[U-Boot] [PATCH v3 5/5] arm: move exception handling out of start.S files
Albert ARIBAUD
albert.u.boot at aribaud.net
Tue Apr 15 16:13:51 CEST 2014
Exception handling is basically identical for all ARM targets.
Factorize it out of the various start.S files and into a
single vectors.S file, and adjust linker scripts accordingly.
Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
Changes in v3:
- factorized SPL/non-SPL code
- fixed socfpga_cyclone5 IRQ setting in save_boot_params
Changes in v2:
- rebased onto u-boot-arm/master (de4fdfc1)
- adjusted comment in Zynq linker script
arch/arm/cpu/arm1136/start.S | 242 +----------------------
arch/arm/cpu/arm1176/start.S | 196 +------------------
arch/arm/cpu/arm720t/start.S | 229 +---------------------
arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 3 +-
arch/arm/cpu/arm920t/start.S | 216 +--------------------
arch/arm/cpu/arm926ejs/mxs/start.S | 92 +--------
arch/arm/cpu/arm926ejs/spear/start.S | 27 +--
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 1 +
arch/arm/cpu/arm926ejs/start.S | 262 +------------------------
arch/arm/cpu/arm946es/start.S | 221 +--------------------
arch/arm/cpu/arm_intcm/start.S | 228 +---------------------
arch/arm/cpu/armv7/socfpga/lowlevel_init.S | 15 +-
arch/arm/cpu/armv7/start.S | 250 +-----------------------
arch/arm/cpu/armv7/zynq/u-boot.lds | 2 +-
arch/arm/cpu/pxa/start.S | 245 +----------------------
arch/arm/cpu/sa1100/start.S | 215 +-------------------
arch/arm/cpu/u-boot-spl.lds | 1 +
arch/arm/cpu/u-boot.lds | 1 +
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/vectors.S | 291 ++++++++++++++++++++++++++++
board/compulab/cm_t335/u-boot.lds | 1 +
board/freescale/mx31ads/u-boot.lds | 1 +
board/ti/am335x/u-boot.lds | 1 +
23 files changed, 316 insertions(+), 2426 deletions(-)
create mode 100644 arch/arm/lib/vectors.S
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 13567b9..1cfcca9 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -15,46 +15,7 @@
#include <asm-offsets.h>
#include <config.h>
#include <version.h>
-.globl _start
-_start: b reset
-#ifdef CONFIG_SPL_BUILD
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-_hang:
- .word do_hang
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678 /* now 16*4=64 */
-#else
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-
- .balignl 16,0xdeadbeef
/*
*************************************************************************
*
@@ -68,26 +29,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -150,185 +92,3 @@ cpu_init_crit:
mov lr, ip /* restore link */
mov pc, lr /* back to my caller */
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack
- ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode)
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_bad_stack_swi
- sub r13, r13, #4 @ space on current stack for scratch reg.
- str r0, [r13] @ save R0's value.
- ldr r0, IRQ_STACK_START_IN @ get data regions start
- str lr, [r0] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r0, #4] @ save spsr in position 1 of saved stack
- ldr lr, [r0] @ restore lr
- ldr r0, [r13] @ restore r0
- add r13, r13, #4 @ pop stack entry
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-#endif /* CONFIG_SPL_BUILD */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_SPL_BUILD
- .align 5
-do_hang:
- bl hang /* hang and never return */
-#else /* !CONFIG_SPL_BUILD */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index b353d69..0704bdd 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -25,46 +25,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-.globl _start
-_start: b reset
-#ifndef CONFIG_SPL_BUILD
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-_pad:
- .word 0x12345678 /* now 16*4=64 */
-#else
- . = _start + 64
-#endif
-
- .balignl 16,0xdeadbeef
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -75,14 +35,7 @@ _pad:
*************************************************************************
*/
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -180,150 +133,3 @@ skip_tcmdisable:
c_runtime_cpu_setup:
mov pc, lr
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- */
-
- .macro bad_save_user_regs
- /* carve out a frame on current user stack */
- sub sp, sp, #S_FRAME_SIZE
