[U-Boot] [PATCH] powerpc/t1040rdb: added a break in switch case

[shh.xie at gmail.com]

From: Shaohui Xie <Shaohui.Xie at freescale.com>

There should be a break for case PHY_INTERFACE_MODE_SGMII, otherwise it
will fall into case PHY_INTERFACE_MODE_RGMII.

Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
---
 board/freescale/t104xrdb/eth.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index 0188fd4..63e5f90 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -41,6 +41,7 @@ int board_eth_init(bd_t *bis)
 			/* T1040RDB only supports SGMII on DTSEC3 */
 			fm_info_set_phy_address(FM1_DTSEC3,
 						CONFIG_SYS_SGMII1_PHY_ADDR);
+			break;
 #endif
 		case PHY_INTERFACE_MODE_RGMII:
 			if (FM1_DTSEC4 == i)
-- 
1.8.0