[U-Boot] [PATCH v2 3/6] ARM: tegra: i2c: add nvec driver
Andrey Danin
danindrey at mail.ru
Sun Apr 27 03:14:27 CEST 2014
Signed-off-by: Andrey Danin <danindrey at mail.ru>
CC: Stephen Warren <swarren at nvidia.com>
CC: Marc Dietrich <marvin24 at gmx.de>
CC: Julian Andres Klode <jak at jak-linux.org>
CC: ac100 at lists.launchpad.net
---
Changes for v2:
- NVEC driver was reworked to use tegra-i2c
arch/arm/include/asm/arch-tegra/tegra_nvec.h | 130 ++++++++++++
board/nvidia/common/board.c | 12 ++
drivers/i2c/Makefile | 1 +
drivers/i2c/tegra_nvec.c | 294 ++++++++++++++++++++++++++
include/fdtdec.h | 1 +
lib/fdtdec.c | 1 +
6 files changed, 439 insertions(+)
create mode 100644 arch/arm/include/asm/arch-tegra/tegra_nvec.h
create mode 100644 drivers/i2c/tegra_nvec.c
diff --git a/arch/arm/include/asm/arch-tegra/tegra_nvec.h b/arch/arm/include/asm/arch-tegra/tegra_nvec.h
new file mode 100644
index 0000000..f1cec0d
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra/tegra_nvec.h
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2014
+ * Andrey Danin <danindrey at mail.ru>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _TEGRA_NVEC_H_
+#define _TEGRA_NVEC_H_
+
+#define I2C_CNFG 0x00
+#define I2C_CNFG_PACKET_MODE_EN (1<<10)
+#define I2C_CNFG_NEW_MASTER_SFM (1<<11)
+#define I2C_CNFG_DEBOUNCE_CNT_SHIFT 12
+
+#define I2C_SL_CNFG 0x20
+#define I2C_SL_NEWSL (1<<2)
+#define I2C_SL_NACK (1<<1)
+#define I2C_SL_RESP (1<<0)
+#define I2C_SL_IRQ (1<<3)
+#define END_TRANS (1<<4)
+#define RCVD (1<<2)
+#define RNW (1<<1)
+
+#define I2C_SL_RCVD 0x24
+#define I2C_SL_STATUS 0x28
+#define I2C_SL_ADDR1 0x2c
+#define I2C_SL_ADDR2 0x30
+#define I2C_SL_DELAY_COUNT 0x3c
+
+
+enum nvec_msg_type {
+ NVEC_KEYBOARD = 0,
+ NVEC_SYS = 1,
+ NVEC_BAT,
+ NVEC_GPIO,
+ NVEC_SLEEP,
+ NVEC_KBD,
+ NVEC_PS2,
+ NVEC_CNTL,
+ NVEC_OEM0 = 0x0d,
+ NVEC_KB_EVT = 0x80,
+ NVEC_PS2_EVT,
+ NVEC_LAST_MSG,
+};
+
+enum nvec_event_size {
+ NVEC_2BYTES,
+ NVEC_3BYTES,
+ NVEC_VAR_SIZE,
+};
+
+enum sys_subcmds {
+ SYS_GET_STATUS,
+ SYS_CNFG_EVENT_REPORTING,
+ SYS_ACK_STATUS,
+ SYS_CNFG_WAKE = 0xfd,
+};
+
+enum kbd_subcmds {
+ CNFG_WAKE = 3,
+ CNFG_WAKE_KEY_REPORTING,
+ SET_LEDS = 0xed,
+ ENABLE_KBD = 0xf4,
+ DISABLE_KBD,
+};
+
+enum cntl_subcmds {
+ CNTL_RESET_EC = 0x00,
+ CNTL_SELF_TEST = 0x01,
+ CNTL_NOOP = 0x02,
+ CNTL_GET_EC_SPEC_VER = 0x10,
+ CNTL_GET_FIRMWARE_VERSION = 0x15,
+};
+
+enum nvec_sleep_subcmds {
+ GLOBAL_EVENTS,
+ AP_PWR_DOWN,
+ AP_SUSPEND,
+};
+
+enum ps2_subcmds {
+ MOUSE_SEND_CMD = 0x01
+};
+
+#define MOUSE_RESET 0xff
+
+typedef int (*periph_start)(void);
+typedef int (*periph_process_msg)(const unsigned char *);
+
+struct nvec_periph {
+ periph_start start;
+ periph_process_msg process_msg;
+};
+
+
+int board_nvec_init(void);
+
+/**
+ * Read all available events.
