[U-Boot] [PATCH v5 7/9] k2hk: add support for k2hk SOC and EVM
Murali Karicheri
m-karicheri2 at ti.com
Tue Apr 1 20:44:27 CEST 2014
From: Vitaly Andrianov <vitalya at ti.com>
k2hk EVM is based on Texas Instruments Keystone2 Hawking/Kepler
SoC. Keystone2 SoC has ARM v7 Cortex-A15 MPCore processor. Please
refer the ti/k2hk_evm/README for details on the board, build and other
information.
This patch add support for keystone architecture and k2hk evm.
Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
Signed-off-by: WingMan Kwok <w-kwok2 at ti.com>
Signed-off-by: Sandeep Nair <sandeep_n at ti.com>
---
Makefile | 10 +
arch/arm/cpu/armv7/keystone/Makefile | 17 ++
arch/arm/cpu/armv7/keystone/aemif.c | 71 +++++
arch/arm/cpu/armv7/keystone/clock.c | 318 ++++++++++++++++++++
arch/arm/cpu/armv7/keystone/cmd_clock.c | 124 ++++++++
arch/arm/cpu/armv7/keystone/cmd_mon.c | 131 ++++++++
arch/arm/cpu/armv7/keystone/ddr3.c | 69 +++++
arch/arm/cpu/armv7/keystone/init.c | 56 ++++
arch/arm/cpu/armv7/keystone/msmc.c | 68 +++++
arch/arm/cpu/armv7/keystone/psc.c | 238 +++++++++++++++
arch/arm/cpu/armv7/keystone/spl.c | 45 +++
arch/arm/include/asm/arch-keystone/clock-k2hk.h | 109 +++++++
arch/arm/include/asm/arch-keystone/clock.h | 17 ++
arch/arm/include/asm/arch-keystone/clock_defs.h | 111 +++++++
arch/arm/include/asm/arch-keystone/emif_defs.h | 73 +++++
arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 150 +++++++++
arch/arm/include/asm/arch-keystone/hardware.h | 175 +++++++++++
arch/arm/include/asm/arch-keystone/i2c_defs.h | 17 ++
arch/arm/include/asm/arch-keystone/nand_defs.h | 23 ++
arch/arm/include/asm/arch-keystone/psc_defs.h | 90 ++++++
arch/arm/include/asm/arch-keystone/spl.h | 12 +
board/ti/k2hk_evm/Makefile | 9 +
board/ti/k2hk_evm/README | 122 ++++++++
board/ti/k2hk_evm/board.c | 236 +++++++++++++++
board/ti/k2hk_evm/ddr3.c | 269 +++++++++++++++++
boards.cfg | 1 +
drivers/serial/ns16550.c | 8 +
include/configs/k2hk_evm.h | 212 +++++++++++++
28 files changed, 2781 insertions(+)
create mode 100644 arch/arm/cpu/armv7/keystone/Makefile
create mode 100644 arch/arm/cpu/armv7/keystone/aemif.c
create mode 100644 arch/arm/cpu/armv7/keystone/clock.c
create mode 100644 arch/arm/cpu/armv7/keystone/cmd_clock.c
create mode 100644 arch/arm/cpu/armv7/keystone/cmd_mon.c
create mode 100644 arch/arm/cpu/armv7/keystone/ddr3.c
create mode 100644 arch/arm/cpu/armv7/keystone/init.c
create mode 100644 arch/arm/cpu/armv7/keystone/msmc.c
create mode 100644 arch/arm/cpu/armv7/keystone/psc.c
create mode 100644 arch/arm/cpu/armv7/keystone/spl.c
create mode 100644 arch/arm/include/asm/arch-keystone/clock-k2hk.h
create mode 100644 arch/arm/include/asm/arch-keystone/clock.h
create mode 100644 arch/arm/include/asm/arch-keystone/clock_defs.h
create mode 100644 arch/arm/include/asm/arch-keystone/emif_defs.h
create mode 100644 arch/arm/include/asm/arch-keystone/hardware-k2hk.h
create mode 100644 arch/arm/include/asm/arch-keystone/hardware.h
create mode 100644 arch/arm/include/asm/arch-keystone/i2c_defs.h
create mode 100644 arch/arm/include/asm/arch-keystone/nand_defs.h
create mode 100644 arch/arm/include/asm/arch-keystone/psc_defs.h
create mode 100644 arch/arm/include/asm/arch-keystone/spl.h
create mode 100644 board/ti/k2hk_evm/Makefile
create mode 100644 board/ti/k2hk_evm/README
create mode 100644 board/ti/k2hk_evm/board.c
create mode 100644 board/ti/k2hk_evm/ddr3.c
create mode 100644 include/configs/k2hk_evm.h
diff --git a/Makefile b/Makefile
index 25cbc95..27b85ed 100644
--- a/Makefile
+++ b/Makefile
@@ -868,6 +868,16 @@ OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
$(call if_changed,pad_cat)
+MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
+spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ --gap-fill=0
+u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
+ $(call if_changed,pad_cat)
+
ifneq ($(CONFIG_TEGRA),)
OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile
new file mode 100644
index 0000000..7924cfa
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/Makefile
@@ -0,0 +1,17 @@
+#
+# (C) Copyright 2012-2014
+# Texas Instruments Incorporated, <www.ti.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += aemif.o
+obj-y += init.o
+obj-y += psc.o
+obj-y += clock.o
+obj-y += cmd_clock.o
+obj-y += cmd_mon.o
+obj-y += msmc.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
+obj-y += ddr3.o
+
diff --git a/arch/arm/cpu/armv7/keystone/aemif.c b/arch/arm/cpu/armv7/keystone/aemif.c
new file mode 100644
index 0000000..9b26886
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/aemif.c
@@ -0,0 +1,71 @@
+/*
+ * Keystone2: Asynchronous EMIF Configuration
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/emif_defs.h>
+
+#define AEMIF_CFG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0)
+#define AEMIF_CFG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0)
+#define AEMIF_CFG_WR_SETUP(v) (((v) & 0x0f) << 26)
+#define AEMIF_CFG_WR_STROBE(v) (((v) & 0x3f) << 20)
+#define AEMIF_CFG_WR_HOLD(v) (((v) & 0x07) << 17)
+#define AEMIF_CFG_RD_SETUP(v) (((v) & 0x0f) << 13)
+#define AEMIF_CFG_RD_STROBE(v) (((v) & 0x3f) << 7)
+#define AEMIF_CFG_RD_HOLD(v) (((v) & 0x07) << 4)
+#define AEMIF_CFG_TURN_AROUND(v) (((v) & 0x03) << 2)
+#define AEMIF_CFG_WIDTH(v) (((v) & 0x03) << 0)
+
+#define set_config_field(reg, field, val) \
+ do { \
+ if (val != -1) { \
+ reg &= ~AEMIF_CFG_##field(0xffffffff); \
+ reg |= AEMIF_CFG_##field(val); \
+ } \
+ } while (0)
+
+void configure_async_emif(int cs, struct async_emif_config *cfg)
+{
+ unsigned long tmp;
+
+ if (cfg->mode == ASYNC_EMIF_MODE_NAND) {
+ tmp = __raw_readl(&davinci_emif_regs->nandfcr);
+ tmp |= (1 << cs);
+ __raw_writel(tmp, &davinci_emif_regs->nandfcr);
+
+ } else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) {
+ tmp = __raw_readl(&davinci_emif_regs->one_nand_cr);
+ tmp |= (1 << cs);
+ __raw_writel(tmp, &davinci_emif_regs->one_nand_cr);
+ }
+
+ tmp = __raw_readl(&davinci_emif_regs->abncr[cs]);
+
+ set_config_field(tmp, SELECT_STROBE, cfg->select_strobe);
+ set_config_field(tmp, EXTEND_WAIT, cfg->extend_wait);
+ set_config_field(tmp, WR_SETUP, cfg->wr_setup);
+ set_config_field(tmp, WR_STROBE, cfg->wr_strobe);
+ set_config_field(tmp, WR_HOLD, cfg->wr_hold);
+ set_config_field(tmp, RD_SETUP, cfg->rd_setup);
+ set_config_field(tmp, RD_STROBE, cfg->rd_strobe);
+ set_config_field(tmp, RD_HOLD, cfg->rd_hold);
+ set_config_field(tmp, TURN_AROUND, cfg->turn_around);
+ set_config_field(tmp, WIDTH, cfg->width);
+
+ __raw_writel(tmp, &davinci_emif_regs->abncr[cs]);
+}
+
+void init_async_emif(int num_cs, struct async_emif_config *config)
+{
+ int cs;
+
+ for (cs = 0; cs < num_cs; cs++)
+ configure_async_emif(cs, config + cs);
+}
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c
new file mode 100644
index 0000000..bfa4c9d
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/clock.c
@@ -0,0 +1,318 @@
+/*
+ * Keystone2: pll initialization
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm-generic/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clock_defs.h>
+
+static void wait_for_completion(const struct pll_init_data *data)
+{
+ int i;
+ for (i = 0; i < 100; i++) {
+ sdelay(450);
+ if ((pllctl_reg_read(data->pll, stat) & PLLSTAT_GO) == 0)
+ break;
+ }
+}
+
+struct pll_regs {
+ u32 reg0, reg1;
+};
+
+static const struct pll_regs pll_regs[] = {
+ [CORE_PLL] = { K2HK_MAINPLLCTL0, K2HK_MAINPLLCTL1},
+ [PASS_PLL] = { K2HK_PASSPLLCTL0, K2HK_PASSPLLCTL1},
+ [TETRIS_PLL] = { K2HK_ARMPLLCTL0, K2HK_ARMPLLCTL1},
+ [DDR3A_PLL] = { K2HK_DDR3APLLCTL0, K2HK_DDR3APLLCTL1},
+ [DDR3B_PLL] = { K2HK_DDR3BPLLCTL0, K2HK_DDR3BPLLCTL1},
+};
+
+/* Fout = Fref * NF(mult) / NR(prediv) / OD */
+static unsigned long pll_freq_get(int pll)
+{
+ unsigned long mult = 1, prediv = 1, output_div = 2;
+ unsigned long ret;
+ u32 tmp, reg;
+
+ if (pll == CORE_PLL) {
+ ret = external_clk[sys_clk];
+ if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) {
+ /* PLL mode */
+ tmp = __raw_readl(K2HK_MAINPLLCTL0);
+ prediv = (tmp & PLL_DIV_MASK) + 1;
+ mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) |
+ (pllctl_reg_read(pll, mult) &
+ PLLM_MULT_LO_MASK)) + 1;
+ output_div = ((pllctl_reg_read(pll, secctl) >>
+ PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1;
+
+ ret = ret / prediv / output_div * mult;
+ }
+ } else {
+ switch (pll) {
+ case PASS_PLL:
+ ret = external_clk[pa_clk];
+ reg = K2HK_PASSPLLCTL0;
+ break;
+ case TETRIS_PLL:
+ ret = external_clk[tetris_clk];
+ reg = K2HK_ARMPLLCTL0;
+ break;
+ case DDR3A_PLL:
+ ret = external_clk[ddr3a_clk];
+ reg = K2HK_DDR3APLLCTL0;
+ break;
+ case DDR3B_PLL:
+ ret = external_clk[ddr3b_clk];
+ reg = K2HK_DDR3BPLLCTL0;
+ break;
+ default:
+ return 0;
+ }
+
+ tmp = __raw_readl(reg);
+
+ if (!(tmp & PLLCTL_BYPASS)) {
+ /* Bypass disabled */
+ prediv = (tmp & PLL_DIV_MASK) + 1;
+ mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1;
+ output_div = ((tmp >> PLL_CLKOD_SHIFT) &
+ PLL_CLKOD_MASK) + 1;
+ ret = ((ret / prediv) * mult) / output_div;
+ }
+ }
+
+ return ret;
+}
+
+unsigned long clk_get_rate(unsigned int clk)
+{
+ switch (clk) {
+ case core_pll_clk: return pll_freq_get(CORE_PLL);
+ case pass_pll_clk: return pll_freq_get(PASS_PLL);
+ case tetris_pll_clk: return pll_freq_get(TETRIS_PLL);
+ case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL);
+ case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL);
+ case sys_clk0_1_clk:
+ case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1);
+ case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2);
+ case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3);
+ case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4);
+ case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2;
+ case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3;
+ case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4;
+ case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6;
+ case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8;
