[U-Boot] [PATCH 4/4] cm-t54: add cm-t54 board support

Dmitry Lifshitz lifshitz at compulab.co.il
Sun Apr 27 12:17:28 CEST 2014


Add cm-t54 board directory, config file. Enable build.

Basic support includes:

Serial console
SD/MMC
eMMC
USB
Ethernet

Signed-off-by: Dmitry Lifshitz <lifshitz at compulab.co.il>
Acked-by: Igor Grinberg <grinberg at compulab.co.il>
---
 board/compulab/cm_t54/Makefile |   10 ++
 board/compulab/cm_t54/cm_t54.c |  177 ++++++++++++++++++++++++++++++++++++++++
 board/compulab/cm_t54/mux.c    |   94 +++++++++++++++++++++
 board/compulab/cm_t54/spl.c    |   66 +++++++++++++++
 boards.cfg                     |    1 +
 include/configs/cm_t54.h       |  144 ++++++++++++++++++++++++++++++++
 6 files changed, 492 insertions(+), 0 deletions(-)
 create mode 100644 board/compulab/cm_t54/Makefile
 create mode 100644 board/compulab/cm_t54/cm_t54.c
 create mode 100644 board/compulab/cm_t54/mux.c
 create mode 100644 board/compulab/cm_t54/spl.c
 create mode 100644 include/configs/cm_t54.h

