[U-Boot] [PATCH 3/8] mx6sabresd: use common board_video_skip

Eric Bénard eric at eukrea.com
Wed Apr 2 21:57:45 CEST 2014


Signed-off-by: Eric Bénard <eric at eukrea.com>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/freescale/mx6sabresd/mx6sabresd.c | 59 ++-------------------------------
 include/configs/mx6sabresd.h            |  1 +
 2 files changed, 4 insertions(+), 56 deletions(-)

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 12d8c56..d54d5db 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -14,14 +14,13 @@
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 DECLARE_GLOBAL_DATA_PTR;
@@ -255,14 +254,6 @@ int board_phy_config(struct phy_device *phydev)
 }
 
 #if defined(CONFIG_VIDEO_IPUV3)
-struct display_info_t {
-	int	bus;
-	int	addr;
-	int	pixfmt;
-	int	(*detect)(struct display_info_t const *dev);
-	void	(*enable)(struct display_info_t const *dev);
-	struct	fb_videomode mode;
-};
 
 static int detect_hdmi(struct display_info_t const *dev)
 {
@@ -299,7 +290,7 @@ static void enable_lvds(struct display_info_t const *dev)
 	writel(reg, &iomux->gpr[2]);
 }
 
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= 0,
 	.pixfmt	= IPU_PIX_FMT_RGB666,
@@ -340,51 +331,7 @@ static struct display_info_t const displays[] = {{
 		.sync           = FB_SYNC_EXT,
 		.vmode          = FB_VMODE_NONINTERLACED
 } } };
-
-int board_video_skip(void)
-{
-	int i;
-	int ret;
-	char const *panel = getenv("panel");
-	if (!panel) {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			struct display_info_t const *dev = displays+i;
-			if (dev->detect && dev->detect(dev)) {
-				panel = dev->mode.name;
-				printf("auto-detected panel %s\n", panel);
-				break;
-			}
-		}
-		if (!panel) {
-			panel = displays[0].mode.name;
-			printf("No panel detected: default to %s\n", panel);
-			i = 0;
-		}
-	} else {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			if (!strcmp(panel, displays[i].mode.name))
-				break;
-		}
-	}
-	if (i < ARRAY_SIZE(displays)) {
-		ret = ipuv3_fb_init(&displays[i].mode, 0,
-				    displays[i].pixfmt);
-		if (!ret) {
-			displays[i].enable(displays+i);
-			printf("Display: %s (%ux%u)\n",
-			       displays[i].mode.name,
-			       displays[i].mode.xres,
-			       displays[i].mode.yres);
-		} else
-			printf("LCD %s cannot be configured: %d\n",
-			       displays[i].mode.name, ret);
-	} else {
-		printf("unsupported panel %s\n", panel);
-		return -EINVAL;
-	}
-
-	return 0;
-}
+size_t display_number = ARRAY_SIZE(displays);
 
 static void setup_display(void)
 {
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 4919f53..72ae024 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -47,5 +47,6 @@
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 #endif                         /* __MX6QSABRESD_CONFIG_H */
-- 
1.9.0



More information about the U-Boot mailing list