+ *
+ * @return count of available events if ok, -1 on error
+ */
+int nvec_read_events(void);
+
+int nvec_msg_is_event(const unsigned char *msg);
+int nvec_msg_event_type(const unsigned char *msg);
+
+/**
+ * Register perepherial device driver.
+ *
+ * @param msg_type type of messages that divece processes.
+ * @param periph pointer to device description.
+ *
+ * @return 0 if ok, -1 on error
+ */
+int nvec_register_periph(int msg_type, struct nvec_periph *periph);
+
+/**
+ * Send request and read response. If write or read failed
+ * operation will be repeated NVEC_ATTEMPTS_MAX times.
+ *
+ * @param buf request data
+ * @param size request data size
+ * @return 0 if ok, -1 on error
+ */
+int nvec_do_request(char *buf, int size);
+
+
+#endif /* _TEGRA_NVEC_H_ */
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 3b18e28..6d3055c 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -38,6 +38,9 @@
#include <asm/arch-tegra/tegra_mmc.h>
#include <asm/arch-tegra/mmc.h>
#endif
+#ifdef CONFIG_SYS_I2C_TEGRA_NVEC
+#include <asm/arch-tegra/tegra_nvec.h>
+#endif
#include <i2c.h>
#include <spi.h>
#include "emc.h"
@@ -194,10 +197,19 @@ int board_early_init_f(void)
int board_late_init(void)
{
+ __maybe_unused int err;
+
#ifdef CONFIG_LCD
/* Make sure we finish initing the LCD */
tegra_lcd_check_next_stage(gd->fdt_blob, 1);
#endif
+
+#ifdef CONFIG_SYS_I2C_TEGRA_NVEC
+ err = board_nvec_init();
+ if (err)
+ debug("NVEC controller init failed: %d\n", err);
+#endif
+
return 0;
}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index fa3a875..3041191 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -27,4 +27,5 @@ obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
+obj-$(CONFIG_SYS_I2C_TEGRA_NVEC) += tegra_nvec.o
obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o
diff --git a/drivers/i2c/tegra_nvec.c b/drivers/i2c/tegra_nvec.c
new file mode 100644
index 0000000..b568988
--- /dev/null
+++ b/drivers/i2c/tegra_nvec.c
@@ -0,0 +1,294 @@
+/*
+ * (C) Copyright 2014
+ * Andrey Danin <danindrey at mail.ru>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch-tegra/tegra_nvec.h>
+
+#ifndef CONFIG_SYS_I2C_TEGRA_NVEC
+#error "You should enable CONFIG_SYS_I2C_TEGRA_NVEC"
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct nvec_periph devices[NVEC_LAST_MSG];
+
+
+struct nvec_t {
+ int i2c_bus;
+ struct fdt_gpio_state gpio;
+} nvec_data;
+
+
+/* nvec commands */
+char noop[] = { NVEC_CNTL, CNTL_NOOP };
+
+void nvec_signal_request(void)
+{
+ gpio_set_value(nvec_data.gpio.gpio, 0);
+}
+
+
+void nvec_clear_request(void)
+{
+ gpio_set_value(nvec_data.gpio.gpio, 1);
+}
+
+
+int nvec_msg_is_event(const unsigned char *msg)
+{
+ return msg[0] >> 7;
+}
+
+
+int nvec_msg_event_type(const unsigned char *msg)
+{
+ return msg[0] & 0x0f;
+}
+
+
+/**
+ * Process incoming io message.