diff --git a/board/compulab/cm_t54/Makefile b/board/compulab/cm_t54/Makefile
new file mode 100644
index 0000000..bd8bc51
--- /dev/null
+++ b/board/compulab/cm_t54/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2014 Compulab Ltd - http://compulab.co.il/
+#
+# Author: Dmitry Lifshitz <lifshitz at compulab.co.il>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += $(BOARD).o
+obj-$(CONFIG_SPL_BUILD) += mux.o spl.o
diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c
new file mode 100644
index 0000000..1a4be72
--- /dev/null
+++ b/board/compulab/cm_t54/cm_t54.c
@@ -0,0 +1,177 @@
+/*
+ * Board functions for Compulab CM-T54 board
+ *
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Dmitry Lifshitz <lifshitz at compulab.co.il>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <mmc.h>
+#include <palmas.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+
+#define DIE_ID_REG_BASE		(OMAP54XX_L4_CORE_BASE + 0x2000)
+#define DIE_ID_REG_OFFSET	0x200
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_SPL_BUILD)
+inline void set_muxconf_regs_essential(void){};
+#endif
+
+const struct omap_sysinfo sysinfo = {
+	"Board: CM-T54\n"
+};
+
+/*
+ * Routine: board_init
+ * Description: hardware init.
+ */
+int board_init(void)
+{
+	gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+	return 0;
+}
+
+/*
+ * Routine: cm_t54_palmas_regulator_set
+ * Description:  select voltage and turn on/off Palmas PMIC regulator.
+ */
+static int cm_t54_palmas_regulator_set(u8 vreg, u8 vval, u8 creg, u8 cval)
+{
+	int err;
+
+	/* Setup voltage */
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, vreg, vval);
+	if (err) {
+		printf("cm_t54: could not set regulator 0x%02x voltage : %d\n",
+		       vreg, err);
+		return err;
+	}
+
+	/* Turn on/off regulator */
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, creg, cval);
+	if (err) {
+		printf("cm_t54: could not turn on/off regulator 0x%02x : %d\n",
+		       creg, err);
+		return err;
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#define SB_T54_CD_GPIO 228
+#define SB_T54_WP_GPIO 229
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	return !gpio_get_value(SB_T54_CD_GPIO);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int ret0, ret1;
+
+	ret0 = omap_mmc_init(0, 0, 0, -1, SB_T54_WP_GPIO);
+	if (ret0)
+		printf("cm_t54: failed to initialize mmc0\n");
+
+	ret1 = omap_mmc_init(1, 0, 0, -1, -1);
+	if (ret1)
+		printf("cm_t54: failed to initialize mmc1\n");
+
+	if (ret0 && ret1)
+		return -1;
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI
+static struct omap_usbhs_board_data usbhs_bdata = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
+	.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
+};
+
+static void setup_host_clocks(bool enable)
+{
+	int usbhost_clk = OPTFCLKEN_HSIC60M_P3_CLK |
+			  OPTFCLKEN_HSIC480M_P3_CLK |
+			  OPTFCLKEN_HSIC60M_P2_CLK |
+			  OPTFCLKEN_HSIC480M_P2_CLK |
+			  OPTFCLKEN_UTMI_P3_CLK |
+			  OPTFCLKEN_UTMI_P2_CLK;
+
+	int usbtll_clk = OPTFCLKEN_USB_CH1_CLK_ENABLE |
+			 OPTFCLKEN_USB_CH2_CLK_ENABLE;
+
+	int usbhub_clk = CKOBUFFER_CLK_ENABLE_MASK;
+
+	if (enable) {
+		/* Enable port 2 and 3 clocks*/
+		setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
+		/* Enable port 2 and 3 usb host ports tll clocks*/
+		setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
+		/* Request FREF_XTAL_CLK clock for HSIC USB Hub */
+		setbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
+	} else {
+		clrbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
+		clrbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
+		clrbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
+	}
+}
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+	int ret;
+
+	/* VCC_3V3_ETH */
+	cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_3V3, SMPS9_CTRL,
+				    SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO);
+
+	setup_host_clocks(true);
+
+	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
+	if (ret < 0)
+		printf("cm_t54: Failed to initialize ehci : %d\n", ret);
+
+	return ret;
+}
+
+int ehci_hcd_stop(void)
+{
+	int ret = omap_ehci_hcd_stop();
+
+	setup_host_clocks(false);
+
+	cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_OFF,
+				    SMPS9_CTRL, SMPS_MODE_SLP_AUTO);
+
+	return ret;
+}
+
+void usb_hub_reset_devices(int port)
+{
+	/* The LAN9730 needs to be reset after the port power has been set. */
+	if (port == 3) {
+		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
+		udelay(10);
+		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
+	}
+}
+#endif
+
diff --git a/board/compulab/cm_t54/mux.c b/board/compulab/cm_t54/mux.c
new file mode 100644
index 0000000..da35383
--- /dev/null
+++ b/board/compulab/cm_t54/mux.c
@@ -0,0 +1,94 @@
+/*
+ * Pinmux configuration for Compulab CM-T54 board
+ *
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Dmitry Lifshitz <lifshitz at compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _CM_T54_MUX_DATA_H
+#define _CM_T54_MUX_DATA_H
+
+#include <asm/arch/mux_omap5.h>
+#include <asm/arch/sys_proto.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+	/* MMC1 - SD CARD */