+ case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12;
+ case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24;
+ case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3;
+ case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4;
+ case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6;
+ case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12;
+ default:
+ break;
+ }
+ return 0;
+}
+
+void init_pll(const struct pll_init_data *data)
+{
+ u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj;
+
+ pllm = data->pll_m - 1;
+ plld = (data->pll_d - 1) & PLL_DIV_MASK;
+ pllod = (data->pll_od - 1) & PLL_CLKOD_MASK;
+
+ if (data->pll == MAIN_PLL) {
+ /* The requered delay before main PLL configuration */
+ sdelay(210000);
+
+ tmp = pllctl_reg_read(data->pll, secctl);
+
+ if (tmp & (PLLCTL_BYPASS)) {
+ setbits_le32(pll_regs[data->pll].reg1,
+ BIT(MAIN_ENSAT_OFFSET));
+
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
+ PLLCTL_PLLENSRC);
+ sdelay(340);
+
+ pllctl_reg_setbits(data->pll, secctl, PLLCTL_BYPASS);
+ pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN);
+ sdelay(21000);
+
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN);
+ } else {
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
+ PLLCTL_PLLENSRC);
+ sdelay(340);
+ }
+
+ pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
+
+ clrsetbits_le32(pll_regs[data->pll].reg0, PLLM_MULT_HI_SMASK,
+ (pllm << 6));
+
+ /* Set the BWADJ (12 bit field) */
+ tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */
+ clrsetbits_le32(pll_regs[data->pll].reg0, PLL_BWADJ_LO_SMASK,
+ (tmp_ctl << PLL_BWADJ_LO_SHIFT));
+ clrsetbits_le32(pll_regs[data->pll].reg1, PLL_BWADJ_HI_MASK,
+ (tmp_ctl >> 8));
+
+ /*
+ * Set the pll divider (6 bit field) *
+ * PLLD[5:0] is located in MAINPLLCTL0
+ */
+ clrsetbits_le32(pll_regs[data->pll].reg0, PLL_DIV_MASK, plld);
+
+ /* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */
+ pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK,
+ (pllod << PLL_CLKOD_SHIFT));
+ wait_for_completion(data);
+
+ pllctl_reg_write(data->pll, div1, PLLM_RATIO_DIV1);
+ pllctl_reg_write(data->pll, div2, PLLM_RATIO_DIV2);
+ pllctl_reg_write(data->pll, div3, PLLM_RATIO_DIV3);
+ pllctl_reg_write(data->pll, div4, PLLM_RATIO_DIV4);
+ pllctl_reg_write(data->pll, div5, PLLM_RATIO_DIV5);
+
+ pllctl_reg_setbits(data->pll, alnctl, 0x1f);
+
+ /*
+ * Set GOSET bit in PLLCMD to initiate the GO operation
+ * to change the divide
+ */
+ pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GO);
+ sdelay(1500); /* wait for the phase adj */
+ wait_for_completion(data);
+
+ /* Reset PLL */
+ pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST);
+ sdelay(21000); /* Wait for a minimum of 7 us*/
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST);
+ sdelay(105000); /* Wait for PLL Lock time (min 50 us) */
+
+ pllctl_reg_clrbits(data->pll, secctl, PLLCTL_BYPASS);
+
+ tmp = pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN);
+
+ } else if (data->pll == TETRIS_PLL) {
+ bwadj = pllm >> 1;
+ /* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */
+ setbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+ /*
+ * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass)
+ * only applicable for Kepler
+ */
+ clrbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+ /* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */
+ setbits_le32(pll_regs[data->pll].reg1 ,
+ PLL_PLLRST | PLLCTL_ENSAT);
+
+ /*
+ * 3 Program PLLM and PLLD in PLLCTL0 register
+ * 4 Program BWADJ[7:0] in PLLCTL0 and BWADJ[11:8] in
+ * PLLCTL1 register. BWADJ value must be set
+ * to ((PLLM + 1) >> 1) – 1)
+ */
+ tmp = ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) |
+ (pllm << 6) |
+ (plld & PLL_DIV_MASK) |
+ (pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS;
+ __raw_writel(tmp, pll_regs[data->pll].reg0);
+
+ /* Set BWADJ[11:8] bits */
+ tmp = __raw_readl(pll_regs[data->pll].reg1);
+ tmp &= ~(PLL_BWADJ_HI_MASK);
+ tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK);
+ __raw_writel(tmp, pll_regs[data->pll].reg1);
+ /*
+ * 5 Wait for at least 5 us based on the reference
+ * clock (PLL reset time)
+ */
+ sdelay(21000); /* Wait for a minimum of 7 us*/
+
+ /* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */
+ clrbits_le32(pll_regs[data->pll].reg1, PLL_PLLRST);
+ /*
+ * 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1)
+ * (PLL lock time)
+ */
+ sdelay(105000);
+ /* 8 disable bypass */
+ clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+ /*
+ * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass)
+ * only applicable for Kepler
+ */
+ setbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+ } else {
+ setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT);
+ /*
+ * process keeps state of Bypass bit while programming
+ * all other DDR PLL settings
+ */
+ tmp = __raw_readl(pll_regs[data->pll].reg0);
+ tmp &= PLLCTL_BYPASS; /* clear everything except Bypass */
+
+ /*
+ * Set the BWADJ[7:0], PLLD[5:0] and PLLM to PLLCTL0,
+ * bypass disabled
+ */
+ bwadj = pllm >> 1;
+ tmp |= ((bwadj & PLL_BWADJ_LO_SHIFT) << PLL_BWADJ_LO_SHIFT) |
+ (pllm << PLL_MULT_SHIFT) |
+ (plld & PLL_DIV_MASK) |
+ (pllod << PLL_CLKOD_SHIFT);
+ __raw_writel(tmp, pll_regs[data->pll].reg0);
+
+ /* Set BWADJ[11:8] bits */
+ tmp = __raw_readl(pll_regs[data->pll].reg1);
+ tmp &= ~(PLL_BWADJ_HI_MASK);
+ tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK);
+
+ /* set PLL Select (bit 13) for PASS PLL */
+ if (data->pll == PASS_PLL)
+ tmp |= PLLCTL_PAPLL;
+
+ __raw_writel(tmp, pll_regs[data->pll].reg1);
+
+ /* Reset bit: bit 14 for both DDR3 & PASS PLL */
+ tmp = PLL_PLLRST;
+ /* Set RESET bit = 1 */
+ setbits_le32(pll_regs[data->pll].reg1, tmp);
+ /* Wait for a minimum of 7 us*/
+ sdelay(21000);
+ /* Clear RESET bit */
+ clrbits_le32(pll_regs[data->pll].reg1, tmp);
+ sdelay(105000);
+
+ /* clear BYPASS (Enable PLL Mode) */
+ clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+ sdelay(21000); /* Wait for a minimum of 7 us*/
+ }
+
+ /*
+ * This is required to provide a delay between multiple
+ * consequent PPL configurations
+ */
+ sdelay(210000);
+}
+
+void init_plls(int num_pll, struct pll_init_data *config)
+{
+ int i;
+
+ for (i = 0; i < num_pll; i++)
+ init_pll(&config[i]);
+}
diff --git a/arch/arm/cpu/armv7/keystone/cmd_clock.c b/arch/arm/cpu/armv7/keystone/cmd_clock.c
new file mode 100644
index 0000000..afd30f3
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/cmd_clock.c
@@ -0,0 +1,124 @@
+/*
+ * keystone2: commands for clocks
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/psc_defs.h>
+
+struct pll_init_data cmd_pll_data = {
+ .pll = MAIN_PLL,
+ .pll_m = 16,
+ .pll_d = 1,
+ .pll_od = 2,
+};
+
+int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 5)
+ goto pll_cmd_usage;
+
+ if (strncmp(argv[1], "pa", 2) == 0)
+ cmd_pll_data.pll = PASS_PLL;
+ else if (strncmp(argv[1], "arm", 3) == 0)
+ cmd_pll_data.pll = TETRIS_PLL;
+ else if (strncmp(argv[1], "ddr3a", 5) == 0)
+ cmd_pll_data.pll = DDR3A_PLL;
+ else if (strncmp(argv[1], "ddr3b", 5) == 0)
+ cmd_pll_data.pll = DDR3B_PLL;
+ else
+ goto pll_cmd_usage;
+
+ cmd_pll_data.pll_m = simple_strtoul(argv[2], NULL, 10);
+ cmd_pll_data.pll_d = simple_strtoul(argv[3], NULL, 10);
+ cmd_pll_data.pll_od = simple_strtoul(argv[4], NULL, 10);
+
+ printf("Trying to set pll %d; mult %d; div %d; OD %d\n",
+ cmd_pll_data.pll, cmd_pll_data.pll_m,
+ cmd_pll_data.pll_d, cmd_pll_data.pll_od);
+ init_pll(&cmd_pll_data);
+
+ return 0;
+
+pll_cmd_usage:
+ return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+ pllset, 5, 0, do_pll_cmd,
+ "set pll multiplier and pre divider",
+ "<pa|arm|ddr3a|ddr3b> <mult> <div> <OD>\n"
+);
+
+int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ unsigned int clk;
+ unsigned int freq;
+
+ if (argc != 2)
+ goto getclk_cmd_usage;
+
+ clk = simple_strtoul(argv[1], NULL, 10);
+
+ freq = clk_get_rate(clk);
+ printf("clock index [%d] - frequency %u\n", clk, freq);
+ return 0;
+
+getclk_cmd_usage:
+ return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+ getclk, 2, 0, do_getclk_cmd,
+ "get clock rate",
+ "<clk index>\n"
+ "See the 'enum clk_e' in the k2hk clock.h for clk indexes\n"
+);
+
+int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int psc_module;
+ int res;
+
+ if (argc != 3)
+ goto psc_cmd_usage;
+
+ psc_module = simple_strtoul(argv[1], NULL, 10);
+ if (strcmp(argv[2], "en") == 0) {
+ res = psc_enable_module(psc_module);
+ printf("psc_enable_module(%d) - %s\n", psc_module,
+ (res) ? "ERROR" : "OK");
+ return 0;
+ }
+
+ if (strcmp(argv[2], "di") == 0) {
+ res = psc_disable_module(psc_module);
+ printf("psc_disable_module(%d) - %s\n", psc_module,
+ (res) ? "ERROR" : "OK");
+ return 0;
+ }
+
+ if (strcmp(argv[2], "domain") == 0) {
+ res = psc_disable_domain(psc_module);
+ printf("psc_disable_domain(%d) - %s\n", psc_module,
+ (res) ? "ERROR" : "OK");
+ return 0;
+ }
+
+psc_cmd_usage:
+ return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+ psc, 3, 0, do_psc_cmd,
+ "<enable/disable psc module os disable domain>",
+ "<mod/domain index> <en|di|domain>\n"
+ "See the hardware.h for Power and Sleep Controller (PSC) Domains\n"
+);
diff --git a/arch/arm/cpu/armv7/keystone/cmd_mon.c b/arch/arm/cpu/armv7/keystone/cmd_mon.c
new file mode 100644
index 0000000..f9f58a3
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/cmd_mon.c
@@ -0,0 +1,131 @@
+/*
+ * K2HK: secure kernel command file
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+asm(".arch_extension sec\n\t");
+
+static int mon_install(u32 addr, u32 dpsc, u32 freq)
+{
+ int result;
+
+ __asm__ __volatile__ (
+ "stmfd r13!, {lr}\n"
+ "mov r0, %1\n"
+ "mov r1, %2\n"
+ "mov r2, %3\n"
+ "blx r0\n"
+ "ldmfd r13!, {lr}\n"
+ : "=&r" (result)
+ : "r" (addr), "r" (dpsc), "r" (freq)
+ : "cc", "r0", "r1", "r2", "memory");
+ return result;
+}
+
+static int do_mon_install(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 addr, dpsc_base = 0x1E80000, freq;