+ * If message is keyboard event then key code will
+ * be added to keys buffer.
+ *
+ * @param nvec nvec state struct
+ */
+void nvec_process_msg(struct nvec_t *nvec, struct i2c_transaction *trans)
+{
+ (void) nvec;
+
+ const unsigned char *msg = (const unsigned char *)&trans->rx_buf[1];
+ int event_type;
+
+ if (!nvec_msg_is_event(msg))
+ return;
+
+ event_type = nvec_msg_event_type(msg);
+
+ if (event_type < NVEC_KEYBOARD || event_type >= NVEC_LAST_MSG)
+ return;
+
+ if (devices[event_type].process_msg)
+ devices[event_type].process_msg(msg);
+}
+
+
+/**
+ * Perform complete io operation (read or write).
+ * NOTE: function will wait NVEC_TIMEOUT_MIN (20ms)
+ * before status check to avoid nvec hang.
+ *
+ * @param nvec nvec state struct
+ * @param wait_for_ec if 1(NVEC_WAIT_FOR_EC) operation
+ * timeout is NVEC_TIMEOUT_MAX (600ms),
+ * otherwise function will return if io
+ * is not ready.
+ *
+ * @return nvec_io_* code
+ */
+int nvec_do_io(struct nvec_t *nvec)
+{
+ static unsigned int prev_timer;
+ unsigned int poll_start_ms = get_timer(prev_timer);
+ struct i2c_transaction trans;
+ int res;
+
+ if (poll_start_ms > 30000) {
+ if (prev_timer != 0)
+ nvec_do_request(noop, sizeof(noop));
+ prev_timer = get_timer(0);
+ }
+
+ memset(&trans, 0, sizeof(trans));
+ trans.start_timeout = 1;
+ trans.timeout = 6000;
+
+ res = i2c_slave_io(&trans);
+ if (res == 0) {
+ nvec_process_msg(nvec, &trans);
+ return 0;
+ }
+
+ if (res != -1)
+ debug("Error: i2c slave io failed with code %d\n", res);
+
+ return -1;
+}
+
+/**
+ * Send request and read response. If write or read failed
+ * operation will be repeated NVEC_ATTEMPTS_MAX times.
+ *
+ * @param buf request data
+ * @param size request data size
+ * @return 0 if ok, -1 on error
+ */
+int nvec_do_request(char *buf, int size)
+{
+ int res;
+ struct i2c_transaction trans;
+ int i;
+
+ nvec_signal_request();
+
+ /* Request */
+ for (i = 0; i < 10; ++i) {
+ memset(&trans, 0, sizeof(trans));
+ trans.start_timeout = 600;
+ trans.timeout = 6000;
+
+ trans.tx_buf[0] = (char)size;
+ memcpy(&trans.tx_buf[1], buf, size);
+ trans.tx_size = size + 1;
+
+ res = i2c_slave_io(&trans);
+ if (res == 0) {
+ if (trans.tx_pos == trans.tx_size)
+ break;
+
+ debug("Request was not sent completely");
+ } else if (res != -1) {
+ debug("Unknown error while slave io");
+ }
+ }
+ nvec_clear_request();
+ if (res != 0) {
+ error("nvec failed to perform request\n");
+ return -1;
+ }
+
+ /* Response */
+ for (i = 0; i < 10; ++i) {
+ memset(&trans, 0, sizeof(trans));
+ trans.start_timeout = 600;
+ trans.timeout = 6000;
+
+ res = i2c_slave_io(&trans);
+ if (res == 0)
+ break;
+ }
+ if (res != 0) {
+ error("nvec failed to read response\n");
+ return -1;
+ }
+
+ /* TODO Parse response */
+
+ return 0;
+}
+
+
+/**
+ * Decode the nvec information from the fdt.