+	{SDCARD_CLK, (PTU | IEN | M0)},			/* SDCARD_CLK */
+	{SDCARD_CMD, (PTU | IEN | M0)},			/* SDCARD_CMD */
+	{SDCARD_DATA0, (PTU | IEN | M0)},		/* SDCARD_DATA0 */
+	{SDCARD_DATA1, (PTU | IEN | M0)},		/* SDCARD_DATA1 */
+	{SDCARD_DATA2, (PTU | IEN | M0)},		/* SDCARD_DATA2 */
+	{SDCARD_DATA3, (PTU | IEN | M0)},		/* SDCARD_DATA3 */
+
+	/* SD CARD CD and WP GPIOs*/
+	{TIMER5_PWM_EVT, (PTU | IEN | M6)},		/* GPIO8_228 */
+	{TIMER6_PWM_EVT, (PTU | IEN | M6)},		/* GPIO8_229 */
+
+	/* MMC2 - eMMC */
+	{EMMC_CLK, (PTU | IEN | M0)},			/* EMMC_CLK */
+	{EMMC_CMD, (PTU | IEN | M0)},			/* EMMC_CMD */
+	{EMMC_DATA0, (PTU | IEN | M0)},			/* EMMC_DATA0 */
+	{EMMC_DATA1, (PTU | IEN | M0)},			/* EMMC_DATA1 */
+	{EMMC_DATA2, (PTU | IEN | M0)},			/* EMMC_DATA2 */
+	{EMMC_DATA3, (PTU | IEN | M0)},			/* EMMC_DATA3 */
+	{EMMC_DATA4, (PTU | IEN | M0)},			/* EMMC_DATA4 */
+	{EMMC_DATA5, (PTU | IEN | M0)},			/* EMMC_DATA5 */
+	{EMMC_DATA6, (PTU | IEN | M0)},			/* EMMC_DATA6 */
+	{EMMC_DATA7, (PTU | IEN | M0)},			/* EMMC_DATA7 */
+
+	/* UART4 */
+	{I2C5_SCL, (PTU | IEN | M2)},			/* UART4_RX */
+	{I2C5_SDA, (M2)},				/* UART4_TX */
+
+	/* Led */
+	{HSI2_CAFLAG, (PTU | M6)},			/* GPIO3_80 */
+
+	/* I2C1 */
+	{I2C1_PMIC_SCL, (PTU | IEN | M0)},		/* I2C1_PMIC_SCL */
+	{I2C1_PMIC_SDA, (PTU | IEN | M0)},		/* I2C1_PMIC_SDA */
+
+	/* USBB2, USBB3 */
+	{USBB2_HSIC_STROBE, (PTU | IEN | M0)},		/* USBB2_HSIC_STROBE */
+	{USBB2_HSIC_DATA, (PTU | IEN | M0)},		/* USBB2_HSIC_DATA */
+	{USBB3_HSIC_STROBE, (PTU | IEN | M0)},		/* USBB3_HSIC_STROBE */
+	{USBB3_HSIC_DATA, (PTU | IEN | M0)},		/* USBB3_HSIC_DATA */
+
+	/* USB Hub and USB Eth reset GPIOs */
+	{HSI2_CAREADY, (PTD | M6)},			/* GPIO3_76 */
+	{HSI2_ACDATA, (PTD | M6)},			/* GPIO3_83 */
+
+	/* I2C4 */
+	{I2C4_SCL, (PTU | IEN | M0)},			/* I2C4_SCL  */
+	{I2C4_SDA, (PTU | IEN | M0)},			/* I2C4_SDA  */
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+	{SR_PMIC_SCL, (PTU | IEN | M0)},		/* SR_PMIC_SCL */
+	{SR_PMIC_SDA, (PTU | IEN | M0)},		/* SR_PMIC_SDA */
+	{SYS_32K, (IEN | M0)},				/* SYS_32K */
+
+	/* USB Hub clock */
+	{FREF_CLK1_OUT, (PTD | IEN | M0)},		/* FREF_CLK1_OUT  */
+};
+
+/*
+ * Routine: set_muxconf_regs_essential
+ * Description: setup board pinmux configuration.
+ */
+void set_muxconf_regs_essential(void)
+{
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
+		   sizeof(core_padconf_array_essential) /
+		   sizeof(struct pad_conf_entry));
+
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
+		   sizeof(wkup_padconf_array_essential) /
+		   sizeof(struct pad_conf_entry));
+}
+
+#endif /* _CM_T54_MUX_DATA_H */
diff --git a/board/compulab/cm_t54/spl.c b/board/compulab/cm_t54/spl.c
new file mode 100644
index 0000000..5c7b2c8
--- /dev/null
+++ b/board/compulab/cm_t54/spl.c
@@ -0,0 +1,66 @@
+/*
+ * SPL specific code for Compulab CM-T54 board
+ *
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Dmitry Lifshitz <lifshitz at compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/emif.h>
+
+const struct emif_regs emif_regs_ddr3_532_mhz_cm_t54 = {
+#if defined(CONFIG_DRAM_1G) || defined(CONFIG_DRAM_512M)
+	.sdram_config_init              = 0x618522B2,
+	.sdram_config                   = 0x618522B2,
+#elif defined(CONFIG_DRAM_2G)
+	.sdram_config_init              = 0x618522BA,
+	.sdram_config                   = 0x618522BA,
+#endif
+	.sdram_config2			= 0x0,
+	.ref_ctrl                       = 0x00001040,
+	.sdram_tim1                     = 0xEEEF36F3,
+	.sdram_tim2                     = 0x348F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x1007190B,
+	.temp_alert_config              = 0x00000000,
+
+	.emif_ddr_phy_ctlr_1_init       = 0x0030400B,
+	.emif_ddr_phy_ctlr_1            = 0x0034400B,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_4        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_5        = 0x4350D435,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x40000305,
+};
+
+const struct dmm_lisa_map_regs lisa_map_cm_t54 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x0,
+
+#ifdef CONFIG_DRAM_2G
+	.dmm_lisa_map_2 = 0x80740300,
+#elif defined(CONFIG_DRAM_1G)
+	.dmm_lisa_map_2 = 0x80640300,
+#elif defined(CONFIG_DRAM_512M)
+	.dmm_lisa_map_2 = 0x80500100,
+#endif
+	.dmm_lisa_map_3 = 0x00000000,
+	.is_ma_present	= 0x1,
+};
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+	*regs = &emif_regs_ddr3_532_mhz_cm_t54;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+{
+	*dmm_lisa_regs = &lisa_map_cm_t54;
+}
diff --git a/boards.cfg b/boards.cfg
index b4203f1..0f3a0bd 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -359,6 +359,7 @@ Active  arm         armv7          omap3       ti              sdp3430
 Active  arm         armv7          omap3       timll           devkit8000          devkit8000                           -                                                                                                                                 Thomas Weber <weber at corscience.de>