+ int rcode = 0;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ freq = clk_get_rate(sys_clk0_6_clk);
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+
+ rcode = mon_install(addr, dpsc_base, freq);
+ printf("## installed monitor, freq [%d], status %d\n",
+ freq, rcode);
+
+ return 0;
+}
+
+U_BOOT_CMD(mon_install, 2, 0, do_mon_install,
+ "Install boot kernel at 'addr'",
+ ""
+);
+
+static void core_spin(void)
+{
+ while (1)
+ ; /* forever */;
+}
+
+int mon_power_on(int core_id, void *ep)
+{
+ int result;
+
+ asm volatile (
+ "stmfd r13!, {lr}\n"
+ "mov r1, %1\n"
+ "mov r2, %2\n"
+ "mov r0, #0\n"
+ "smc #0\n"
+ "ldmfd r13!, {lr}\n"
+ : "=&r" (result)
+ : "r" (core_id), "r" (ep)
+ : "cc", "r0", "r1", "r2", "memory");
+ return result;
+}
+
+int mon_power_off(int core_id)
+{
+ int result;
+
+ asm volatile (
+ "stmfd r13!, {lr}\n"
+ "mov r1, %1\n"
+ "mov r0, #1\n"
+ "smc #1\n"
+ "ldmfd r13!, {lr}\n"
+ : "=&r" (result)
+ : "r" (core_id)
+ : "cc", "r0", "r1", "memory");
+ return result;
+}
+
+int do_mon_power(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int rcode = 0, core_id, on;
+ void (*fn)(void);
+
+ fn = core_spin;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ core_id = simple_strtoul(argv[1], NULL, 16);
+ on = simple_strtoul(argv[2], NULL, 16);
+
+ if (on)
+ rcode = mon_power_on(core_id, fn);
+ else
+ rcode = mon_power_off(core_id);
+
+ if (on) {
+ if (!rcode)
+ printf("core %d powered on successfully\n", core_id);
+ else
+ printf("core %d power on failure\n", core_id);
+ } else {
+ printf("core %d powered off successfully\n", core_id);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(mon_power, 3, 0, do_mon_power,
+ "Power On/Off secondary core",
+ "mon_power <coreid> <oper>\n"
+ "- coreid (1-3) and oper (1 - ON, 0 - OFF)\n"
+ ""
+);
diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c
new file mode 100644
index 0000000..4875db7
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/ddr3.c
@@ -0,0 +1,69 @@
+/*
+ * Keystone2: DDR3 initialization
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
+{
+ unsigned int tmp;
+
+ while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET)
+ & 0x00000001) != 0x00000001)
+ ;
+
+ __raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET);
+
+ tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET);
+ tmp &= ~(phy_cfg->pgcr1_mask);
+ tmp |= phy_cfg->pgcr1_val;
+ __raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET);
+
+ __raw_writel(phy_cfg->ptr0, base + KS2_DDRPHY_PTR0_OFFSET);
+ __raw_writel(phy_cfg->ptr1, base + KS2_DDRPHY_PTR1_OFFSET);
+ __raw_writel(phy_cfg->ptr3, base + KS2_DDRPHY_PTR3_OFFSET);
+ __raw_writel(phy_cfg->ptr4, base + KS2_DDRPHY_PTR4_OFFSET);
+
+ tmp = __raw_readl(base + KS2_DDRPHY_DCR_OFFSET);
+ tmp &= ~(phy_cfg->dcr_mask);
+ tmp |= phy_cfg->dcr_val;
+ __raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET);
+
+ __raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET);
+ __raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET);
+ __raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET);
+ __raw_writel(phy_cfg->mr0, base + KS2_DDRPHY_MR0_OFFSET);
+ __raw_writel(phy_cfg->mr1, base + KS2_DDRPHY_MR1_OFFSET);
+ __raw_writel(phy_cfg->mr2, base + KS2_DDRPHY_MR2_OFFSET);
+ __raw_writel(phy_cfg->dtcr, base + KS2_DDRPHY_DTCR_OFFSET);
+ __raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET);
+
+ __raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET);
+ __raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET);
+ __raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET);
+
+ __raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET);
+ while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
+ ;
+
+ __raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET);
+ while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
+ ;
+}
+
+void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg)
+{
+ __raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET);
+ __raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET);
+ __raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET);
+ __raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET);
+ __raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET);
+ __raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET);
+ __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET);
+}
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
new file mode 100644
index 0000000..044015a
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -0,0 +1,56 @@
+/*
+ * Keystone2: Architecture initialization
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+
+void chip_configuration_unlock(void)
+{
+ __raw_writel(KEYSTONE_KICK0_MAGIC, KEYSTONE_KICK0);
+ __raw_writel(KEYSTONE_KICK1_MAGIC, KEYSTONE_KICK1);
+}
+
+int arch_cpu_init(void)
+{
+ chip_configuration_unlock();
+ icache_enable();
+
+#ifdef CONFIG_SOC_K2HK
+ share_all_segments(8);
+ share_all_segments(9);
+ share_all_segments(10); /* QM PDSP */
+ share_all_segments(11); /* PCIE */
+#endif
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+ volatile u32 *rstctrl = (volatile u32 *)(KS2_RSTCTRL);
+ u32 tmp;
+
+ tmp = *rstctrl & KS2_RSTCTRL_MASK;
+ *rstctrl = tmp | KS2_RSTCTRL_KEY;
+
+ *rstctrl &= KS2_RSTCTRL_SWRST;
+
+ for (;;)
+ ;
+}
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_DCACHE_OFF
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+#endif
+}
diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c
new file mode 100644
index 0000000..f3f1621
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/msmc.c
@@ -0,0 +1,68 @@
+/*
+ * MSMC controller utilities
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+struct mpax {
+ u32 mpaxl;
+ u32 mpaxh;
+};
+
+struct msms_regs {
+ u32 pid;
+ u32 _res_04;
+ u32 smcerrar;
+ u32 smcerrxr;
+ u32 smedcc;
+ u32 smcea;
+ u32 smsecc;
+ u32 smpfar;
+ u32 smpfxr;
+ u32 smpfr;
+ u32 smpfcr;
+ u32 _res_2c;
+ u32 sbndc[8];
+ u32 sbndm;
+ u32 sbnde;
+ u32 _res_58;
+ u32 cfglck;
+ u32 cfgulck;
+ u32 cfglckstat;
+ u32 sms_mpax_lck;
+ u32 sms_mpax_ulck;
+ u32 sms_mpax_lckstat;
+ u32 ses_mpax_lck;
+ u32 ses_mpax_ulck;
+ u32 ses_mpax_lckstat;
+ u32 smestat;
+ u32 smirstat;
+ u32 smirc;
+ u32 smiestat;
+ u32 smiec;
+ u32 _res_94_c0[12];
+ u32 smncerrar;
+ u32 smncerrxr;
+ u32 smncea;
+ u32 _res_d0_1fc[76];
+ struct mpax sms[16][8];
+ struct mpax ses[16][8];
+};
+
+
+void share_all_segments(int priv_id)
+{
+ struct msms_regs *msmc = (struct msms_regs *)K2HK_MSMC_CTRL_BASE;
+ int j;
+
+ for (j = 0; j < 8; j++) {
+ msmc->sms[priv_id][j].mpaxh &= 0xffffff7ful;
+ msmc->ses[priv_id][j].mpaxh &= 0xffffff7ful;
+ }
+}
diff --git a/arch/arm/cpu/armv7/keystone/psc.c b/arch/arm/cpu/armv7/keystone/psc.c
new file mode 100644
index 0000000..fecf918
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/psc.c
@@ -0,0 +1,238 @@
+/*
+ * Keystone: PSC configuration module
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm-generic/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/psc_defs.h>
+
+#define DEVICE_REG32_R(addr) __raw_readl((u32 *)(addr))
+#define DEVICE_REG32_W(addr, val) __raw_writel(val, (u32 *)(addr))
+
+#ifdef CONFIG_SOC_K2HK
+#define DEVICE_PSC_BASE K2HK_PSC_BASE
+#endif
+
+int psc_delay(void)
+{
+ udelay(10);
+ return 10;
+}
+
+/*
+ * FUNCTION PURPOSE: Wait for end of transitional state
+ *
+ * DESCRIPTION: Polls pstat for the selected domain and waits for transitions
+ * to be complete.
+ *
+ * Since this is boot loader code it is *ASSUMED* that interrupts
+ * are disabled and no other core is mucking around with the psc
+ * at the same time.
+ *
+ * Returns 0 when the domain is free. Returns -1 if a timeout
+ * occurred waiting for the completion.
+ */
+int psc_wait(u32 domain_num)
+{
+ u32 retry;
+ u32 ptstat;
+
+ /*
+ * Do nothing if the power domain is in transition. This should never
+ * happen since the boot code is the only software accesses psc.
+ * It's still remotely possible that the hardware state machines
+ * initiate transitions.
+ * Don't trap if the domain (or a module in this domain) is
+ * stuck in transition.
+ */
+ retry = 0;
+
+ do {
+ ptstat = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PSTAT);
+ ptstat = ptstat & (1 << domain_num);
+ } while ((ptstat != 0) && ((retry += psc_delay()) <
+ PSC_PTSTAT_TIMEOUT_LIMIT));
+
+ if (retry >= PSC_PTSTAT_TIMEOUT_LIMIT)
+ return -1;
+
+ return 0;
+}
+
+u32 psc_get_domain_num(u32 mod_num)
+{
+ u32 domain_num;
+
+ /* Get the power domain associated with the module number */
+ domain_num = DEVICE_REG32_R(DEVICE_PSC_BASE +
+ PSC_REG_MDCFG(mod_num));
+ domain_num = PSC_REG_MDCFG_GET_PD(domain_num);
+
+ return domain_num;
+}
+
+/*
+ * FUNCTION PURPOSE: Power up/down a module
+ *
+ * DESCRIPTION: Powers up/down the requested module and the associated power
+ * domain if required. No action is taken it the module is
+ * already powered up/down.
+ *
+ * This only controls modules. The domain in which the module
+ * resides will be left in the power on state. Multiple modules
+ * can exist in a power domain, so powering down the domain based
+ * on a single module is not done.
+ *
+ * Returns 0 on success, -1 if the module can't be powered up, or
+ * if there is a timeout waiting for the transition.
+ */
+int psc_set_state(u32 mod_num, u32 state)
+{
+ u32 domain_num;
+ u32 pdctl;
+ u32 mdctl;
+ u32 ptcmd;
+ u32 reset_iso;
+ u32 v;
+
+ /*
+ * Get the power domain associated with the module number, and reset
+ * isolation functionality
+ */
+ v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num));
+ domain_num = PSC_REG_MDCFG_GET_PD(v);
+ reset_iso = PSC_REG_MDCFG_GET_RESET_ISO(v);
+
+ /* Wait for the status of the domain/module to be non-transitional */
+ if (psc_wait(domain_num) != 0)
+ return -1;
+
+ /*
+ * Perform configuration even if the current status matches the
+ * existing state
+ *
+ * Set the next state of the power domain to on. It's OK if the domain
+ * is always on. This code will not ever power down a domain, so no
+ * change is made if the new state is power down.
