove remainders of dead boards   Tom Rini
• [U-Boot] board: evb64260: delete an unused source file   Tom Rini
• [U-Boot] board: hidden_dragon: remove an unused source file   Tom Rini
• [U-Boot] board: Marvell: delete an unused source file   Tom Rini
• [U-Boot] board: ppmc8260: delete an unused source file   Tom Rini
• [U-Boot] board: prodrive: delete unused source files   Tom Rini
• [U-Boot] board: samsung: delete unused source files   Tom Rini
• [U-Boot] board: sandpoint: delete an unused source file   Tom Rini
• [U-Boot] board_r: return 0 from show_model_r   Tom Rini
• [U-Boot] boards.cfg: move more boards with invalid emails to Orphan   Tom Rini
• [U-Boot] Booting image from ARM for different architecture   Simon Glass
• [U-Boot] bootm: set max decompression size for LZO   Tom Rini
• [U-Boot] Bug in buildsystem for SPL LDSCRIPT   Andreas Bießmann
• [U-Boot] Bug in buildsystem for SPL LDSCRIPT   Masahiro Yamada
• [U-Boot] Bug in buildsystem for SPL LDSCRIPT   Andreas Bießmann
• [U-Boot] Bug in buildsystem for SPL LDSCRIPT   Masahiro Yamada
• [U-Boot] Bug in buildsystem for SPL LDSCRIPT   Andreas Bießmann
• [U-Boot] build: Use filechk rules to create and update u-boot.lds   Tom Rini
• [U-Boot] Chain loading an u-boot from an u-boot   Simon Glass
• [U-Boot] Chain loading an u-boot from an u-boot   Stefano Babic
• [U-Boot] Chain loading an u-boot from an u-boot   Helmut Raiger
• [U-Boot] Changes for boards I maintain   Alexey Brodkin
• [U-Boot] Changes for boards I maintain   Tom Rini
• [U-Boot] config: enable CONFIG_API in distro config   Tom Rini
• [U-Boot] config: enable CONFIG_API in distro config   Stephen Warren
• [U-Boot] config: enable CONFIG_API in distro config   Tom Warren
• [U-Boot] config: enable CONFIG_API in distro config   Tom Rini
• [U-Boot] config: enable CONFIG_API in distro config   Tom Rini
• [U-Boot] config: enable CONFIG_API in distro config   Stephen Warren
• [U-Boot] config: enable CONFIG_API in distro config   Rob Herring
• [U-Boot] config: enable CONFIG_API in distro config   Rob Herring
• [U-Boot] config: enable CONFIG_API in distro config   Stephen Warren
• [U-Boot] config: enable CONFIG_API in distro config   Simon Glass
• [U-Boot] config: enable CONFIG_API in distro config   Rob Herring
• [U-Boot] config: enable CONFIG_API in distro config   Leif Lindholm
• [U-Boot] config: enable CONFIG_API in distro config   Ian Campbell
• [U-Boot] config: enable CONFIG_API in distro config   Ian Campbell
• [U-Boot] config: enable CONFIG_API in distro config   Ian Campbell
• [U-Boot] config: enable CONFIG_API in distro config   Simon Glass
• [U-Boot] config: enable CONFIG_API in distro config   Dennis Gilmore
• [U-Boot] config: enable CONFIG_API in distro config   Simon Glass
• [U-Boot] config: enable CONFIG_API in distro config   Stephen Warren
• [U-Boot] CONFIG_ARMV7_NONSEC on altera soc (alignment issues ?)   Albert ARIBAUD
• [U-Boot] CONFIG_ARMV7_NONSEC on altera soc (alignment issues ?)   Tim Sander
• [U-Boot] CONFIG_LOADADDR vs CONFIG_SYS_LOAD_ADDR   Masahiro Yamada
• [U-Boot] CONFIG_REMAKE_ELF for aarch64   FengHua
• [U-Boot] CONFIG_REMAKE_ELF for aarch64   York Sun
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Albert ARIBAUD
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Tom Rini
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Wolfgang Denk
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Tom Rini
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Wolfgang Denk
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Tom Rini
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Wolfgang Denk
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Tom Rini
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Wolfgang Denk
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Tom Rini
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Wolfgang Denk