- /* Save user registers (now in svc mode) r0-r12 */
- stmia sp, {r0 - r12}
-
- ldr r2, IRQ_STACK_START_IN
- /* get values for "aborted" pc and cpsr (into parm regs) */
- ldmia r2, {r2 - r3}
- /* grab pointer to old stack */
- add r0, sp, #S_FRAME_SIZE
-
- add r5, sp, #S_SP
- mov r1, lr
- /* save sp_SVC, lr_SVC, pc, cpsr */
- stmia r5, {r0 - r3}
- /* save current stack into r0 (param register) */
- mov r0, sp
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- /* save caller lr in position 0 of saved stack */
- str lr, [r13]
- /* get the spsr */
- mrs lr, spsr
- /* save spsr in position 1 of saved stack */
- str lr, [r13, #4]
-
- /* prepare SVC-Mode */
- mov r13, #MODE_SVC
- @ msr spsr_c, r13
- /* switch modes, make sure moves will execute */
- msr spsr, r13
- /* capture return pc */
- mov lr, pc
- /* jump to next instruction & switch modes. */
- movs pc, lr
- .endm
-
- .macro get_bad_stack_swi
- /* space on current stack for scratch reg. */
- sub r13, r13, #4
- /* save R0's value. */
- str r0, [r13]
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
- /* save caller lr in position 0 of saved stack */
- str lr, [r0]
- /* get the spsr */
- mrs lr, spsr
- /* save spsr in position 1 of saved stack */
- str lr, [r0, #4]
- /* restore lr */
- ldr lr, [r0]
- /* restore r0 */
- ldr r0, [r13]
- /* pop stack entry */
- add r13, r13, #4
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 1a34842..01c85be 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -15,48 +15,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-#ifdef CONFIG_SPL_BUILD
-_undefined_instruction: .word _undefined_instruction
-_software_interrupt: .word _software_interrupt
-_prefetch_abort: .word _prefetch_abort
-_data_abort: .word _data_abort
-_not_used: .word _not_used
-_irq: .word _irq
-_fiq: .word _fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#else
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from RAM!
@@ -67,26 +25,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -139,169 +78,3 @@ cpu_init_crit:
mov pc, lr
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
-
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- msr spsr_c, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index 9699404..623a635 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -16,7 +16,8 @@ SECTIONS
.text :
{
*(.__image_copy_start)
- arch/arm/cpu/arm920t/start.o (.text*)
+ *(.vectors)
+ arch/arm/cpu/arm920t/start.o (.text*)
/* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */
. = 0x1000;
LONG(0x53555243)
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 7bf094a..0740450 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -15,36 +15,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b start_code
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (called from the ARM reset exception vector)
*
* do important init only if we don't start from memory!
@@ -55,28 +25,9 @@ _fiq: .word fiq
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
+ .globl reset
-/*
- * the actual start code
- */
-
-start_code:
+reset:
/*
* set the cpu to SVC32 mode
*/
@@ -196,166 +147,3 @@ cpu_init_crit:
mov lr, ip
mov pc, lr
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r3} @ get pc, cpsr
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r7, sp, #S_PC
- stmdb r7, {sp, lr}^ @ Calling SP, LR
- str lr, [r7, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r7, #4] @ Save CPSR
- str r0, [r7, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- /* return & move spsr_svc into cpsr */
- subs pc, lr, #4
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S
index 34a0fcb..9b60436 100644
--- a/arch/arm/cpu/arm926ejs/mxs/start.S
+++ b/arch/arm/cpu/arm926ejs/mxs/start.S
@@ -27,70 +27,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:
- b reset
- b undefined_instruction
- b software_interrupt
- b prefetch_abort
- b data_abort
- b not_used
- b irq
- b fiq
-
-/*
- * Vector table, located at address 0x20.
- * This table allows the code running AFTER SPL, the U-Boot, to install it's
- * interrupt handlers here. The problem is that the U-Boot is loaded into RAM,
- * including it's interrupt vectoring table and the table at 0x0 is still the
- * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table
- * is still used.