+ */
+ if (state == PSC_REG_VAL_MDCTL_NEXT_ON) {
+ pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE +
+ PSC_REG_PDCTL(domain_num));
+ pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl,
+ PSC_REG_VAL_PDCTL_NEXT_ON);
+ DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num),
+ pdctl);
+ }
+
+ /* Set the next state for the module to enabled/disabled */
+ mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+ mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, state);
+ mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, reset_iso);
+ DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl);
+
+ /* Trigger the enable */
+ ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD);
+ ptcmd |= (u32)(1<<domain_num);
+ DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd);
+
+ /* Wait on the complete */
+ return psc_wait(domain_num);
+}
+
+/*
+ * FUNCTION PURPOSE: Power up a module
+ *
+ * DESCRIPTION: Powers up the requested module and the associated power domain
+ * if required. No action is taken it the module is already
+ * powered up.
+ *
+ * Returns 0 on success, -1 if the module can't be powered up, or
+ * if there is a timeout waiting for the transition.
+ */
+int psc_enable_module(u32 mod_num)
+{
+ u32 mdctl;
+
+ /* Set the bit to apply reset */
+ mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+ if ((mdctl & 0x3f) == PSC_REG_VAL_MDSTAT_STATE_ON)
+ return 0;
+
+ return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_ON);
+}
+
+/*
+ * FUNCTION PURPOSE: Power down a module
+ *
+ * DESCRIPTION: Powers down the requested module.
+ *
+ * Returns 0 on success, -1 on failure or timeout.
+ */
+int psc_disable_module(u32 mod_num)
+{
+ u32 mdctl;
+
+ /* Set the bit to apply reset */
+ mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+ if ((mdctl & 0x3f) == 0)
+ return 0;
+ mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0);
+ DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl);
+
+ return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE);
+}
+
+/*
+ * FUNCTION PURPOSE: Set the reset isolation bit in mdctl
+ *
+ * DESCRIPTION: The reset isolation enable bit is set. The state of the module
+ * is not changed. Returns 0 if the module config showed that
+ * reset isolation is supported. Returns 1 otherwise. This is not
+ * an error, but setting the bit in mdctl has no effect.
+ */
+int psc_set_reset_iso(u32 mod_num)
+{
+ u32 v;
+ u32 mdctl;
+
+ /* Set the reset isolation bit */
+ mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num));
+ mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, 1);
+ DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl);
+
+ v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num));
+ if (PSC_REG_MDCFG_GET_RESET_ISO(v) == 1)
+ return 0;
+
+ return 1;
+}
+
+/*
+ * FUNCTION PURPOSE: Disable a power domain
+ *
+ * DESCRIPTION: The power domain is disabled
+ */
+int psc_disable_domain(u32 domain_num)
+{
+ u32 pdctl;
+ u32 ptcmd;
+
+ pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num));
+ pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_OFF);
+ pdctl = PSC_REG_PDCTL_SET_PDMODE(pdctl, PSC_REG_VAL_PDCTL_PDMODE_SLEEP);
+ DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl);
+
+ ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD);
+ ptcmd |= (u32)(1 << domain_num);
+ DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd);
+
+ return psc_wait(domain_num);
+}
+
diff --git a/arch/arm/cpu/armv7/keystone/spl.c b/arch/arm/cpu/armv7/keystone/spl.c
new file mode 100644
index 0000000..e07b64d
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/spl.c
@@ -0,0 +1,45 @@
+/*
+ * common spl init code
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <config.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <spl.h>
+#include <spi_flash.h>
+
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pll_init_data spl_pll_config[] = {
+ CORE_PLL_799,
+ TETRIS_PLL_500,
+};
+
+void spl_init_keystone_plls(void)
+{
+ init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config);
+}
+
+void spl_board_init(void)
+{
+ spl_init_keystone_plls();
+ preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+#if defined(CONFIG_SPL_SPI_LOAD)
+ return BOOT_DEVICE_SPI;
+#else
+ puts("Unknown boot device\n");
+ hang();
+#endif
+}
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
new file mode 100644
index 0000000..6a69a8d
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
@@ -0,0 +1,109 @@
+/*
+ * K2HK: Clock management APIs
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_CLOCK_K2HK_H
+#define __ASM_ARCH_CLOCK_K2HK_H
+
+#include <asm/arch/hardware.h>
+
+#ifndef __ASSEMBLY__
+
+enum ext_clk_e {
+ sys_clk,
+ alt_core_clk,
+ pa_clk,
+ tetris_clk,
+ ddr3a_clk,
+ ddr3b_clk,
+ mcm_clk,
+ pcie_clk,
+ sgmii_srio_clk,
+ xgmii_clk,
+ usb_clk,
+ rp1_clk,
+ ext_clk_count /* number of external clocks */
+};
+
+extern unsigned int external_clk[ext_clk_count];
+
+enum clk_e {
+ core_pll_clk,
+ pass_pll_clk,
+ tetris_pll_clk,
+ ddr3a_pll_clk,
+ ddr3b_pll_clk,
+ sys_clk0_clk,
+ sys_clk0_1_clk,
+ sys_clk0_2_clk,
+ sys_clk0_3_clk,
+ sys_clk0_4_clk,
+ sys_clk0_6_clk,
+ sys_clk0_8_clk,
+ sys_clk0_12_clk,
+ sys_clk0_24_clk,
+ sys_clk1_clk,
+ sys_clk1_3_clk,
+ sys_clk1_4_clk,
+ sys_clk1_6_clk,
+ sys_clk1_12_clk,
+ sys_clk2_clk,
+ sys_clk3_clk
+};
+
+#define K2HK_CLK1_6 sys_clk0_6_clk
+
+/* PLL identifiers */
+enum pll_type_e {
+ CORE_PLL,
+ PASS_PLL,
+ TETRIS_PLL,
+ DDR3A_PLL,
+ DDR3B_PLL,
+};
+#define MAIN_PLL CORE_PLL
+
+/* PLL configuration data */
+struct pll_init_data {
+ int pll;
+ int pll_m; /* PLL Multiplier */
+ int pll_d; /* PLL divider */
+ int pll_od; /* PLL output divider */
+};
+
+#define CORE_PLL_799 {CORE_PLL, 13, 1, 2}
+#define CORE_PLL_983 {CORE_PLL, 16, 1, 2}
+#define CORE_PLL_1167 {CORE_PLL, 19, 1, 2}
+#define CORE_PLL_1228 {CORE_PLL, 20, 1, 2}
+#define PASS_PLL_1228 {PASS_PLL, 20, 1, 2}
+#define PASS_PLL_983 {PASS_PLL, 16, 1, 2}
+#define PASS_PLL_1050 {PASS_PLL, 205, 12, 2}
+#define TETRIS_PLL_500 {TETRIS_PLL, 8, 1, 2}
+#define TETRIS_PLL_750 {TETRIS_PLL, 12, 1, 2}
+#define TETRIS_PLL_687 {TETRIS_PLL, 11, 1, 2}
+#define TETRIS_PLL_625 {TETRIS_PLL, 10, 1, 2}
+#define TETRIS_PLL_812 {TETRIS_PLL, 13, 1, 2}
+#define TETRIS_PLL_875 {TETRIS_PLL, 14, 1, 2}
+#define TETRIS_PLL_1188 {TETRIS_PLL, 19, 2, 1}
+#define TETRIS_PLL_1200 {TETRIS_PLL, 48, 5, 1}
+#define TETRIS_PLL_1375 {TETRIS_PLL, 22, 2, 1}
+#define TETRIS_PLL_1400 {TETRIS_PLL, 56, 5, 1}
+#define DDR3_PLL_200(x) {DDR3##x##_PLL, 4, 1, 2}
+#define DDR3_PLL_400(x) {DDR3##x##_PLL, 16, 1, 4}
+#define DDR3_PLL_800(x) {DDR3##x##_PLL, 16, 1, 2}
+#define DDR3_PLL_333(x) {DDR3##x##_PLL, 20, 1, 6}
+
+void init_plls(int num_pll, struct pll_init_data *config);
+void init_pll(const struct pll_init_data *data);
+unsigned long clk_get_rate(unsigned int clk);
+unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
+int clk_set_rate(unsigned int clk, unsigned long hz);
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h
new file mode 100644
index 0000000..324501b
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/clock.h
@@ -0,0 +1,17 @@
+/*
+ * keystone2: common clock header file
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#ifdef CONFIG_SOC_K2HK
+#include <asm/arch/clock-k2hk.h>
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/include/asm/arch-keystone/clock_defs.h
new file mode 100644
index 0000000..b251aff
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/clock_defs.h
@@ -0,0 +1,111 @@
+/*
+ * keystone2: common pll clock definitions
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CLOCK_DEFS_H_
+#define _CLOCK_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+#define BIT(x) (1 << (x))
+
+/* PLL Control Registers */
+struct pllctl_regs {
+ u32 ctl; /* 00 */
+ u32 ocsel; /* 04 */
+ u32 secctl; /* 08 */
+ u32 resv0;
+ u32 mult; /* 10 */
+ u32 prediv; /* 14 */
+ u32 div1; /* 18 */
+ u32 div2; /* 1c */
+ u32 div3; /* 20 */
+ u32 oscdiv1; /* 24 */
+ u32 resv1; /* 28 */
+ u32 bpdiv; /* 2c */
+ u32 wakeup; /* 30 */
+ u32 resv2;
+ u32 cmd; /* 38 */
+ u32 stat; /* 3c */
+ u32 alnctl; /* 40 */
+ u32 dchange; /* 44 */
+ u32 cken; /* 48 */
+ u32 ckstat; /* 4c */
+ u32 systat; /* 50 */
+ u32 ckctl; /* 54 */
+ u32 resv3[2];
+ u32 div4; /* 60 */
+ u32 div5; /* 64 */
+ u32 div6; /* 68 */
+ u32 div7; /* 6c */
+ u32 div8; /* 70 */
+ u32 div9; /* 74 */
+ u32 div10; /* 78 */
+ u32 div11; /* 7c */
+ u32 div12; /* 80 */
+};
+
+static struct pllctl_regs *pllctl_regs[] = {
+ (struct pllctl_regs *)(CLOCK_BASE + 0x100)
+};
+
+#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg))
+#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg))
+#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg))
+
+#define pllctl_reg_rmw(pll, reg, mask, val) \
+ pllctl_reg_write(pll, reg, \
+ (pllctl_reg_read(pll, reg) & ~(mask)) | val)
+
+#define pllctl_reg_setbits(pll, reg, mask) \
+ pllctl_reg_rmw(pll, reg, 0, mask)
+
+#define pllctl_reg_clrbits(pll, reg, mask) \
+ pllctl_reg_rmw(pll, reg, mask, 0)
