[U-Boot] Different Port for TFTP communication
Wolfgang Denk
wd at denx.de
Tue Apr 8 12:06:58 CEST 2014
Dear Mario,
In message <20140407165243.3B074380958 at gemini.denx.de> I wrote:
>
> As is, this cannot be changed. The TFTP port number is hard wired
> in the code - see "net/tftp.c":
>
> ...
> 18 /* Well known TFTP port # */
> 19 #define WELL_KNOWN_PORT 69
> ...
Actually this is not correct. There are options to use different port
numbers, see further down below in the same file:
798 #ifdef CONFIG_TFTP_PORT
799 ep = getenv("tftpdstp");
800 if (ep != NULL)
801 TftpRemotePort = simple_strtol(ep, NULL, 10);
802 ep = getenv("tftpsrcp");
803 if (ep != NULL)
804 TftpOurPort = simple_strtol(ep, NULL, 10);
805 #endif
So just make sure to define CONFIG_TFTP_PORT in your board config
file, and set the environment variables tftpdstp and/or tftpsrcp as
needed.
Hope this helps.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Nail here --X-- for new monitor.
More information about the U-Boot
mailing list