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Tom Rini
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Albert ARIBAUD
• [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?   Wolfgang Denk
• [U-Boot] cosmetic: README.scrapyard: fix false removed date and commit   Tom Rini
• [U-Boot] cosmetic: README.scrapyard: sort in reverse chronological order   Tom Rini
• [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file   Tom Taylor
• [U-Boot] data abort in omap_gpio   Andreas Bießmann
• [U-Boot] Data abort in omap_gpio   Andreas Bießmann
• [U-Boot] Data abort in omap_gpio   Tom Rini
• [U-Boot] Data abort in omap_gpio   Andreas Bießmann
• [U-Boot] Data abort in omap_gpio   Andreas Bießmann
• [U-Boot] Different Port for TFTP communication   Mario Albrecht
• [U-Boot] Different Port for TFTP communication   Wolfgang Denk
• [U-Boot] Different Port for TFTP communication   Wolfgang Denk
• [U-Boot] Different Port for TFTP communication   Nikolay Dimitrov
• [U-Boot] Different Port for TFTP communication   Nikolay Dimitrov
• [U-Boot] doc:power:pmic: Add doc entry for PMIC(v2) framework   Tom Rini
• [U-Boot] e1000: remove redundant assignment   Tom Rini
• [U-Boot] Failure on attempt to build env tools   Alexey Brodkin
• [U-Boot] Failure on attempt to build env tools   Marek Vasut
• [U-Boot] FEC_MXC leftovers   Nikolay Dimitrov
• [U-Boot] FIT image AES support and PPC4xx/85xx boards   Tom Rini
• [U-Boot] FIT image AES support and PPC4xx/85xx boards   York Sun
• [U-Boot] FIT image AES support and PPC4xx/85xx boards   Tom Rini
• [U-Boot] FIT image AES support and PPC4xx/85xx boards   York Sun
• [U-Boot] FIT image AES support and PPC4xx/85xx boards   York Sun
• [U-Boot] floppy: delete unused files   Tom Rini
• [U-Boot] FSL eSPI driver is a mess, hack attached.   York Sun
• [U-Boot] FSL eSPI driver is a mess, hack attached.   Mingkai.Hu at freescale.com
• [U-Boot] fw_(printenv/setenv) and serial console have different env variables   Andrei Mihut
• [U-Boot] fw_(printenv/setenv) and serial console have different env variables   Suriyan Ramasami
• [U-Boot] fw_printenv - 'Warning: Bad CRC, using default environment'   shobin b
• [U-Boot] fw_printenv - 'Warning: Bad CRC, using default environment'   Wolfgang Denk
• [U-Boot] Fwd: [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Jon Loeliger
• [U-Boot] Fwd: [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] Fwd: [Question] i.MX6 HIgh Assurance Boot (Secure Boot) support in U-Boot versions >= 2013   Igor Bezukh
• [U-Boot] Getting started with SPL   Heshsham Abdul Basit
• [U-Boot] Getting started with SPL   Michal Simek
• [U-Boot] High Assurance Booting   Jyoti Dubey
• [U-Boot] How can I save U-Boot env vars to HUSH shell vars.   James Chargin
• [U-Boot] How can I save U-Boot env vars to HUSH shell vars.   Wolfgang Denk
• [U-Boot] How can I save U-Boot env vars to HUSH shell vars.   James Chargin
• [U-Boot] How can I save U-Boot env vars to HUSH shell vars.   Wolfgang Denk
• [U-Boot] How can I save U-Boot env vars to HUSH shell vars.   James Chargin
• [U-Boot] How can I save U-Boot env vars to HUSH shell vars.   Wolfgang Denk
• [U-Boot] How to disable MAC address for usb_ether   Xuebing Wang
• [U-Boot] How to disable MAC address for usb_ether   Albert ARIBAUD
• [U-Boot] How to disable MAC address for usb_ether   Tom Rini
• [U-Boot] How to extract files from U-Boot image file, LZMA-compressed?   kebjo
• [U-Boot] How to test vlan in u-boot   diya
• [U-Boot] i.MX6SL using 1.8V eMMC   Otavio Salvador
• [U-Boot] iMX6 PCie inbound traffic not working   "David Müller (ELSOFT AG)"
• [U-Boot] iMX6 PCie inbound traffic not working   Krunal Desai
• [U-Boot] iMX6 PCie inbound traffic not working   "David Müller (ELSOFT AG)"
• [U-Boot] Interrupt autoboot by GPIO   Florian Meier