+
+#define pll0div_read(N) ((pllctl_reg_read(CORE_PLL, div##N) & 0xff) + 1)
+
+/* PLLCTL Bits */
+#define PLLCTL_BYPASS BIT(23)
+#define PLL_PLLRST BIT(14)
+#define PLLCTL_PAPLL BIT(13)
+#define PLLCTL_CLKMODE BIT(8)
+#define PLLCTL_PLLSELB BIT(7)
+#define PLLCTL_ENSAT BIT(6)
+#define PLLCTL_PLLENSRC BIT(5)
+#define PLLCTL_PLLDIS BIT(4)
+#define PLLCTL_PLLRST BIT(3)
+#define PLLCTL_PLLPWRDN BIT(1)
+#define PLLCTL_PLLEN BIT(0)
+#define PLLSTAT_GO BIT(0)
+
+#define MAIN_ENSAT_OFFSET 6
+
+#define PLLDIV_ENABLE BIT(15)
+
+#define PLL_DIV_MASK 0x3f
+#define PLL_MULT_MASK 0x1fff
+#define PLL_MULT_SHIFT 6
+#define PLLM_MULT_HI_MASK 0x7f
+#define PLLM_MULT_HI_SHIFT 12
+#define PLLM_MULT_HI_SMASK (PLLM_MULT_HI_MASK << PLLM_MULT_HI_SHIFT)
+#define PLLM_MULT_LO_MASK 0x3f
+#define PLL_CLKOD_MASK 0xf
+#define PLL_CLKOD_SHIFT 19
+#define PLL_CLKOD_SMASK (PLL_CLKOD_MASK << PLL_CLKOD_SHIFT)
+#define PLL_BWADJ_LO_MASK 0xff
+#define PLL_BWADJ_LO_SHIFT 24
+#define PLL_BWADJ_LO_SMASK (PLL_BWADJ_LO_MASK << PLL_BWADJ_LO_SHIFT)
+#define PLL_BWADJ_HI_MASK 0xf
+
+#define PLLM_RATIO_DIV1 (PLLDIV_ENABLE | 0)
+#define PLLM_RATIO_DIV2 (PLLDIV_ENABLE | 0)
+#define PLLM_RATIO_DIV3 (PLLDIV_ENABLE | 1)
+#define PLLM_RATIO_DIV4 (PLLDIV_ENABLE | 4)
+#define PLLM_RATIO_DIV5 (PLLDIV_ENABLE | 17)
+
+#endif /* _CLOCK_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-keystone/emif_defs.h b/arch/arm/include/asm/arch-keystone/emif_defs.h
new file mode 100644
index 0000000..a3378aa
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/emif_defs.h
@@ -0,0 +1,73 @@
+/*
+ * emif definitions to re-use davinci emif driver on Keystone2
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ * (C) Copyright 2007 Sergey Kubushyn <ksi at koi8.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _EMIF_DEFS_H_
+#define _EMIF_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+struct davinci_emif_regs {
+ uint32_t ercsr;
+ uint32_t awccr;
+ uint32_t sdbcr;
+ uint32_t sdrcr;
+ uint32_t abncr[4];
+ uint32_t sdtimr;
+ uint32_t ddrsr;
+ uint32_t ddrphycr;
+ uint32_t ddrphysr;
+ uint32_t totar;
+ uint32_t totactr;
+ uint32_t ddrphyid_rev;
+ uint32_t sdsretr;
+ uint32_t eirr;
+ uint32_t eimr;
+ uint32_t eimsr;
+ uint32_t eimcr;
+ uint32_t ioctrlr;
+ uint32_t iostatr;
+ uint32_t rsvd0;
+ uint32_t one_nand_cr;
+ uint32_t nandfcr;
+ uint32_t nandfsr;
+ uint32_t rsvd1[2];
+ uint32_t nandfecc[4];
+ uint32_t rsvd2[15];
+ uint32_t nand4biteccload;
+ uint32_t nand4bitecc[4];
+ uint32_t nanderradd1;
+ uint32_t nanderradd2;
+ uint32_t nanderrval1;
+ uint32_t nanderrval2;
+};
+
+#define davinci_emif_regs \
+ ((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE)
+
+#define DAVINCI_NANDFCR_NAND_ENABLE(n) (1 << ((n) - 2))
+#define DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK (3 << 4)
+#define DAVINCI_NANDFCR_4BIT_ECC_SEL(n) (((n) - 2) << 4)
+#define DAVINCI_NANDFCR_1BIT_ECC_START(n) (1 << (8 + ((n) - 2)))
+#define DAVINCI_NANDFCR_4BIT_ECC_START (1 << 12)
+#define DAVINCI_NANDFCR_4BIT_CALC_START (1 << 13)
+
+/* Chip Select setup */
+#define DAVINCI_ABCR_STROBE_SELECT (1 << 31)
+#define DAVINCI_ABCR_EXT_WAIT (1 << 30)
+#define DAVINCI_ABCR_WSETUP(n) ((n) << 26)
+#define DAVINCI_ABCR_WSTROBE(n) ((n) << 20)
+#define DAVINCI_ABCR_WHOLD(n) ((n) << 17)
+#define DAVINCI_ABCR_RSETUP(n) ((n) << 13)
+#define DAVINCI_ABCR_RSTROBE(n) ((n) << 7)
+#define DAVINCI_ABCR_RHOLD(n) ((n) << 4)
+#define DAVINCI_ABCR_TA(n) ((n) << 2)
+#define DAVINCI_ABCR_ASIZE_16BIT 1
+#define DAVINCI_ABCR_ASIZE_8BIT 0
+
+#endif
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
new file mode 100644
index 0000000..50ff13a
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -0,0 +1,150 @@
+/*
+ * K2HK: SoC definitions
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __ASM_ARCH_HARDWARE_K2HK_H
+#define __ASM_ARCH_HARDWARE_K2HK_H
+
+#define K2HK_ASYNC_EMIF_CNTRL_BASE 0x21000a00
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE K2HK_ASYNC_EMIF_CNTRL_BASE
+#define K2HK_ASYNC_EMIF_DATA_CE0_BASE 0x30000000
+#define K2HK_ASYNC_EMIF_DATA_CE1_BASE 0x34000000
+#define K2HK_ASYNC_EMIF_DATA_CE2_BASE 0x38000000
+#define K2HK_ASYNC_EMIF_DATA_CE3_BASE 0x3c000000
+
+#define K2HK_PLL_CNTRL_BASE 0x02310000
+#define CLOCK_BASE K2HK_PLL_CNTRL_BASE
+#define KS2_RSTCTRL (K2HK_PLL_CNTRL_BASE + 0xe8)
+#define KS2_RSTCTRL_KEY 0x5a69
+#define KS2_RSTCTRL_MASK 0xffff0000
+#define KS2_RSTCTRL_SWRST 0xfffe0000
+
+#define K2HK_PSC_BASE 0x02350000
+#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000
+#define JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18)
+#define K2HK_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20)
+
+#define K2HK_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
+
+#define ARM_PLL_EN BIT(13)
+
+#define K2HK_SPI0_BASE 0x21000400
+#define K2HK_SPI1_BASE 0x21000600
+#define K2HK_SPI2_BASE 0x21000800
+#define K2HK_SPI_BASE K2HK_SPI0_BASE
+
+/* Chip configuration unlock codes and registers */
+#define KEYSTONE_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38)
+#define KEYSTONE_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c)
+#define KEYSTONE_KICK0_MAGIC 0x83e70b13
+#define KEYSTONE_KICK1_MAGIC 0x95a4f1e0
+
+/* PA SS Registers */
+#define KS2_PASS_BASE 0x02000000
+
+/* PLL control registers */
+#define K2HK_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350)
+#define K2HK_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354)
+#define K2HK_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358)
+#define K2HK_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C)
+#define K2HK_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360)
+#define K2HK_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364)
+#define K2HK_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368)
+#define K2HK_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C)
+#define K2HK_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370)
+#define K2HK_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374)
+
+/* Power and Sleep Controller (PSC) Domains */
+#define K2HK_LPSC_MOD 0
+#define K2HK_LPSC_DUMMY1 1
+#define K2HK_LPSC_USB 2
+#define K2HK_LPSC_EMIF25_SPI 3
+#define K2HK_LPSC_TSIP 4
+#define K2HK_LPSC_DEBUGSS_TRC 5
+#define K2HK_LPSC_TETB_TRC 6
+#define K2HK_LPSC_PKTPROC 7
+#define KS2_LPSC_PA K2HK_LPSC_PKTPROC
+#define K2HK_LPSC_SGMII 8
+#define KS2_LPSC_CPGMAC K2HK_LPSC_SGMII
+#define K2HK_LPSC_CRYPTO 9
+#define K2HK_LPSC_PCIE 10
+#define K2HK_LPSC_SRIO 11
+#define K2HK_LPSC_VUSR0 12
+#define K2HK_LPSC_CHIP_SRSS 13
+#define K2HK_LPSC_MSMC 14
+#define K2HK_LPSC_GEM_0 15
+#define K2HK_LPSC_GEM_1 16
+#define K2HK_LPSC_GEM_2 17
+#define K2HK_LPSC_GEM_3 18
+#define K2HK_LPSC_GEM_4 19
+#define K2HK_LPSC_GEM_5 20
+#define K2HK_LPSC_GEM_6 21
+#define K2HK_LPSC_GEM_7 22
+#define K2HK_LPSC_EMIF4F_DDR3A 23
+#define K2HK_LPSC_EMIF4F_DDR3B 24
+#define K2HK_LPSC_TAC 25
+#define K2HK_LPSC_RAC 26
+#define K2HK_LPSC_RAC_1 27
+#define K2HK_LPSC_FFTC_A 28
+#define K2HK_LPSC_FFTC_B 29
+#define K2HK_LPSC_FFTC_C 30
+#define K2HK_LPSC_FFTC_D 31
+#define K2HK_LPSC_FFTC_E 32
+#define K2HK_LPSC_FFTC_F 33
+#define K2HK_LPSC_AI2 34
+#define K2HK_LPSC_TCP3D_0 35
+#define K2HK_LPSC_TCP3D_1 36
+#define K2HK_LPSC_TCP3D_2 37
+#define K2HK_LPSC_TCP3D_3 38
+#define K2HK_LPSC_VCP2X4_A 39
+#define K2HK_LPSC_CP2X4_B 40
+#define K2HK_LPSC_VCP2X4_C 41
+#define K2HK_LPSC_VCP2X4_D 42
+#define K2HK_LPSC_VCP2X4_E 43
+#define K2HK_LPSC_VCP2X4_F 44
+#define K2HK_LPSC_VCP2X4_G 45
+#define K2HK_LPSC_VCP2X4_H 46
+#define K2HK_LPSC_BCP 47
+#define K2HK_LPSC_DXB 48
+#define K2HK_LPSC_VUSR1 49
+#define K2HK_LPSC_XGE 50
+#define K2HK_LPSC_ARM_SREFLEX 51
+#define K2HK_LPSC_TETRIS 52
+
+#define K2HK_UART0_BASE 0x02530c00
+
+/* DDR3A definitions */
+#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000
+#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000
+#define K2HK_DDR3A_DDRPHYC 0x02329000
+/* DDR3B definitions */
+#define K2HK_DDR3B_EMIF_CTRL_BASE 0x21020000
+#define K2HK_DDR3B_EMIF_DATA_BASE 0x60000000
+#define K2HK_DDR3B_DDRPHYC 0x02328000
+
+/* Queue manager */
+#define DEVICE_QM_MANAGER_BASE 0x02a02000
+#define DEVICE_QM_DESC_SETUP_BASE 0x02a03000
+#define DEVICE_QM_MANAGER_QUEUES_BASE 0x02a80000
+#define DEVICE_QM_MANAGER_Q_PROXY_BASE 0x02ac0000
+#define DEVICE_QM_QUEUE_STATUS_BASE 0x02a40000
+#define DEVICE_QM_NUM_LINKRAMS 2
+#define DEVICE_QM_NUM_MEMREGIONS 20
+
+#define DEVICE_PA_CDMA_GLOBAL_CFG_BASE 0x02004000
+#define DEVICE_PA_CDMA_TX_CHAN_CFG_BASE 0x02004400
+#define DEVICE_PA_CDMA_RX_CHAN_CFG_BASE 0x02004800
+#define DEVICE_PA_CDMA_RX_FLOW_CFG_BASE 0x02005000
+
+#define DEVICE_PA_CDMA_RX_NUM_CHANNELS 24
+#define DEVICE_PA_CDMA_RX_NUM_FLOWS 32
+#define DEVICE_PA_CDMA_TX_NUM_CHANNELS 9
+
+/* MSMC control */
+#define K2HK_MSMC_CTRL_BASE 0x0bc00000
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
new file mode 100644
index 0000000..a305a0c
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -0,0 +1,175 @@
+/*
+ * Keystone2: Common SoC definitions, structures etc.
