[U-Boot] [PATCHv3 00/13] mmc: exynos: code cleanup and support DDR mode
Jaehoon Chung
jh80.chung at samsung.com
Fri Apr 11 07:55:14 CEST 2014
If card and host are supported DDR mode, then it can be used the DDR mode.
This patch-set has dependency about beomho's patch-set.
(Based-on u-boot-samsung repository)
It's result for loading image.
sdhci controller ->5260488 bytes read in 259 ms (19.4 MiB/s)
dwmmc controller without DDR mode -> 5260488 bytes read in 202 ms (24.8 MiB/s)
dwmmc controller with DDR mode -> 5260488 bytes read in 118 ms (42.5 MiB/s)
Download the 400M image with lthor.
sdhci controller -> 59.4sec (Avg 6.95 MB/s)
dwmmc controller without DDR mode -> 61.6sec (Avg 6.72MB/s)
dwmmc controller with DDR mode -> 60.4sec (Avg 6.85MB/s)
Beomho Seo (3):
arm: exynos: pinmux: add sdmmc4 gpio configratuion
arm: exynos: clock: Remove exynos4x12_set_mmc_clk function
board: trats2: Enable device tree on Trats2
Jaehoon Chung (10):
ARM: exynos: board: change the mmc/sd init sequence
ARM: exynos: clock: modify the set_mmc_clk for exynos4
mmc: exynos_dw_mmc: restore the property into host
mmc: remove the unnecessary define and fix the wrong bit control
mmc: support the DDR mode for eMMC
mmc: dw_mmc: support the DDR mode
ARM: dts: exnyos: enable dw-mmc controller
mmc: exynos_dw_mmc: enable the DDR mode
ARM: exynos4: enable the dwmmc configuration
mmc: s5p_sdhci: add the s5p_sdhci_core_init function
arch/arm/cpu/armv7/exynos/clock.c | 45 ++-----
arch/arm/cpu/armv7/exynos/pinmux.c | 18 ++-
arch/arm/dts/exynos4.dtsi | 8 ++
arch/arm/dts/exynos4412-trats2.dts | 12 ++
arch/arm/include/asm/arch-exynos/clk.h | 5 +
board/samsung/common/board.c | 13 +-
drivers/mmc/dw_mmc.c | 12 +-
drivers/mmc/exynos_dw_mmc.c | 209 ++++++++++++++++++++------------
drivers/mmc/mmc.c | 16 ++-
drivers/mmc/s5p_sdhci.c | 42 +++----
include/configs/exynos4-dt.h | 3 +
include/dwmmc.h | 5 +
include/mmc.h | 25 ++--
13 files changed, 250 insertions(+), 163 deletions(-)
--
1.7.9.5
More information about the U-Boot
mailing list