• [U-Boot] Interrupt autoboot by GPIO   Wolfgang Denk
• [U-Boot] Interrupt autoboot by GPIO   Florian Meier
• [U-Boot] IPv6 in U-BOOT   chris packham
• [U-Boot] Is it OK to use target code from host tools   Albert ARIBAUD
• [U-Boot] Is it OK to use target code from host tools   Scott Wood
• [U-Boot] kbuild: add user-supplied CPPFLAGS, AFLAGS and CFLAGS   Tom Rini
• [U-Boot] kbuild: do not use $(BOARD) to specify exact object name   Tom Rini
• [U-Boot] kbuild: docbook: sync with Linux Kernel v3.15-rc1   Tom Rini
• [U-Boot] kbuild: fix a bug in regeneration of linker scripts   Tom Rini
• [U-Boot] kbuild: sync with Linux Kernel v3.15-rc1   Tom Rini
• [U-Boot] kbuild: use boolean macros to select tegra*-common directory   Tom Rini
• [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Xuebing Wang
• [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Xuebing Wang
• [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Ian Lepore
• [U-Boot] Merge conflicts between ARM and mainline U-Boot trees   Albert ARIBAUD
• [U-Boot] Merge conflicts between ARM and mainline U-Boot trees   Marek Vasut
• [U-Boot] Merge conflicts between ARM and mainline U-Boot trees   Lukasz Majewski
• [U-Boot] Merge conflicts between ARM and mainline U-Boot trees   Piotr Wilczek
• [U-Boot] Merge conflicts between ARM and mainline U-Boot trees   Pantelis Antoniou
• [U-Boot] Merge conflicts between ARM and mainline U-Boot trees   Przemyslaw Marczak
• [U-Boot] Micron PC28F00AP30 flash support   Andy Pont
• [U-Boot] Micron PC28F00AP30 flash support   Stefan Roese
• [U-Boot] mmc changes in v2014.04-rc3 cause problems when using mmc in SPL   Hans de Goede
• [U-Boot] mmc changes in v2014.04-rc3 cause problems when using mmc in SPL   Tom Rini
• [U-Boot] mmc changes in v2014.04-rc3 cause problems when using mmc in SPL   Hans de Goede
• [U-Boot] MMC: proposal to support multiple physical partitions   Steve Rae
• [U-Boot] MMC: proposal to support multiple physical partitions   Pantelis Antoniou
• [U-Boot] MMC: proposal to support multiple physical partitions   Steve Rae
• [U-Boot] Modify go to allow chain loading a second u-boot   Helmut Raiger
• [U-Boot] Modify go to allow chain loading a second u-boot   Simon Glass
• [U-Boot] Modify go to allow chain loading a second u-boot   Helmut Raiger
• [U-Boot] Modify go to allow chain loading a second u-boot   Wolfgang Denk
• [U-Boot] Modify go to allow chain loading a second u-boot   Rob Herring
• [U-Boot] Modify go to allow chain loading a second u-boot   Helmut Raiger
• [U-Boot] mtd: delete unused files   Tom Rini
• [U-Boot] mx28: U-Boot fails to boot with VDD5V only power configuration   Ankur Patel
• [U-Boot] mx28: U-Boot fails to boot with VDD5V only power configuration   Ankur Patel
• [U-Boot] NAND SPL on imx6   Otavio Salvador
• [U-Boot] NAND SPL on imx6   Stefano Babic
• [U-Boot] ocotp   Nogradi Peter
• [U-Boot] Open Source Organizational Culture   Storm-Olsen, Marius
• [U-Boot] patchwork down again?   York Sun
• [U-Boot] please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] please pull u-boot-arc master   Tom Rini
• [U-Boot] please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
• [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Karicheri, Muralidharan
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] post tests in arm uboot   shobin b
• [U-Boot] post tests in arm uboot   Stephen Warren
• [U-Boot] powerpc/t208xqds: fix nor chip selection when nand boot   York Sun
• [U-Boot] pull request for u-boot-tegra/master info ARM/master   Stephen Warren
• [U-Boot] pull request for u-boot-tegra/master info ARM/master   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master info ARM/master   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master info ARM/master   Tom Warren
• [U-Boot] pull request for u-boot-tegra/master info ARM/master   Stephen Warren
