[U-Boot] [PATCH 1/2] net: zynq: Use predefined macros instead of hardcoded value

[Michal Simek]

MII is used by this driver.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/net/zynq_gem.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 101489c..08056a4 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -338,7 +338,8 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 	phy_detection(dev);

 	/* interface - look at tsec */
-	phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0);
+	phydev = phy_connect(priv->bus, priv->phyaddr, dev,
+			     PHY_INTERFACE_MODE_MII);

 	phydev->supported = supported | ADVERTISED_Pause |
 			    ADVERTISED_Asym_Pause;
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140425/d6663c45/attachment.pgp>