[U-Boot] AP94 u-boot network failure

[donce donce]

I have this u-boot code from vizio router
I can successfully compile this for AP94  target
However in u-boot, network doesn't work at all
Network has static IP by default and ping host in console :
Using eth0 device
ping failed: host 192.168.1.1 is not alive
Check mii dump below, I don't see anything wrong
Please help me
Below link to download source
http://www.mediafire.com/download/m53wqcov9v9pxhk/u-boot-1.1.4.zip

0.     (1000)                 -- PHY control register --
  (8000:0000) 0.15    =     0    reset
  (4000:0000) 0.14    =     0    loopback
  (2040:0000) 0. 6,13 =   b00    speed selection = 10 Mbps
  (1000:1000) 0.12    =     1    A/N enable
  (0800:0000) 0.11    =     0    power-down
  (0400:0000) 0.10    =     0    isolate
  (0200:0000) 0. 9    =     0    restart A/N
  (0100:0000) 0. 8    =     0    duplex = half
  (0080:0000) 0. 7    =     0    collision test enable
  (003f:0000) 0. 5- 0 =     0    (reserved)

1.     (7949)                 -- PHY status register --
  (8000:0000) 1.15    =     0    100BASE-T4 able
  (4000:4000) 1.14    =     1    100BASE-X  full duplex able
  (2000:2000) 1.13    =     1    100BASE-X  half duplex able
  (1000:1000) 1.12    =     1    10 Mbps    full duplex able
  (0800:0800) 1.11    =     1    10 Mbps    half duplex able
  (0400:0000) 1.10    =     0    100BASE-T2 full duplex able
  (0200:0000) 1. 9    =     0    100BASE-T2 half duplex able
  (0100:0100) 1. 8    =     1    extended status
  (0080:0000) 1. 7    =     0    (reserved)
  (0040:0040) 1. 6    =     1    MF preamble suppression
  (0020:0000) 1. 5    =     0    A/N complete
  (0010:0000) 1. 4    =     0    remote fault
  (0008:0008) 1. 3    =     1    A/N able
  (0004:0000) 1. 2    =     0    link status
  (0002:0000) 1. 1    =     0    jabber detect
  (0001:0001) 1. 0    =     1    extended capabilities

2.     (004d)                 -- PHY ID 1 register --
  (ffff:004d) 2.15- 0 =    77    OUI portion

3.     (d043)                 -- PHY ID 2 register --
  (fc00:d000) 3.15-10 =    52    OUI portion
  (03f0:0040) 3. 9- 4 =     4    manufacturer part number
  (000f:0003) 3. 3- 0 =     3    manufacturer rev. number

4.     (01e1)                 -- Autonegotiation advertisement register --
  (8000:0000) 4.15    =     0    next page able
  (4000:0000) 4.14    =     0    reserved
  (2000:0000) 4.13    =     0    remote fault
  (1000:0000) 4.12    =     0    reserved
  (0800:0000) 4.11    =     0    asymmetric pause
  (0400:0000) 4.10    =     0    pause enable
  (0200:0000) 4. 9    =     0    100BASE-T4 able
  (0100:0100) 4. 8    =     1    100BASE-TX full duplex able
  (0080:0080) 4. 7    =     1    100BASE-TX able
  (0040:0040) 4. 6    =     1    10BASE-T   full duplex able
  (0020:0020) 4. 5    =     1    10BASE-T   able
  (001f:0001) 4. 4- 0 =     1    selector = IEEE 802.3

5.     (0000)                 -- Autonegotiation partner abilities register
--
  (8000:0000) 5.15    =     0    next page able
  (4000:0000) 5.14    =     0    acknowledge
  (2000:0000) 5.13    =     0    remote fault
  (1000:0000) 5.12    =     0    (reserved)
  (0800:0000) 5.11    =     0    asymmetric pause able
  (0400:0000) 5.10    =     0    pause able
  (0200:0000) 5. 9    =     0    100BASE-T4 able
  (0100:0000) 5. 8    =     0    100BASE-X full duplex able
  (0080:0000) 5. 7    =     0    100BASE-TX able
  (0040:0000) 5. 6    =     0    10BASE-T full duplex able
  (0020:0000) 5. 5    =     0    10BASE-T able
  (001f:0000) 5. 4- 0 =     0    selector = ???