[U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section

[Prabhakar Kushwaha]

On 4/17/2014 5:37 AM, York Sun wrote:
> On 04/02/2014 09:02 PM, Prabhakar Kushwaha wrote:
>> Hi All,
>>
>> I just want to share my concern with respect to this patch.
>> This patch removed hard-coded value for 0x80000 and use CONFIG_SYS_MONITOR_LEN.
>>
>> There were many Freescale boards config which don’t have correct
>> CONFIG_SYS_MONITOR_LEN(due to size increase from 512KB to 768KB). I fixed them
>> in subsequent patch.
>>
>> This linker file is being used by many other powerpc boards/platforms. Because
>> of hard-coded value of 0x80000 in linker file, there boards are booting till now.
>> but after this patch,  there is a possibility there boards may not boot because
>> of wrong value defined for CONFIG_SYS_MONITOR_LEN by board maintainers.
>>
>> I will request powerpc board maintainers to check config file for correct value
>> of CONFIG_SYS_MONITOR_LEN.
>>
>>
> Prabhakar,
>
> Where are we for this patch? I don't see any comment.
>
>

I did not get any comments :(

Looks like every one is OK with it.

regards,
Prabhakar