- */
-_vt_reset:
- .word _reset
-_vt_undefined_instruction:
- .word _hang
-_vt_software_interrupt:
- .word _hang
-_vt_prefetch_abort:
- .word _hang
-_vt_data_abort:
- .word _hang
-_vt_not_used:
- .word _reset
-_vt_irq:
- .word _hang
-_vt_fiq:
- .word _hang
-
-reset:
- ldr pc, _vt_reset
-undefined_instruction:
- ldr pc, _vt_undefined_instruction
-software_interrupt:
- ldr pc, _vt_software_interrupt
-prefetch_abort:
- ldr pc, _vt_prefetch_abort
-data_abort:
- ldr pc, _vt_data_abort
-not_used:
- ldr pc, _vt_not_used
-irq:
- ldr pc, _vt_irq
-fiq:
- ldr pc, _vt_fiq
-
- .balignl 16,0xdeadbeef
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -101,28 +37,8 @@ fiq:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
-
-_reset:
+ .globl reset
+reset:
/*
* If the CPU is configured in "Wait JTAG connection mode", the stack
* pointer is not configured and is zero. This will cause crash when
@@ -179,7 +95,3 @@ _reset:
mov r0, #0
bx lr
-
-_hang:
-1:
- bl 1b /* hang and never return */
diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S
index 7dbd5db..290ac2e 100644
--- a/arch/arm/cpu/arm926ejs/spear/start.S
+++ b/arch/arm/cpu/arm926ejs/spear/start.S
@@ -17,29 +17,6 @@
#include <config.h>
-.globl _start
-_start:
- b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
-_software_interrupt:
-_prefetch_abort:
-_data_abort:
-_not_used:
-_irq:
-_fiq:
- .word infinite_loop
-
-infinite_loop:
- b infinite_loop
-
/*
*************************************************************************
*
@@ -53,9 +30,7 @@ infinite_loop:
*************************************************************************
*/
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index b6d0f65..c7ee199 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -21,6 +21,7 @@ SECTIONS
. = ALIGN(4);
.text :
{
+ *(.vectors)
arch/arm/cpu/arm926ejs/spear/start.o (.text*)
*(.text*)
}
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 0717327..8eb2494 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -23,75 +23,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
-.globl _start
-_start:
-.globl _NOR_BOOT_CFG
-_NOR_BOOT_CFG:
- .word CONFIG_SYS_DV_NOR_BOOT_CFG
- b reset
-#else
-.globl _start
-_start:
- b reset
-#endif
-#ifdef CONFIG_SPL_BUILD
-/* No exception handlers in preloader */
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-
-_hang:
- .word do_hang
-/* pad to 64 byte boundary */
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
-#else
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-
-#endif /* CONFIG_SPL_BUILD */
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -102,26 +33,7 @@ _fiq:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -198,175 +110,3 @@ flush_dcache:
mov lr, ip /* restore link */
mov pc, lr /* back to my caller */
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- @ carve out a frame on current user stack
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
- ldr r2, IRQ_STACK_START_IN
- @ get values for "aborted" pc and cpsr (into parm regs)
- ldmia r2, {r2 - r3}
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-#endif /* CONFIG_SPL_BUILD */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_SPL_BUILD
- .align 5
-do_hang:
-1:
- bl 1b /* hang and never return */
-#else /* !CONFIG_SPL_BUILD */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 9806819..4112371 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -22,43 +22,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:
- b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-
- .balignl 16,0xdeadbeef
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -69,26 +32,7 @@ _fiq:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -155,166 +99,3 @@ cpu_init_crit:
mov lr, ip /* restore link */
mov pc, lr /* back to my caller */
#endif
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- @ carve out a frame on current user stack
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN
- @ get values for "aborted" pc and cpsr (into parm regs)
- ldmia r2, {r2 - r3}
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 7404ea7..c0c07b6 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -21,42 +21,6 @@
/*
*************************************************************************
*
- * Jump vector table
- *
- *************************************************************************
- */
-
-.globl _start
-_start:
- b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-
- .balignl 16,0xdeadbeef
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -67,26 +31,7 @@ _fiq:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -132,174 +77,3 @@ cpu_init_crit:
*/
mov pc, lr /* back to my caller */
#endif
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- @ carve out a frame on current user stack
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN
- @ get values for "aborted" pc and cpsr (into parm regs)
- ldmia r2, {r2 - r3}
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-.globl undefined_instruction
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-.globl software_interrupt
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-.globl prefetch_abort
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-.globl data_abort
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-.globl not_used
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
- .align 5
-.globl irq
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-.globl fiq
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-.globl irq
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-.globl fiq
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
diff --git a/arch/arm/cpu/armv7/socfpga/lowlevel_init.S b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S
index 1caaa27..2f2e9fc 100644
--- a/arch/arm/cpu/armv7/socfpga/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S
@@ -10,20 +10,7 @@
/* Save the parameter pass in by previous boot loader */
.global save_boot_params
save_boot_params:
- /* save the parameter here */
-
- /*
- * Setup stack for exception, which is located
- * at the end of on-chip RAM. We don't expect exception prior to
- * relocation and if that happens, we won't worry -- it will overide
- * global data region as the code will goto reset. After relocation,
- * this region won't be used by other part of program.
- * Hence it is safe.