+ *
+ * @param blob fdt blob
+ * @param nvec nvec device sturct
+ * @return 0 if ok, -ve on error
+ */
+static int nvec_decode_config(const void *blob,
+ struct nvec_t *nvec)
+{
+ int node, parent;
+ int i2c_bus;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_NVEC);
+ if (node < 0) {
+ error("Cannot find NVEC node in fdt\n");
+ return node;
+ }
+
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -1;
+ }
+
+ i2c_bus = i2c_get_bus_num_fdt(parent);
+ if (i2c_bus < 0)
+ return -1;
+ nvec->i2c_bus = i2c_bus;
+
+ if (fdtdec_decode_gpio(blob, node, "request-gpios",
+ &nvec->gpio)) {
+ error("No NVEC request gpio\n");
+ return -1;
+ }
+
+ debug("NVEC: i2c:%d, gpio:%s(%u)\n",
+ nvec->i2c_bus, nvec->gpio.name, nvec->gpio.gpio);
+ return 0;
+}
+
+
+int board_nvec_init(void)
+{
+ int res = 0;
+ int i;
+
+ if (nvec_decode_config(gd->fdt_blob, &nvec_data)) {
+ error("Can't parse NVEC node in device tree\n");
+ return -1;
+ }
+
+ debug("NVEC initialization...\n");
+
+ res = gpio_request(nvec_data.gpio.gpio, NULL);
+ if (res != 0)
+ error("NVEC: err, gpio_request\n");
+ res = gpio_direction_output(nvec_data.gpio.gpio, 1);
+ if (res != 0)
+ error("NVEC: err, gpio_direction\n");
+ res = gpio_set_value(nvec_data.gpio.gpio, 1);
+ if (res != 0)
+ error("NVEC: err, gpio_set_value\n");
+ udelay(100);
+
+ i2c_set_bus_num(nvec_data.i2c_bus);
+
+ for (i = NVEC_KEYBOARD; i < NVEC_LAST_MSG; ++i)
+ if (devices[i].start) {
+ debug("Starting device %d(0x%x)\n", i, i);
+ devices[i].start();
+ }
+
+ return 1;
+}
+
+
+int nvec_read_events(void)
+{
+ int res;
+ int cnt = 0;
+
+ while (++cnt <= 8) {
+ res = nvec_do_io(&nvec_data);
+ if (res)
+ break;
+
+ /* TODO Process nvec communication errors */
+ }
+
+ return cnt;
+}
+
+
+int nvec_register_periph(int msg_type, struct nvec_periph *periph)
+{
+ if (devices[msg_type].start || devices[msg_type].process_msg) {
+ error("Device for msg %d already registered\n", msg_type);
+ return -1;
+ }
+
+ devices[msg_type] = *periph;
+ return 0;
+}
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 19bab79..7b84335 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -64,6 +64,7 @@ enum fdt_compat_id {
COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */
COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */
COMPAT_NVIDIA_TEGRA20_SLINK, /* Tegra 2 SPI SLINK controller */
+ COMPAT_NVIDIA_TEGRA20_NVEC, /* Tegra 2 EC controller */
COMPAT_NVIDIA_TEGRA114_SPI, /* Tegra 114 SPI controller */
COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */
COMPAT_SAMSUNG_EXYNOS5_SROMC, /* Exynos5 SROMC */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 1fecab3..82df701 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -37,6 +37,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"),
COMPAT(NVIDIA_TEGRA20_SFLASH, "nvidia,tegra20-sflash"),
COMPAT(NVIDIA_TEGRA20_SLINK, "nvidia,tegra20-slink"),
+ COMPAT(NVIDIA_TEGRA20_NVEC, "nvidia,tegra20-nvec"),
COMPAT(NVIDIA_TEGRA114_SPI, "nvidia,tegra114-spi"),
COMPAT(SMSC_LAN9215, "smsc,lan9215"),
COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"),
--
1.7.9.5
More information about the U-Boot
mailing list