[U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB

[Prabhakar Kushwaha]

On 4/1/2014 5:14 AM, Rommel G Custodio wrote:
> Rommel G Custodio <sessyargc+u-boot <at> gmail.com> writes:
>
>> Dear Prabhakar Kushwaha,
>>
>> Prabhakar Kushwaha <prabhakar <at> freescale.com> writes:
>>
>>> Add support of 2 stage NAND, SD, SPI boot loader using SPL framework.
>>> here, PBL initialise the internal SRAM and copy SPL(160KB). This further
>>> initialise DDR using SPD and environment and copy u-boot(768 KB) from
> NAND
>> to DDR.
>>> Finally SPL transer control to u-boot.
>> This patch does not apply to HEAD.
> Arrggh ... guess I think I need this
>
> [U-BOOT] [PATCH v3] powerpc/t104xrdb: Unification of	T104xRDB header
> files
>

You may also need below patches in sequence

[U-Boot,U-BOOT,v3] powerpc/t104xrdb: Unification of T104xRDB header files
[U-Boot] powerpc/mpc85xx:Add CONFIG_SYS_FSL_ERRATUM_ESDHC111 to Txx/Bxx
[U-Boot,01/2] powerpc/mpc85xx:Avoid fix address of bootpg section
[U-Boot,2/2] powerpc/mpc85xx:Update MONITOR_LEN
[U-Boot] driver/mmc: fix compile warnings

+ 2 stage boot loader patch set

Please let me know, if any other information is required.

Regards,
Prabhakar