[U-Boot] [RFC PATCH 0/2] Add atmel ROM code image

[Andreas Bießmann]

This series add atmelimage support to mkimage.

An atmelimage is a quite dumb image type cause it has no real header. The file
is mostly unmodified but the 6'th ARM vector gets replaced by the image size
to load.

Heiko, I know your approach setting the vector in start.S but I think this
solution is a bit smarter. We would need to patch at least 2 start.S files
(arm926ejs and armv7), maybe also the arm920t one too. In fact is the
conversion of executable BLOB to ROM detected executable BLOB something that
should really be done afterwards as all other SoC vendors do.


Andreas Bießmann (2):
  mkimage: add atmelimage
  arm:at91: enable ROM loadable atmel image

 arch/arm/cpu/armv7/at91/config.mk |   10 +++++
 common/image.c                    |    1 +
 include/image.h                   |    1 +
 spl/Makefile                      |    5 +++
 tools/Makefile                    |    1 +
 tools/atmelimage.c                |   88 +++++++++++++++++++++++++++++++++++++
 tools/imagetool.c                 |    2 +
 tools/imagetool.h                 |    1 +
 8 files changed, 109 insertions(+)
 create mode 100644 arch/arm/cpu/armv7/at91/config.mk
 create mode 100644 tools/atmelimage.c

-- 
1.7.10.4