[U-Boot] [PATCH 2/5] usb: ci_udc: set ep->req.actual after transfer

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

At least drivers/usb/gadget/storage_common.c expects that ep->req.actual
contain the number of bytes actually transferred. (At least in practice,
I observed it failing to work correctly unless this was the case).

However, ci_udc.c modifies ep->req.length instead. I assume that .length
 is supposed to represent the allocated buffer size, whereas .actual is
supposed to represent the actual number of bytes transferred. In the OUT
transaction case, this may happen simply because the host sends a smaller
 packet than the max possible size, which is quite legal. In the IN case,
transferring fewer bytes than requested could presumably happen as an
error.

Modify handle_ep_complete() to write to .actual rather than modifying
.length.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 drivers/usb/gadget/ci_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c
index 815ce7b262ca..832606f5e441 100644
--- a/drivers/usb/gadget/ci_udc.c
+++ b/drivers/usb/gadget/ci_udc.c
@@ -321,7 +321,7 @@ static void ci_debounce(struct ci_ep *ep, int in)
 	if (addr == ba)
 		return;		/* not a bounce */
 
-	memcpy(ep->req.buf, ep->b_buf, ep->req.length);
+	memcpy(ep->req.buf, ep->b_buf, ep->req.actual);
 free:
 	/* Large payloads use allocated buffer, free it. */
 	if (ep->b_buf != ep->b_fast)
@@ -388,7 +388,7 @@ static void handle_ep_complete(struct ci_ep *ep)
 		       num, in ? "in" : "out", item->info, item->page0);
 
 	len = (item->info >> 16) & 0x7fff;
-	ep->req.length -= len;
+	ep->req.actual = ep->req.length - len;
 	ci_debounce(ep, in);
 
 	DBG("ept%d %s complete %x\n",
-- 
1.8.1.5