[U-Boot] [PATCH v4 4/5] samsung: misc: keys: fix gpio key bouncing by adding 50 ms delay

[Gerhard Sittig]

On Fri, 2014-04-25 at 12:20 +0200, Przemyslaw Marczak wrote:
> 
> This change prevents gpio keys bouncing by adding 50 ms delay
> when key pressed condition met.
> 
> [ ... ]
> @@ -105,6 +105,10 @@ static int check_keys(void)
>  	if (key_pressed(KEY_VOLUMEDOWN))
>  		keys += KEY_VOLUMEDOWN;
>  
> +	/* Avoids gpio keys debouncing */
> +	if (keys)
> +		mdelay(50);
> +
>  	return keys;
>  }

The approach might have helped in your case, since you tested it
and found it's good.  I'm just wondering whether the code really
does correct de-bouncing.

The delay does decrease the polling frequency (assuming that the
routine is called in a loop).  But you return data that was
sampled before the delay.  You don't re-fetch samples after the
delay.  And this would not necessarily help either, I'm afraid.

In case the GPIO (or the key_pressed() call) does debouncing, you
wouldn't need it here.  If the key_pressed() result still is
bouncy, then the above logic would not debounce it.  What you
need is some kind of "trigger" where you notice that the line
levels are changing, and a delayed fetch of the lines' values
after they have settled.  Without the first condition, you always
have the risk of sampling arbitrary data that does not reflect
the keys' status.

nit: The comment still appears to be misleading, you don't want
to avoid debouncing. :)


virtually yours
Gerhard Sittig
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de