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <config.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sizes.h>
+#include <asm/io.h>
+
+#define REG(addr) (*(volatile unsigned int *)(addr))
+#define REG_P(addr) ((volatile unsigned int *)(addr))
+
+typedef volatile unsigned int dv_reg;
+typedef volatile unsigned int *dv_reg_p;
+
+#define ASYNC_EMIF_NUM_CS 4
+#define ASYNC_EMIF_MODE_NOR 0
+#define ASYNC_EMIF_MODE_NAND 1
+#define ASYNC_EMIF_MODE_ONENAND 2
+#define ASYNC_EMIF_PRESERVE -1
+
+struct async_emif_config {
+ unsigned mode;
+ unsigned select_strobe;
+ unsigned extend_wait;
+ unsigned wr_setup;
+ unsigned wr_strobe;
+ unsigned wr_hold;
+ unsigned rd_setup;
+ unsigned rd_strobe;
+ unsigned rd_hold;
+ unsigned turn_around;
+ enum {
+ ASYNC_EMIF_8 = 0,
+ ASYNC_EMIF_16 = 1,
+ ASYNC_EMIF_32 = 2,
+ } width;
+};
+
+void init_async_emif(int num_cs, struct async_emif_config *config);
+
+struct ddr3_phy_config {
+ unsigned int pllcr;
+ unsigned int pgcr1_mask;
+ unsigned int pgcr1_val;
+ unsigned int ptr0;
+ unsigned int ptr1;
+ unsigned int ptr2;
+ unsigned int ptr3;
+ unsigned int ptr4;
+ unsigned int dcr_mask;
+ unsigned int dcr_val;
+ unsigned int dtpr0;
+ unsigned int dtpr1;
+ unsigned int dtpr2;
+ unsigned int mr0;
+ unsigned int mr1;
+ unsigned int mr2;
+ unsigned int dtcr;
+ unsigned int pgcr2;
+ unsigned int zq0cr1;
+ unsigned int zq1cr1;
+ unsigned int zq2cr1;
+ unsigned int pir_v1;
+ unsigned int pir_v2;
+};
+
+struct ddr3_emif_config {
+ unsigned int sdcfg;
+ unsigned int sdtim1;
+ unsigned int sdtim2;
+ unsigned int sdtim3;
+ unsigned int sdtim4;
+ unsigned int zqcfg;
+ unsigned int sdrfc;
+};
+
+#endif
+
+#define BIT(x) (1 << (x))
+
+#define KS2_DDRPHY_PIR_OFFSET 0x04
+#define KS2_DDRPHY_PGCR0_OFFSET 0x08
+#define KS2_DDRPHY_PGCR1_OFFSET 0x0C
+#define KS2_DDRPHY_PGSR0_OFFSET 0x10
+#define KS2_DDRPHY_PGSR1_OFFSET 0x14
+#define KS2_DDRPHY_PLLCR_OFFSET 0x18
+#define KS2_DDRPHY_PTR0_OFFSET 0x1C
+#define KS2_DDRPHY_PTR1_OFFSET 0x20
+#define KS2_DDRPHY_PTR2_OFFSET 0x24
+#define KS2_DDRPHY_PTR3_OFFSET 0x28
+#define KS2_DDRPHY_PTR4_OFFSET 0x2C
+#define KS2_DDRPHY_DCR_OFFSET 0x44
+
+#define KS2_DDRPHY_DTPR0_OFFSET 0x48
+#define KS2_DDRPHY_DTPR1_OFFSET 0x4C
+#define KS2_DDRPHY_DTPR2_OFFSET 0x50
+
+#define KS2_DDRPHY_MR0_OFFSET 0x54
+#define KS2_DDRPHY_MR1_OFFSET 0x58
+#define KS2_DDRPHY_MR2_OFFSET 0x5C
+#define KS2_DDRPHY_DTCR_OFFSET 0x68
+#define KS2_DDRPHY_PGCR2_OFFSET 0x8C
+
+#define KS2_DDRPHY_ZQ0CR1_OFFSET 0x184
+#define KS2_DDRPHY_ZQ1CR1_OFFSET 0x194
+#define KS2_DDRPHY_ZQ2CR1_OFFSET 0x1A4
+#define KS2_DDRPHY_ZQ3CR1_OFFSET 0x1B4
+
+#define KS2_DDRPHY_DATX8_8_OFFSET 0x3C0
+
+#define IODDRM_MASK 0x00000180
+#define ZCKSEL_MASK 0x01800000
+#define CL_MASK 0x00000072
+#define WR_MASK 0x00000E00
+#define BL_MASK 0x00000003
+#define RRMODE_MASK 0x00040000
+#define UDIMM_MASK 0x20000000
+#define BYTEMASK_MASK 0x0003FC00
+#define MPRDQ_MASK 0x00000080
+#define PDQ_MASK 0x00000070
+#define NOSRA_MASK 0x08000000
+#define ECC_MASK 0x00000001
+
+#define KS2_DDR3_MIDR_OFFSET 0x00
+#define KS2_DDR3_STATUS_OFFSET 0x04
+#define KS2_DDR3_SDCFG_OFFSET 0x08
+#define KS2_DDR3_SDRFC_OFFSET 0x10
+#define KS2_DDR3_SDTIM1_OFFSET 0x18
+#define KS2_DDR3_SDTIM2_OFFSET 0x1C
+#define KS2_DDR3_SDTIM3_OFFSET 0x20
+#define KS2_DDR3_SDTIM4_OFFSET 0x28
+#define KS2_DDR3_PMCTL_OFFSET 0x38
+#define KS2_DDR3_ZQCFG_OFFSET 0xC8
+
+#ifdef CONFIG_SOC_K2HK
+#include <asm/arch/hardware-k2hk.h>
+#endif
+
+#ifndef __ASSEMBLY__
+static inline int cpu_is_k2hk(void)
+{
+ unsigned int jtag_id = __raw_readl(JTAG_ID_REG);
+ unsigned int part_no = (jtag_id >> 12) & 0xffff;
+
+ return (part_no == 0xb981) ? 1 : 0;
+}
+
+static inline int cpu_revision(void)
+{
+ unsigned int jtag_id = __raw_readl(JTAG_ID_REG);
+ unsigned int rev = (jtag_id >> 28) & 0xf;
+
+ return rev;
+}
+
+void share_all_segments(int priv_id);
+int cpu_to_bus(u32 *ptr, u32 length);
+void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg);
+void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg);
+void init_ddr3(void);
+void sdelay(unsigned long);
+
+#endif
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-keystone/i2c_defs.h b/arch/arm/include/asm/arch-keystone/i2c_defs.h
new file mode 100644
index 0000000..d425652
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/i2c_defs.h
@@ -0,0 +1,17 @@
+/*
+ * keystone: i2c driver definitions
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _I2C_DEFS_H_
+#define _I2C_DEFS_H_
+
+#define I2C0_BASE 0x02530000
+#define I2C1_BASE 0x02530400
+#define I2C2_BASE 0x02530800
+#define I2C_BASE I2C0_BASE
+
+#endif
diff --git a/arch/arm/include/asm/arch-keystone/nand_defs.h b/arch/arm/include/asm/arch-keystone/nand_defs.h
new file mode 100644
index 0000000..58417db
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/nand_defs.h
@@ -0,0 +1,23 @@
+/*
+ * nand driver definitions to re-use davinci nand driver on Keystone2
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ * (C) Copyright 2007 Sergey Kubushyn <ksi at koi8.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _NAND_DEFS_H_
+#define _NAND_DEFS_H_
+
+#include <asm/arch/hardware.h>
+#include <linux/mtd/nand.h>
+
+#define MASK_CLE 0x4000
+#define MASK_ALE 0x2000
+
+#define NAND_READ_START 0x00
+#define NAND_READ_END 0x30
+#define NAND_STATUS 0x70
+
+#endif
diff --git a/arch/arm/include/asm/arch-keystone/psc_defs.h b/arch/arm/include/asm/arch-keystone/psc_defs.h
new file mode 100644
index 0000000..70d22cf
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/psc_defs.h
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _PSC_DEFS_H_
+#define _PSC_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+/*
+ * FILE PURPOSE: Local Power Sleep Controller definitions
+ *
+ * FILE NAME: psc_defs.h
+ *
+ * DESCRIPTION: Provides local definitions for the power saver controller
+ *
+ */
+
+/* Register offsets */
+#define PSC_REG_PTCMD 0x120
+#define PSC_REG_PSTAT 0x128
+#define PSC_REG_PDSTAT(x) (0x200 + (4 * (x)))
+#define PSC_REG_PDCTL(x) (0x300 + (4 * (x)))
+#define PSC_REG_MDCFG(x) (0x600 + (4 * (x)))
+#define PSC_REG_MDSTAT(x) (0x800 + (4 * (x)))
+#define PSC_REG_MDCTL(x) (0xa00 + (4 * (x)))
+
+#define BOOTBITMASK(x, y) ((((((u32)1 << (((u32)x) - ((u32)y) + (u32)1)) - \
+ (u32)1)) << ((u32)y)))
+
+#define BOOT_READ_BITFIELD(z, x, y) (((u32)z) & BOOTBITMASK(x, y)) >> (y)
+#define BOOT_SET_BITFIELD(z, f, x, y) (((u32)z) & ~BOOTBITMASK(x, y)) | \
+ ((((u32)f) << (y)) & BOOTBITMASK(x, y))
+
+/* PDCTL */
+#define PSC_REG_PDCTL_SET_NEXT(x, y) BOOT_SET_BITFIELD((x), (y), 0, 0)
+#define PSC_REG_PDCTL_SET_PDMODE(x, y) BOOT_SET_BITFIELD((x), (y), 15, 12)
+
+/* PDSTAT */
+#define PSC_REG_PDSTAT_GET_STATE(x) BOOT_READ_BITFIELD((x), 4, 0)
+
+/* MDCFG */
+#define PSC_REG_MDCFG_GET_PD(x) BOOT_READ_BITFIELD((x), 20, 16)
+#define PSC_REG_MDCFG_GET_RESET_ISO(x) BOOT_READ_BITFIELD((x), 14, 14)
+
+/* MDCTL */
+#define PSC_REG_MDCTL_SET_NEXT(x, y) BOOT_SET_BITFIELD((x), (y), 4, 0)
+#define PSC_REG_MDCTL_SET_LRSTZ(x, y) BOOT_SET_BITFIELD((x), (y), 8, 8)
+#define PSC_REG_MDCTL_GET_LRSTZ(x) BOOT_READ_BITFIELD((x), 8, 8)
+#define PSC_REG_MDCTL_SET_RESET_ISO(x, y) BOOT_SET_BITFIELD((x), (y), \
+ 12, 12)
+
+/* MDSTAT */
+#define PSC_REG_MDSTAT_GET_STATUS(x) BOOT_READ_BITFIELD((x), 5, 0)
+#define PSC_REG_MDSTAT_GET_LRSTZ(x) BOOT_READ_BITFIELD((x), 8, 8)
+#define PSC_REG_MDSTAT_GET_LRSTDONE(x) BOOT_READ_BITFIELD((x), 9, 9)
+
+/* PDCTL states */
+#define PSC_REG_VAL_PDCTL_NEXT_ON 1
+#define PSC_REG_VAL_PDCTL_NEXT_OFF 0
+
+#define PSC_REG_VAL_PDCTL_PDMODE_SLEEP 0
+
+/* MDCTL states */
+#define PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE 0
+#define PSC_REG_VAL_MDCTL_NEXT_OFF 2
+#define PSC_REG_VAL_MDCTL_NEXT_ON 3
+
+/* MDSTAT states */
+#define PSC_REG_VAL_MDSTAT_STATE_ON 3
+#define PSC_REG_VAL_MDSTAT_STATE_ENABLE_IN_PROG 0x24
+#define PSC_REG_VAL_MDSTAT_STATE_OFF 2
+#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG1 0x20
+#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG2 0x21
+#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG3 0x22
+
+/*
+ * Timeout limit on checking PTSTAT. This is the number of times the
+ * wait function will be called before giving up.
