[U-Boot] [PATCH] iomux-v3: Add support for mx6sl LVE bit

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

On mx6sl there is a LVE (Low Voltage Enable) in the IOMUXC_SW_PAD_CTL register.

LVE is bit 22 of IOMUXC_SW_PAD_CTL register, but in order to make the 
calculation easier we can define it as bit 17 as this bit is unused and fits the
current MUX_PAD_CTRL_MASK mask.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/imx-common/iomux-v3.c             | 8 ++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index b59b802..6e46ea8 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -30,6 +30,14 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 		(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
 	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
 
+#if defined CONFIG_MX6SL
+	/* Check whether LVE bit needs to be set */
+	if (pad_ctrl & PAD_CTL_LVE) {
+		pad_ctrl &= ~PAD_CTL_LVE;
+		pad_ctrl |= PAD_CTL_LVE_BIT;
+	}
+#endif
+
 	if (mux_ctrl_ofs)
 		__raw_writel(mux_mode, base + mux_ctrl_ofs);
 
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index dec11a1..6d3561f 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -88,6 +88,8 @@ typedef u64 iomux_v3_cfg_t;
 #ifdef CONFIG_MX6
 
 #define PAD_CTL_HYS		(1 << 16)
+#define PAD_CTL_LVE		(1 << 17)
+#define PAD_CTL_LVE_BIT		(1 << 22)
 
 #define PAD_CTL_PUS_100K_DOWN	(0 << 14 | PAD_CTL_PUE)
 #define PAD_CTL_PUS_47K_UP	(1 << 14 | PAD_CTL_PUE)
-- 
1.8.3.2