[U-Boot] How to test vlan in u-boot

[diya]

Hi ,

I am using an 8 port switch (MV88E6131) in our customized board with P2020
Processor. 

Following is the set up in our board, 

Port 6 -> CPU port
Port0 / Port1  / Port2 connected to phy 
Port3 -> No connection
Port 4 / Port 5 connected to DSP's
Port 7 routed to back plane , SGMII connection. 

I tried grouping port0,port1,port2 as one LAN-A  and Port 4,5,7 as LANB.
Such that both LAN A and B cannot communicate with each other , but both can
send frame to CPU PORT.

After this i got stuck and dono how to proceed further and test it. 

Please guide me in this to solve. 
















--
View this message in context: http://u-boot.10912.n7.nabble.com/How-to-test-vlan-in-u-boot-tp178161.html
Sent from the U-Boot mailing list archive at Nabble.com.