+ */
+#define PSC_PTSTAT_TIMEOUT_LIMIT 100
+
+u32 psc_get_domain_num(u32 mod_num);
+int psc_enable_module(u32 mod_num);
+int psc_disable_module(u32 mod_num);
+int psc_disable_domain(u32 domain_num);
+
+#endif /* _PSC_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-keystone/spl.h b/arch/arm/include/asm/arch-keystone/spl.h
new file mode 100644
index 0000000..7012ea7
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/spl.h
@@ -0,0 +1,12 @@
+/*
+ * (C) Copyright 2012-2014
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_SPL_H_
+
+#define BOOT_DEVICE_SPI 2
+
+#endif
diff --git a/board/ti/k2hk_evm/Makefile b/board/ti/k2hk_evm/Makefile
new file mode 100644
index 0000000..3645f2f
--- /dev/null
+++ b/board/ti/k2hk_evm/Makefile
@@ -0,0 +1,9 @@
+#
+# K2HK-EVM: board Makefile
+# (C) Copyright 2012-2014
+# Texas Instruments Incorporated, <www.ti.com>
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += board.o
+obj-y += ddr3.o
diff --git a/board/ti/k2hk_evm/README b/board/ti/k2hk_evm/README
new file mode 100644
index 0000000..bfeb05b
--- /dev/null
+++ b/board/ti/k2hk_evm/README
@@ -0,0 +1,122 @@
+U-Boot port for Texas Instruments XTCIEVMK2X
+============================================
+
+Author: Murali Karicheri <m-karicheri2 at ti.com>
+
+This README has information on the u-boot port for XTCIEVMK2X EVM board.
+Documentation for this board can be found at
+ http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+
+The board is based on Texas Instruments Keystone2 family of SoCs : K2H, K2K.
+More details on these SoCs are available at company websites
+ K2K: http://www.ti.com/product/tci6638k2k
+ K2H: http://www.ti.com/product/tci6638k2h
+
+Board configuration:
+====================
+
+Some of the peripherals that are configured by u-boot are:-
+
+1. 2GB DDR3 (can support 8GB SO DIMM as well)
+2. 512M NAND (over ti emif16 bus)
+3. 6MB MSM SRAM (part of the SoC)
+4. two 1GBit Ethernet ports (SoC supports upto 4)
+5. two UART ports
+6. three i2c interfaces
+7. three spi interfaces (only 1 interface supported in driver)
+
+There are seperate PLLs to drive clocks to Tetris ARM and Peripherals.
+To bring up SMP Linux on this board, there is a boot monitor
+code that will be installed in MSMC SRAM. There is command available
+to install this image from u-boot.
+
+The port related files can be found at following folders
+ keystone2 SoC related files: arch/arm/cpu/armv7/keystone/
+ K2HK evm board files: board/ti/k2hk_evm/
+
+board configuration file: include/configs/k2hk_evm.h
+
+Supported boot modes:
+ - SPI NOR boot
+
+Supported image formats:-
+ - u-boot.bin: for loading and running u-boot.bin through Texas instruments
+ code composure studio (CCS)
+ - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot
+
+Build instructions:
+===================
+
+To build u-boot.bin
+ >make k2hk_evm_config
+ >make u-boot-spi.gph
+
+To build u-boot-spi.gph
+ >make k2hk_evm_config
+ >make u-boot-spi.gph
+
+Load and Run U-Boot on K2HK EVM using CCS
+=========================================
+
+Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin
+on EVM. See instructions at below link for installing CCS on a Windows PC.
+http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started#
+Installing_Code_Composer_Studio
+Use u-boot.bin from the build folder for loading annd running u-boot binary
+on EVM. Follow instructions at
+http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup
+to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode"
+and Power ON the EVM. Follow instructions to connect serial port of EVM to
+PC and start TeraTerm or Hyper Terminal.
+
+Start CCS on a Windows machine and Launch Target
+configuration as instructed at http://processors.wiki.ti.com/index.php/
+MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS.
+The instructions provided in the above link uses a script for
+loading the u-boot binary on the target EVM. Instead do the following:-
+
+1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D
+ isconnected: Unknown)" at the debug window (This is created once Target
+ configuration is launched) and select "Connect Target".
+2. Once target connect is successful, choose Tools->Load Memory option from the
+ top level menu. At the Load Memory window, choose the file u-boot.bin
+ through "Browse" button and click "next >" button. In the next window, enter
+ Start address as 0xc001000, choose Type-size "32 bits" and click "Finish"
+ button.
+3. Click View -> Registers from the top level menu to view registers window.
+4. From Registers, window expand "Core Registers" to view PC. Edit PC value
+ to be 0xc001000. From the "Run" top level menu, select "Free Run"
+5. The U-Boot prompt is shown at the Tera Term/ Hyper terminal console as
+ below and type any key to stop autoboot as instructed :=
+
+U-Boot 2014.04-rc1-00201-gc215b5a (Mar 21 2014 - 12:47:59)
+
+I2C: ready
+Detected SO-DIMM [SQR-SD3T-2G1333SED]
+DRAM: 1.1 GiB
+NAND: 512 MiB
+Net: K2HK_EMAC
+Warning: K2HK_EMAC using MAC address from net device
+, K2HK_EMAC1, K2HK_EMAC2, K2HK_EMAC3
+Hit any key to stop autoboot: 0
+
+SPI NOR Flash programming instructions
+======================================
+U-Boot image can be flashed to first 512KB of the NOR flash using following
+instructions:-
+
+1. Start CCS and run U-boot as described above.
+2. Suspend Target. Select Run -> Suspend from top level menu
+ CortexA15_1 (Free Running)"
+3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000
+ through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM
+ using CCS", but using address 0x87000000.
+4. Free Run the target as desribed earlier (step 4) to get u-boot prompt
+5. At the U-Boot console type following to setup u-boot environment variables.
+ setenv addr_uboot 0x87000000
+ setenv filesize <size in hex of u-boot-spi.gph rounded to hex 0x10000>
+ run burn_uboot
+ Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch
+ to "SPI Little Endian Boot mode" as per instruction at
+ http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup.
+6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash.
diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c
new file mode 100644
index 0000000..aef67f4
--- /dev/null
+++ b/board/ti/k2hk_evm/board.c
@@ -0,0 +1,236 @@
+/*
+ * K2HK EVM : Board initialization
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <exports.h>
+#include <fdt_support.h>
+#include <libfdt.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/arch/nand_defs.h>
+#include <asm/arch/psc_defs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 device_big_endian;
+
+unsigned int external_clk[ext_clk_count] = {
+ [sys_clk] = 122880000,
+ [alt_core_clk] = 125000000,
+ [pa_clk] = 122880000,
+ [tetris_clk] = 125000000,
+ [ddr3a_clk] = 100000000,
+ [ddr3b_clk] = 100000000,
+ [mcm_clk] = 312500000,
+ [pcie_clk] = 100000000,
+ [sgmii_srio_clk] = 156250000,
+ [xgmii_clk] = 156250000,
+ [usb_clk] = 100000000,
+ [rp1_clk] = 123456789 /* TODO: cannot find
+ what is that */
+};
+
+static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = {
+ { /* CS0 */
+ .mode = ASYNC_EMIF_MODE_NAND,
+ .wr_setup = 0xf,
+ .wr_strobe = 0x3f,
+ .wr_hold = 7,
+ .rd_setup = 0xf,
+ .rd_strobe = 0x3f,
+ .rd_hold = 7,
+ .turn_around = 3,
+ .width = ASYNC_EMIF_8,
+ },
+
+};
+
+static struct pll_init_data pll_config[] = {
+ CORE_PLL_1228,
+ PASS_PLL_983,
+ TETRIS_PLL_1200,
+};
+
+int dram_init(void)
+{
+ init_ddr3();
+
+ gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_MAX_RAM_BANK_SIZE);
+ init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config);
+ return 0;
+}
+
+/* Byte swap the 32-bit data if the device is BE */
+int cpu_to_bus(u32 *ptr, u32 length)
+{
+ u32 i;
+
+ if (device_big_endian)
+ for (i = 0; i < length; i++, ptr++)
+ *ptr = __swab32(*ptr);
+
+ return 0;
+}
+
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+int board_early_init_f(void)
+{
+ init_plls(ARRAY_SIZE(pll_config), pll_config);
+ return 0;
+}
+#endif
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+#define K2_DDR3_START_ADDR 0x80000000
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u64 start[2];
+ u64 size[2];
+ char name[32], *env, *endp;
+ int lpae, nodeoffset;
+ u32 ddr3a_size;
+ int nbanks;
+
+ env = getenv("mem_lpae");
+ lpae = env && simple_strtol(env, NULL, 0);
+
+ ddr3a_size = 0;
+ if (lpae) {
+ env = getenv("ddr3a_size");
+ if (env)
+ ddr3a_size = simple_strtol(env, NULL, 10);
+ if ((ddr3a_size != 8) && (ddr3a_size != 4))
+ ddr3a_size = 0;
+ }
+
+ nbanks = 1;
+ start[0] = bd->bi_dram[0].start;
+ size[0] = bd->bi_dram[0].size;
+
+ /* adjust memory start address for LPAE */
+ if (lpae) {
+ start[0] -= K2_DDR3_START_ADDR;
+ start[0] += CONFIG_SYS_LPAE_SDRAM_BASE;
+ }
+
+ if ((size[0] == 0x80000000) && (ddr3a_size != 0)) {
+ size[1] = ((u64)ddr3a_size - 2) << 30;
+ start[1] = 0x880000000;
+ nbanks++;
+ }
+
+ /* reserve memory at start of bank */
+ sprintf(name, "mem_reserve_head");
+ env = getenv(name);
+ if (env) {
+ start[0] += ustrtoul(env, &endp, 0);
+ size[0] -= ustrtoul(env, &endp, 0);
+ }
+
+ sprintf(name, "mem_reserve");
+ env = getenv(name);
+ if (env)
+ size[0] -= ustrtoul(env, &endp, 0);
+
+ fdt_fixup_memory_banks(blob, start, size, nbanks);
+
+ /* Fix up the initrd */
+ if (lpae) {
+ u64 initrd_start, initrd_end;
+ u32 *prop1, *prop2;
+ int err;
+ nodeoffset = fdt_path_offset(blob, "/chosen");
+ if (nodeoffset >= 0) {
+ prop1 = (u32 *)fdt_getprop(blob, nodeoffset,
+ "linux,initrd-start", NULL);
+ prop2 = (u32 *)fdt_getprop(blob, nodeoffset,
+ "linux,initrd-end", NULL);
+ if (prop1 && prop2) {
+ initrd_start = __be32_to_cpu(*prop1);
+ initrd_start -= K2_DDR3_START_ADDR;
+ initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE;
+ initrd_start = __cpu_to_be64(initrd_start);
+ initrd_end = __be32_to_cpu(*prop2);
+ initrd_end -= K2_DDR3_START_ADDR;
+ initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE;
+ initrd_end = __cpu_to_be64(initrd_end);
+
+ err = fdt_delprop(blob, nodeoffset,
+ "linux,initrd-start");
+ if (err < 0)
+ puts("error deleting initrd-start\n");
+
+ err = fdt_delprop(blob, nodeoffset,
+ "linux,initrd-end");
+ if (err < 0)
+ puts("error deleting initrd-end\n");
+
+ err = fdt_setprop(blob, nodeoffset,
+ "linux,initrd-start",
+ &initrd_start,
+ sizeof(initrd_start));
+ if (err < 0)
+ puts("error adding initrd-start\n");
+
+ err = fdt_setprop(blob, nodeoffset,
+ "linux,initrd-end",
+ &initrd_end,
+ sizeof(initrd_end));
+ if (err < 0)
+ puts("error adding linux,initrd-end\n");
+ }
+ }
+ }
+}
+
+void ft_board_setup_ex(void *blob, bd_t *bd)
+{
+ int lpae;
+ char *env;
+ u64 *reserve_start, size;
+
+ env = getenv("mem_lpae");
+ lpae = env && simple_strtol(env, NULL, 0);
+
+ if (lpae) {
+ /*
+ * the initrd and other reserved memory areas are
+ * embedded in in the DTB itslef. fix up these addresses
+ * to 36 bit format
+ */
+ reserve_start = (u64 *)((char *)blob +
+ fdt_off_mem_rsvmap(blob));
+ while (1) {
+ *reserve_start = __cpu_to_be64(*reserve_start);
+ size = __cpu_to_be64(*(reserve_start + 1));
+ if (size) {
+ *reserve_start -= K2_DDR3_START_ADDR;
+ *reserve_start +=
+ CONFIG_SYS_LPAE_SDRAM_BASE;
+ *reserve_start =
+ __cpu_to_be64(*reserve_start);
+ } else {
+ break;
+ }
+ reserve_start += 2;
+ }
+ }
+}
+#endif
diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c
new file mode 100644
index 0000000..b9eff17
--- /dev/null
+++ b/board/ti/k2hk_evm/ddr3.c
@@ -0,0 +1,269 @@
+/*
+ * Keystone2: DDR3 initialization
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+/************************* *****************************/
+static struct ddr3_phy_config ddr3phy_1600_64A = {