- */
- ldr r0, =(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
- ldr r1, =IRQ_STACK_START_IN
- str r0, [r1]
-
+ /* no parameter to save */
bx lr
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index eefe1ed..fedd7c8 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -19,43 +19,6 @@
#include <asm/system.h>
#include <linux/linkage.h>
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-#ifdef CONFIG_SPL_BUILD
-_undefined_instruction: .word _undefined_instruction
-_software_interrupt: .word _software_interrupt
-_prefetch_abort: .word _prefetch_abort
-_data_abort: .word _data_abort
-_not_used: .word _not_used
-_irq: .word _irq
-_fiq: .word _fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#else
-.globl _undefined_instruction
-_undefined_instruction: .word undefined_instruction
-.globl _software_interrupt
-_software_interrupt: .word software_interrupt
-.globl _prefetch_abort
-_prefetch_abort: .word prefetch_abort
-.globl _data_abort
-_data_abort: .word data_abort
-.globl _not_used
-_not_used: .word not_used
-.globl _irq
-_irq: .word irq
-.globl _fiq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-
- .balignl 16,0xdeadbeef
/*************************************************************************
*
* Startup Code (reset vector)
@@ -67,26 +30,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */
*
*************************************************************************/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
bl save_boot_params
@@ -247,195 +191,3 @@ ENTRY(cpu_init_crit)
b lowlevel_init @ go setup pll,mux,memory
ENDPROC(cpu_init_crit)
#endif
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current
- @ user stack
- stmia sp, {r0 - r12} @ Save user registers (now in
- @ svc mode) r0-r12
- ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort
- @ stack
- ldmia r2, {r2 - r3} @ get values for "aborted" pc
- @ and cpsr (into parm regs)
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0
- @ (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC @ !! R8 NEEDS to be saved !!
- @ a reserved stack spot would
- @ be good.
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into
- @ cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter
- @ in banked mode)
-
- str lr, [r13] @ save caller lr in position 0
- @ of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of
- @ saved stack
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure
- @ moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction &
- @ switch modes.
- .endm
-
- .macro get_bad_stack_swi
- sub r13, r13, #4 @ space on current stack for
- @ scratch reg.
- str r0, [r13] @ save R0's value.
- ldr r0, IRQ_STACK_START_IN @ get data regions start
- @ spots for abort stack
- str lr, [r0] @ save caller lr in position 0
- @ of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r0, #4] @ save spsr in position 1 of
- @ saved stack
- ldr lr, [r0] @ restore lr
- ldr r0, [r13] @ restore r0
- add r13, r13, #4 @ pop stack entry
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effective fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif /* CONFIG_USE_IRQ */
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds
index f2a5965..69500a6 100644
--- a/arch/arm/cpu/armv7/zynq/u-boot.lds
+++ b/arch/arm/cpu/armv7/zynq/u-boot.lds
@@ -88,7 +88,7 @@ SECTIONS
}
/*
- * Zynq needs to discard more sections because the user
+ * Zynq needs to discard these sections because the user
* is expected to pass this image on to tools for boot.bin
* generation that require them to be dropped.
*/
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index e3bf1c2..c77d51e 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -23,46 +23,6 @@
#include <config.h>
#include <version.h>
-.globl _start
-_start: b reset
-#ifdef CONFIG_SPL_BUILD
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-
-_hang:
- .word do_hang
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678 /* now 16*4=64 */
-#else
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-
- .balignl 16,0xdeadbeef
/*
*************************************************************************
*
@@ -76,26 +36,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -166,190 +107,6 @@ cpu_init_crit:
mov pc, lr /* back to my caller */
#endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack
- ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode)
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_bad_stack_swi
- sub r13, r13, #4 @ space on current stack for scratch reg.
- str r0, [r13] @ save R0's value.
- ldr r0, IRQ_STACK_START_IN @ get data regions start
- str lr, [r0] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r0, #4] @ save spsr in position 1 of saved stack
- ldr lr, [r0] @ restore lr
- ldr r0, [r13] @ restore r0
- add r13, r13, #4 @ pop stack entry
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-#endif /* CONFIG_SPL_BUILD */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_SPL_BUILD
- .align 5
-do_hang:
- bl hang /* hang and never return */
-#else /* !CONFIG_SPL_BUILD */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
- .align 5
-#endif /* CONFIG_SPL_BUILD */
-
-
/*
* Enable MMU to use DCache as DRAM.