 Active  arm         armv7          omap4       ti              panda               omap4_panda                          -                                                                                                                                 Sricharan R <r.sricharan at ti.com>
 Active  arm         armv7          omap4       ti              sdp4430             omap4_sdp4430                        -                                                                                                                                 Sricharan R <r.sricharan at ti.com>
+Active  arm         armv7          omap5       compulab        cm_t54              cm_t54                               -                                                                                                                                 Dmitry Lifshitz <lifshitz at compulab.co.il>
 Active  arm         armv7          omap5       ti              dra7xx              dra7xx_evm                           dra7xx_evm:CONS_INDEX=1                                                                                                           Lokesh Vutla <lokeshvutla at ti.com>
 Active  arm         armv7          omap5       ti              dra7xx              dra7xx_evm_uart3                     dra7xx_evm:CONS_INDEX=3,SPL_YMODEM_SUPPORT                                                                                        Lokesh Vutla <lokeshvutla at ti.com>
 Active  arm         armv7          omap5       ti              omap5_uevm          omap5_uevm                           -                                                                                                                                 -
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
new file mode 100644
index 0000000..3ca229b
--- /dev/null
+++ b/include/configs/cm_t54.h
@@ -0,0 +1,144 @@
+/*
+ * Config file for Compulab CM-T54 board
+ *
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Dmitry Lifshitz <lifshitz at compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_CM_T54_H
+#define __CONFIG_CM_T54_H
+
+#define CONFIG_CM_T54
+#define CONFIG_DRAM_2G
+
+#include <configs/ti_omap5_common.h>
+
+#undef CONFIG_MISC_INIT_R
+#undef CONFIG_SPL_OS_BOOT
+
+/* Enable SD/MMC CD and WP GPIOs */
+#define OMAP_HSMMC_USE_GPIO
+
+/* UART setup */
+#define CONFIG_CONS_INDEX		4
+#define CONFIG_SYS_NS16550_COM4		UART4_BASE
+#define CONFIG_BAUDRATE			115200
+
+/* SD/MMC RAW boot */
+#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
+#undef CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x200 /* 0x40000 - 256 KB */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300 /* 384 KB */
+
+/* MMC ENV related defines */
+#undef CONFIG_ENV_OFFSET
+#undef CONFIG_ENV_SIZE
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		1		/* SLOT2: eMMC(1) */
+#define CONFIG_ENV_OFFSET		0xc0000		/* (in bytes) 768 KB */
+#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_CMD_SAVEENV
+
+/* Enhance our eMMC support / experience. */
+#define CONFIG_HSMMC2_8BIT
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO	76 /* HSIC2 HUB #RESET */
+#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO	83 /* HSIC3 ETH #RESET */
+
+/* Enabled commands */
+#define CONFIG_CMD_DHCP		/* DHCP Support			*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_PING
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_RNDIS
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
+
+/* Max time to hold reset on this board, see doc/README.omap-reset-time */
+#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef CONFIG_SYS_AUTOLOAD
+#undef CONFIG_SYS_PROMPT
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CONFIG_BOOTCOMMAND
+
+#define CONFIG_SYS_AUTOLOAD		"no"
+#define CONFIG_SYS_PROMPT		"CM-T54 # "
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"fdtaddr=0x80F80000\0" \
+	"fdt_high=0xffffffff\0" \
+	"rdaddr=0x81000000\0" \
+	"console=ttyO3,115200n8\0" \
+	"fdtfile=omap5-sbc-t54.dtb\0" \
+	"bootenv=uEnv.txt\0" \
+	"bootpart=0:1\0" \
+	"bootfile=zImage-cm-t54\0" \
+	"vram=16M\0" \
+	"optargs=fixrtc\0" \
+	"mmcdev=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rw rootwait\0" \
+	"mmcrootfstype=ext4\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"vram=${vram} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootfile}\0" \
+	"mmcboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"if run loadbootenv; then " \
+				"echo Loaded environment from ${bootenv};" \
+				"run importbootenv;" \
+			"fi;" \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...;" \
+				"run uenvcmd;" \
+			"fi;" \
+			"if run loadimage; then " \
+				"run loadfdt; " \
+				"echo Booting from mmc${mmcdev} ...; " \
+				"run mmcargs; " \
+				"bootz ${loadaddr} - ${fdtaddr}; " \
+			"fi;" \
+		"fi;\0" \
+	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${fdtfile};\0"
+
+#define CONFIG_BOOTCOMMAND \
+	"echo Trying SD/MMC boot ...;" \
+	"run mmcboot;" \
+	"echo Trying eMMC boot ...;" \
+	"setenv mmcdev 1; " \
+	"setenv bootpart 1:1; " \
+	"setenv mmcroot /dev/mmcblk0p2 rw rootwait; " \
+	"run mmcboot;"
+
+#endif /* __CONFIG_CM_T54_H */
-- 
1.7.5.4



More information about the U-Boot mailing list