[U-Boot] iMX6 PCie inbound traffic not working
"David Müller (ELSOFT AG)"
d.mueller at elsoft.ch
Thu Apr 24 16:58:34 CEST 2014
Hello
I tried to use a Intel 82574 based miniPCIe NIC on a Freescale iMX6 eval
board as shown below. It seems that the NIC is unable to read and/or
write the descriptors in system memory. The settings of the PCIe core
registers seems to be OK (according to the iMX6 RM).
Any idea what i am missing?
U-Boot 2014.04-00078-gadcdeac-dirty (Apr 24 2014 - 15:40:02)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: WDOG
Board: MX6-SabreSD
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
*** Warning - bad CRC, using default environment
00:01.0 - 16c3:abcd - Bridge device
01:00.0 - 8086:10d3 - Network controller
No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In: serial
Out: serial
Err: serial
Net: e1000: 00:03:1d:0c:57:86
e1000#0
Warning: e1000#0 using MAC address from net device
Dave
More information about the U-Boot
mailing list