*
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 472a595..78e0cb8 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -16,36 +16,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -56,26 +26,7 @@ _fiq: .word fiq
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -173,167 +124,3 @@ cpu_init_crit:
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
mov pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
-
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- msr spsr_c, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index 3e88668..4beddf0 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -18,6 +18,7 @@ SECTIONS
.text :
{
__image_copy_start = .;
+ *(.vectors)
CPUDIR/start.o (.text*)
*(.text*)
}
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 33c1f99..a7728e0 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -18,6 +18,7 @@ SECTIONS
.text :
{
*(.__image_copy_start)
+ *(.vectors)
CPUDIR/start.o (.text*)
*(.text*)
}
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index e035d6a..585f1f7 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@ lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _divsi3.o \
ifdef CONFIG_ARM64
obj-y += crt0_64.o
else
-obj-y += crt0.o
+obj-y += vectors.o crt0.o
endif
ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S
new file mode 100644
index 0000000..d68cc47
--- /dev/null
+++ b/arch/arm/lib/vectors.S
@@ -0,0 +1,291 @@
+/*
+ * vectors - Generic ARM exception table code
+ *
+ * Copyright (c) 1998 Dan Malek <dmalek at jlc.net>
+ * Copyright (c) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (c) 2000 Wolfgang Denk <wd at denx.de>
+ * Copyright (c) 2001 Alex Züpke <azu at sysgo.de>
+ * Copyright (c) 2001 Marius Gröger <mag at sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu at sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <garyj at denx.de>
+ * Copyright (c) 2002 Kyle Harris <kharris at nexus-tech.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ *************************************************************************
+ *
+ * Symbol _start is referenced elsewhere, so make it global
+ *
+ *************************************************************************
+ */
+
+.globl _start
+
+/*
+ *************************************************************************
+ *
+ * Vectors have their own section so linker script can map them easily
+ *
+ *************************************************************************
+ */
+
+ .section ".vectors", "x"
+
+/*
+ *************************************************************************
+ *
+ * Exception vectors as described in ARM reference manuals
+ *
+ * Uses indirect branch to allow reaching handlers anywhere in memory.
+ *
+ *************************************************************************
+ */
+
+_start:
+
+#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
+ .word CONFIG_SYS_DV_NOR_BOOT_CFG
+#endif
+
+_start:
+ ldr pc, _reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+/*
+ *************************************************************************
+ *
+ * Indirect vectors table
+ *
+ * Symbols referenced here must be defined somewhere else
+ *
+ *************************************************************************
+ */
+
+ .globl _undefined_instruction
+ .globl _software_interrupt
+ .globl _prefetch_abort
+ .globl _data_abort
+ .globl _not_used
+ .globl _irq
+ .globl _fiq
+
+_reset: .word reset
+_undefined_instruction: .word undefined_instruction
+_software_interrupt: .word software_interrupt
+_prefetch_abort: .word prefetch_abort
+_data_abort: .word data_abort
+_not_used: .word not_used
+_irq: .word irq
+_fiq: .word fiq
+
+ .balignl 16,0xdeadbeef
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+/* SPL interrupt handling: just hang */
+
+#ifdef CONFIG_SPL_BUILD
+
+ .align 5
+undefined_instruction:
+software_interrupt:
+prefetch_abort:
+data_abort:
+not_used:
+irq:
+fiq:
+
+1:
+ bl 1b /* hang and never return */
+
+#else /* !CONFIG_SPL_BUILD */
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+
+#endif /* CONFIG_USE_IRQ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ @ carve out a frame on current user stack
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+ ldr r2, IRQ_STACK_START_IN
+ @ get values for "aborted" pc and cpsr (into parm regs)
+ ldmia r2, {r2 - r3}
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, IRQ_STACK_START_IN @ setup our mode stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+/*
+ * exception handlers
+ */
+
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif /* CONFIG_USE_IRQ */
+
+#endif /* CONFIG_SPL_BUILD */
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds
index 0984dfe..c8ab716 100644
--- a/board/compulab/cm_t335/u-boot.lds
+++ b/board/compulab/cm_t335/u-boot.lds
@@ -18,6 +18,7 @@ SECTIONS
.text :
{
*(.__image_copy_start)
+ *(.vectors)
CPUDIR/start.o (.text*)
board/compulab/cm_t335/built-in.o (.text*)
*(.text*)
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 6da1d4b..61b83bf 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -22,6 +22,7 @@ SECTIONS
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
+ * (.vectors)
arch/arm/cpu/arm1136/start.o (.text*)
board/freescale/mx31ads/built-in.o (.text*)
arch/arm/lib/built-in.o (.text*)
diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds
index a9e3d34..2c5a0f8 100644
--- a/board/ti/am335x/u-boot.lds
+++ b/board/ti/am335x/u-boot.lds
@@ -34,6 +34,7 @@ SECTIONS
.text :
{
*(.__image_copy_start)
+ *(.vectors)
CPUDIR/start.o (.text*)
board/ti/am335x/built-in.o (.text*)
*(.text*)
--
1.8.3.2
More information about the U-Boot
mailing list