• [U-Boot] pull request for u-boot-tegra/master info ARM/master   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] Pull request: u-boot-mmc 02042014   Pantelis Antoniou
• [U-Boot] Pull request: u-boot-mmc 02042014   Tom Rini
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Tom Rini
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
• [U-Boot] Re   Frank Ihle
• [U-Boot] Revert "build: Use filechk rules to create and update u-boot.lds"   Tom Rini
• [U-Boot] Socfpga preloader signing patch   Pavel Machek
• [U-Boot] Socfpga preloader signing patch   Pavel Machek
• [U-Boot] Socfpga preloader signing patch   Gerhard Sittig
• [U-Boot] Socfpga preloader signing patch   Charles Manning
• [U-Boot] Socfpga preloader signing patch   Gerhard Sittig
• [U-Boot] Some PowerPC boards are broken   Masahiro Yamada
• [U-Boot] Some PowerPC boards are broken   Heiko Schocher
• [U-Boot] SPI NOR MTD's   Jeff Horn
• [U-Boot] SPI NOR MTD's   Daniel Schwierzeck
• [U-Boot] standalone: delete an unused source file   Tom Rini
• [U-Boot] Start the deprecation process for generic board   Marek Vasut
• [U-Boot] Start the deprecation process for generic board   Simon Glass
• [U-Boot] Start the deprecation process for generic board   Marek Vasut
• [U-Boot] Start the deprecation process for generic board   Tom Rini
• [U-Boot] Start the deprecation process for generic board   Marek Vasut
• [U-Boot] Start the deprecation process for generic board   Lukasz Majewski
• [U-Boot] Start the deprecation process for generic board   Simon Glass
• [U-Boot] Start the deprecation process for generic board   Lukasz Majewski
• [U-Boot] State of ARMv7 PSCI support?   Jon Loeliger
• [U-Boot] Strange CFI flash problem   Matthias Weißer
• [U-Boot] Strange CFI flash problem   Wolfgang Denk
• [U-Boot] Strange CFI flash problem   Matthias Weißer
• [U-Boot] Strange CFI flash problem   Matthias Weißer
• [U-Boot] Strange CFI flash problem   Kees Cook
• [U-Boot] Strange CFI flash problem   Matthias Weißer
• [U-Boot] Strange CFI flash problem   Kees Cook
• [U-Boot] Strange CFI flash problem   Kees Cook
• [U-Boot] support for maxim dallas rtcds1347   RAGHAVENDRA GANIGA
• [U-Boot] support for maxim dallas rtcds1347   Tom Rini
• [U-Boot] tpm: Add ST33ZP24 TPM SPI & SPI drivers   Jean-Luc BLANC
• [U-Boot] tpm: Add ST33ZP24 TPM SPI & SPI drivers   Jean-Luc BLANC
• [U-Boot] tps6586x: staticize funtions   Manish Badarkhe
• [U-Boot] U-Boot Loop   Tran, Dang
• [U-Boot] U-Boot Loop   Tran, Dang
• [U-Boot] U-Boot Loop   James Chargin
• [U-Boot] U-Boot Loop   Tran, Dang
• [U-Boot] U-Boot Loop   James Chargin
• [U-Boot] U-Boot Loop   Tran, Dang
• [U-Boot] U-Boot Loop   James Chargin
• [U-Boot] Unable to create BOOT.BIN using zynq-boot-bin.py   Heshsham Abdul Basit
• [U-Boot] Unable to create BOOT.BIN using zynq-boot-bin.py   Michal Simek
• [U-Boot] Updating master with next   Tom Rini
• [U-Boot] usb start crashing on arndale   armdev
• [U-Boot] usbtty using i.MX6   Otavio Salvador
• [U-Boot] usbtty using i.MX6   Eric Bénard
• [U-Boot] usbtty using i.MX6   Eric Nelson
• [U-Boot] usbtty using i.MX6   Michael Trimarchi
• [U-Boot] usbtty using i.MX6   Eric Bénard
• [U-Boot] usbtty using i.MX6   Otavio Salvador
• [U-Boot] usbtty using i.MX6   Eric Bénard
• [U-Boot] usbtty using i.MX6   Eric Nelson
• [U-Boot] why not enable ICache in vexpress_aemv8a.h   York Sun
• [U-Boot] why not enable ICache in vexpress_aemv8a.h   TigerLiu at via-alliance.com
• [U-Boot] Xilinx Zed Board resets with Master   Michal Simek
• [U-Boot] Xilinx Zed Board resets with Master   Tim Sander
• [U-Boot] Xilinx Zed Board resets with Master   Michal Simek
• [U-Boot] {PATCH v3 3/4] arm: exynos: clock: Remove exynos4x12_set_mmc_clk function   Minkyu Kang
• [U-Boot] {PATCH v3 3/4] arm: exynos: clock: Remove exynos4x12_set_mmc_clk function   Beomho Seo