[U-Boot] [PATCH 10/18] ARM: zynq: Fix building SPL without FPGA support

[Michal Simek]

When CONFIG_FPGA is defined but CONFIG_SPL_FPGA is not, the build fails:
board.c: In function 'board_init':
board.c:41:3: error: 'fpga' undeclared (first use in this function)
   fpga = fpga010;

Fix this by expanding the "#if.." around this block to match the other
FPGA checks and don't compile this block when buildign for SPL without
FPGA support.

Tested a bootloader that had CONFIG_FPGA defined without CONFIG_SPL_FPGA,
this now compiles without errors and loading FPGA from u-boot works.

Signed-off-by: Mike Looijmans <mike.looijmans at topic.nl>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 board/xilinx/zynq/board.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 5190938..258632e 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -15,7 +15,8 @@

 DECLARE_GLOBAL_DATA_PTR;

-#ifdef CONFIG_FPGA
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+    (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
 static xilinx_desc fpga;

 /* It can be done differently */
@@ -29,7 +30,8 @@ static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);

 int board_init(void)
 {
-#ifdef CONFIG_FPGA
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+    (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
 	u32 idcode;

 	idcode = zynq_slcr_get_idcode();
@@ -56,7 +58,8 @@ int board_init(void)
 	}
 #endif

-#ifdef CONFIG_FPGA
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+    (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
 	fpga_init();
 	fpga_add(fpga_xilinx, &fpga);
 #endif
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140425/f51fee04/attachment.pgp>