+ .pllcr = 0x0001C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0D861A80ul,
+ .ptr4 = 0x0C827100ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
+ .dcr_val = ((1 << 10) | (1 << 27)),
+ .dtpr0 = 0xA19DBB66ul,
+ .dtpr1 = 0x12868300ul,
+ .dtpr2 = 0x50035200ul,
+ .mr0 = 0x00001C70ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000018ul,
+ .dtcr = 0x730035C7ul,
+ .pgcr2 = 0x00F07A12ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1600_64 = {
+ .sdcfg = 0x6200CE6aul,
+ .sdtim1 = 0x16709C55ul,
+ .sdtim2 = 0x00001D4Aul,
+ .sdtim3 = 0x435DFF54ul,
+ .sdtim4 = 0x553F0CFFul,
+ .zqcfg = 0xF0073200ul,
+ .sdrfc = 0x00001869ul,
+};
+
+static struct ddr3_phy_config ddr3phy_1600_32 = {
+ .pllcr = 0x0001C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0D861A80ul,
+ .ptr4 = 0x0C827100ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
+ .dcr_val = ((1 << 10) | (1 << 27)),
+ .dtpr0 = 0xA19DBB66ul,
+ .dtpr1 = 0x12868300ul,
+ .dtpr2 = 0x50035200ul,
+ .mr0 = 0x00001C70ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000018ul,
+ .dtcr = 0x730035C7ul,
+ .pgcr2 = 0x00F07A12ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1600_32 = {
+ .sdcfg = 0x6200DE6aul,
+ .sdtim1 = 0x16709C55ul,
+ .sdtim2 = 0x00001D4Aul,
+ .sdtim3 = 0x435DFF54ul,
+ .sdtim4 = 0x553F0CFFul,
+ .zqcfg = 0x70073200ul,
+ .sdrfc = 0x00001869ul,
+};
+
+/************************* *****************************/
+static struct ddr3_phy_config ddr3phy_1333_64A = {
+ .pllcr = 0x0005C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0B4515C2ul,
+ .ptr4 = 0x0A6E08B4ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
+ NOSRA_MASK | UDIMM_MASK),
+ .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)),
+ .dtpr0 = 0x8558AA55ul,
+ .dtpr1 = 0x12857280ul,
+ .dtpr2 = 0x5002C200ul,
+ .mr0 = 0x00001A60ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000010ul,
+ .dtcr = 0x710035C7ul,
+ .pgcr2 = 0x00F065B8ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1333_64 = {
+ .sdcfg = 0x62008C62ul,
+ .sdtim1 = 0x125C8044ul,
+ .sdtim2 = 0x00001D29ul,
+ .sdtim3 = 0x32CDFF43ul,
+ .sdtim4 = 0x543F0ADFul,
+ .zqcfg = 0xF0073200ul,
+ .sdrfc = 0x00001457ul,
+};
+
+static struct ddr3_phy_config ddr3phy_1333_32 = {
+ .pllcr = 0x0005C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0B4515C2ul,
+ .ptr4 = 0x0A6E08B4ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
+ NOSRA_MASK | UDIMM_MASK),
+ .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)),
+ .dtpr0 = 0x8558AA55ul,
+ .dtpr1 = 0x12857280ul,
+ .dtpr2 = 0x5002C200ul,
+ .mr0 = 0x00001A60ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000010ul,
+ .dtcr = 0x710035C7ul,
+ .pgcr2 = 0x00F065B8ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1333_32 = {
+ .sdcfg = 0x62009C62ul,
+ .sdtim1 = 0x125C8044ul,
+ .sdtim2 = 0x00001D29ul,
+ .sdtim3 = 0x32CDFF43ul,
+ .sdtim4 = 0x543F0ADFul,
+ .zqcfg = 0xf0073200ul,
+ .sdrfc = 0x00001457ul,
+};
+
+/************************* *****************************/
+static struct ddr3_phy_config ddr3phy_1333_64 = {
+ .pllcr = 0x0005C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0B4515C2ul,
+ .ptr4 = 0x0A6E08B4ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
+ .dcr_val = ((1 << 10) | (1 << 27)),
+ .dtpr0 = 0x8558AA55ul,
+ .dtpr1 = 0x12857280ul,
+ .dtpr2 = 0x5002C200ul,
+ .mr0 = 0x00001A60ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000010ul,
+ .dtcr = 0x710035C7ul,
+ .pgcr2 = 0x00F065B8ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+/******************************************************/
+int get_dimm_params(char *dimm_name)
+{
+ u8 spd_params[256];
+ int ret;
+ int old_bus;
+
+ i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
+
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(1);
+
+ ret = i2c_read(0x53, 0, 1, spd_params, 256);
+
+ i2c_set_bus_num(old_bus);
+
+ dimm_name[0] = '\0';
+
+ if (ret) {
+ puts("Cannot read DIMM params\n");
+ return 1;
+ }
+
+ /*
+ * We need to convert spd data to dimm parameters
+ * and to DDR3 EMIF and PHY regirsters values.
+ * For now we just return DIMM type string value.
+ * Caller may use this value to choose appropriate
+ * a pre-set DDR3 configuration
+ */
+
+ strncpy(dimm_name, (char *)&spd_params[0x80], 18);
+ dimm_name[18] = '\0';
+
+ return 0;
+}
+
+struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
+struct pll_init_data ddr3b_333 = DDR3_PLL_333(B);
+struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
+struct pll_init_data ddr3b_400 = DDR3_PLL_400(B);
+
+void init_ddr3(void)
+{
+ char dimm_name[32];
+
+ get_dimm_params(dimm_name);
+
+ printf("Detected SO-DIMM [%s]\n", dimm_name);
+
+ if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) {
+ init_pll(&ddr3a_400);
+ if (cpu_revision() > 0) {
+ init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_64A);
+ init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_64);
+ printf("DRAM: Capacity 8 GiB (includes reported below)\n");
+ } else {
+ init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32);
+ init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_32);
+ printf("DRAM: Capacity 4 GiB (includes reported below)\n");
+ }
+ } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
+ init_pll(&ddr3a_333);
+ if (cpu_revision() > 0) {
+ init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_64A);
+ init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_64);
+ } else {
+ init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32);
+ init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_32);
+ }
+ } else {
+ printf("Unknown SO-DIMM. Cannot configure DDR3\n");
+ while (1)
+ ;
+ }
+
+ init_pll(&ddr3b_333);
+ init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64);
+ init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
+}
+
diff --git a/boards.cfg b/boards.cfg
index 69c8936..2cc51c9 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -294,6 +294,7 @@ Active arm armv7 exynos samsung trats
Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek <p.wilczek at samsung.com>
Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak <p.marczak at samsung.com>
Active arm armv7 highbank - highbank highbank - Rob Herring <rob.herring at calxeda.com>
+Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov <vitalya at ti.com>
Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut <marek.vasut at gmail.com>
Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg -
Active arm armv7 mx5 freescale mx51evk mx51evk mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg Stefano Babic <sbabic at denx.de>
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index fbc37b2..8a13454 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -30,6 +30,11 @@
#define serial_in(y) readb(y)
#endif
+#if defined(CONFIG_K2HK_EVM)
+#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0
+#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
+#endif
+
#ifndef CONFIG_SYS_NS16550_IER
#define CONFIG_SYS_NS16550_IER 0x00
#endif /* CONFIG_SYS_NS16550_IER */
@@ -77,6 +82,9 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
#endif /* CONFIG_OMAP */
+#if defined(CONFIG_K2HK_EVM)
+ serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
+#endif
}
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
new file mode 100644
index 0000000..9d0ba24
--- /dev/null
+++ b/include/configs/k2hk_evm.h
@@ -0,0 +1,212 @@
+/*
+ * Configuration header file for TI's k2hk-evm
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_K2HK_EVM_H
+#define __CONFIG_K2HK_EVM_H
+
+/* Platform type */
+#define CONFIG_SOC_K2HK
+#define CONFIG_K2HK_EVM
+
+/* U-Boot Build Configuration */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
+#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SYS_THUMB_BUILD
+
+/* SoC Configuration */
+#define CONFIG_ARMV7
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_ARCH_TIMER
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x0c001000
+#define CONFIG_SPL_TARGET "u-boot-spi.gph"
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Memory Configuration */
+#define CONFIG_NR_DRAM_BANKS 2
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
+#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
+#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
+#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_TEXT_BASE 0x0c200000
+#define CONFIG_SPL_PAD_TO 65536
+#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
+#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
+ CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024)
+#define CONFIG_SPL_STACK_SIZE (8 * 1024)
+#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
+ CONFIG_SYS_SPL_MALLOC_SIZE + \
+ CONFIG_SPL_STACK_SIZE - 4)
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SPL_FRAMEWORK
+
+/* UART Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* SPI Configuration */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_DAVINCI_SPI
+#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE
+#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI)
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DAVINCI
+#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
+#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
+#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
+#define I2C_BUS_MAX 3
+
+/* EEPROM definitions */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+
+/* NAND Configuration */
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS 2
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+#define CONFIG_SYS_NAND_PAGE_2K
+
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
+ "1024k(bootloader)ro,512k(params)ro," \
+ "-(ubifs)"
+/* U-Boot command configuration */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_EEPROM
+
+/* U-Boot general configuration */
+#define CONFIG_SYS_PROMPT "K2HK EVM # "
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE 2048
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_TIMESTAMP
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "boot=ramfs\0" \
+ "tftp_root=/\0" \
+ "nfs_root=/export\0" \
+ "mem_lpae=1\0" \
+ "mem_reserve=512M\0" \
+ "addr_fdt=0x87000000\0" \
+ "addr_kern=0x88000000\0" \
+ "addr_mon=0x0c5f0000\0" \
+ "addr_uboot=0x87000000\0" \
+ "addr_fs=0x82000000\0" \
+ "addr_ubi=0x82000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "run_mon=mon_install ${addr_mon}\0" \
+ "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
+ "init_ubi=run args_all args_ubi; " \
+ "ubi part ubifs; ubifsmount boot\0" \
+ "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
+ "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
+ "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
+ "burn_uboot=sf probe; sf erase 0 0x100000; " \
+ "sf write ${addr_uboot} 0 ${filesize}\0" \
+ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
+ "burn_ubi=nand erase.part ubifs; " \
+ "nand write ${addr_ubi} ubifs ${filesize}\0" \
+ "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
+ "args_ramfs=setenv bootargs ${bootargs} earlyprintk " \
+ "rdinit=/sbin/init rw root=/dev/ram0 " \
+ "initrd=0x802000000,9M\0" \
+ "mtdparts=mtdparts=davinci_nand.0:" \
+ "1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0"
+#define CONFIG_BOOTCOMMAND \
+ "run init_${boot} get_fdt_${boot} get_mon_${boot} " \
+ "get_kern_${boot} run_mon run_kern"
+#define CONFIG_BOOTARGS \
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_SYS_BARGSIZE 1024
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* we may include files below only after all above definitions */
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6)
+
+#endif /* __CONFIG_K2HK_EVM_H */
--
1.7.9.5
More information about the U-Boot
mailing list