[U-Boot] [PATCH V3 3/3] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command
Pierre Aubert
p.aubert at staubli.com
Tue Apr 22 17:54:47 CEST 2014
This sub-command adds support for the RPMB partition of an eMMC:
* mmc rpmb key <address of the authentication key>
Programs the authentication key in the eMMC This key can not
be overwritten.
* mmc rpmb read <address> <block> <#count> [address of key]
Reads <#count> blocks of 256 bytes in the RPMB partition
beginning at block number <block>. If the optionnal
address of the authentication key is provided, the
Message Authentication Code (MAC) is verified on each
block.
* mmc rpmb write <address> <block> <#count> <address of key>
Writes <#count> blocks of 256 bytes in the RPMB partition
beginning at block number <block>. The datas are signed
with the key provided.
* mmc rpmb counter
Returns the 'Write counter' of the RPMB partition.
The sub-command is conditional on compilation flag CONFIG_SUPPORT_EMMC_RPMB
Signed-off-by: Pierre Aubert <p.aubert at staubli.com>
CC: Pantelis Antoniou <panto at antoniou-consulting.com>
---
README | 10 ++++
common/cmd_mmc.c | 123 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 132 insertions(+), 1 deletions(-)
diff --git a/README b/README
index 52a92e7..518e209 100644
--- a/README
+++ b/README
@@ -1493,6 +1493,16 @@ The following options need to be configured:
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
+ CONFIG_GENERIC_MMC
+ Enable the generic MMC driver
+
+ CONFIG_SUPPORT_EMMC_BOOT
+ Enable some additional features of the eMMC boot partitions.
+
+ CONFIG_SUPPORT_EMMC_RPMB
+ Enable the commands for reading, writing and programming the
+ key for the Replay Protection Memory Block partition in eMMC.
+
- USB Device Firmware Update (DFU) class support:
CONFIG_DFU_FUNCTION
This enables the USB portion of the DFU USB class
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index c1916c9..da8a243 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -130,7 +130,118 @@ U_BOOT_CMD(
"display MMC info",
"- display info of the current MMC device"
);
+#ifdef CONFIG_SUPPORT_EMMC_RPMB
+static int confirm_key_prog(void)
+{
+ puts("Warning: Programming authentication key can be done only once !\n"
+ " Use this command only if you are sure of what you are doing,\n"
+ "Really perform the key programming? <y/N> ");
+ if (confirm_yesno())
+ return 1;
+
+ puts("Authentication key programming aborted\n");
+ return 0;
+}
+static int do_mmcrpmb(int argc, char * const argv[])
+{
+ enum rpmb_state {
+ RPMB_INVALID,
+ RPMB_READ,
+ RPMB_WRITE,
+ RPMB_KEY,
+ RPMB_COUNTER,
+ } state;
+ struct mmc *mmc = find_mmc_device(curr_device);
+ void *key_addr;
+ char original_part;
+ int ret;
+
+ state = RPMB_INVALID;
+ if (argc == 4 && strcmp(argv[2], "key") == 0)
+ state = RPMB_KEY;
+ if ((argc == 6 || argc == 7) && strcmp(argv[2], "read") == 0)
+ state = RPMB_READ;
+ else if (argc == 7 && strcmp(argv[2], "write") == 0)
+ state = RPMB_WRITE;
+ else if (argc == 3 && strcmp(argv[2], "counter") == 0)
+ state = RPMB_COUNTER;
+
+ if (state == RPMB_INVALID)
+ return CMD_RET_USAGE;
+ if (!mmc) {
+ printf("no mmc device at slot %x\n", curr_device);
+ return CMD_RET_FAILURE;
+ }
+ mmc_init(mmc);
+ if (!(mmc->version & MMC_VERSION_MMC)) {
+ printf("It is not a EMMC device\n");
+ return CMD_RET_FAILURE;
+ }
+ if (mmc->version < MMC_VERSION_4_41) {
+ printf("RPMB not supported before version 4.41\n");
+ return CMD_RET_FAILURE;
+ }
+ /* Switch to the RPMB partition */
+ original_part = mmc->part_num;
+ if (mmc->part_num != MMC_PART_RPMB) {
+ if (mmc_switch_part(curr_device, MMC_PART_RPMB) != 0)
+ return CMD_RET_FAILURE;
+ mmc->part_num = MMC_PART_RPMB;
+ }
+ ret = CMD_RET_SUCCESS;
+ if (state == RPMB_KEY) {
+ key_addr = (void *)simple_strtoul(argv[3], NULL, 16);
+ if (!confirm_key_prog())
+ return CMD_RET_FAILURE;
+ if (mmc_rpmb_set_key(mmc, key_addr)) {
+ printf("ERROR - Key already programmed ?\n");
+ ret = CMD_RET_FAILURE;
+ }
+ } else if (state == RPMB_COUNTER) {
+ unsigned long counter;
+
+ if (mmc_rpmb_get_counter(mmc, &counter))
+ ret = CMD_RET_FAILURE;
+ else
+ printf("Write counter= %lx\n", counter);
+ } else {
+ u16 blk, cnt;
+ void *addr;
+ int n;
+
+ addr = (void *)simple_strtoul(argv[3], NULL, 16);
+ blk = simple_strtoul(argv[4], NULL, 16);
+ cnt = simple_strtoul(argv[5], NULL, 16);
+
+ if (state == RPMB_READ) {
+ key_addr = (argc == 7) ?
+ (void *)simple_strtoul(argv[6],
+ NULL, 16) :
+ NULL;
+ n = mmc_rpmb_read(mmc, addr, blk, cnt,
+ key_addr);
+ } else {
+ key_addr = (void *)simple_strtoul(argv[6],
+ NULL, 16);
+ n = mmc_rpmb_write(mmc, addr, blk, cnt,
+ key_addr);
+ }
+ printf("%d RPMB blocks %s: %s\n",
+ n, argv[2], (n == cnt) ? "OK" : "ERROR");
+ if (n != cnt)
+ ret = CMD_RET_FAILURE;
+ }
+
+ /* Return to orginal partition */
+ if (mmc->part_num != original_part) {
+ if (mmc_switch_part(curr_device, original_part) != 0)
+ return CMD_RET_FAILURE;
+ mmc->part_num = original_part;
+ }
+ return ret;
+}
+#endif
static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
enum mmc_state state;
@@ -365,6 +476,10 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return mmc_set_rst_n_function(mmc, enable);
#endif /* CONFIG_SUPPORT_EMMC_BOOT */
+#ifdef CONFIG_SUPPORT_EMMC_RPMB
+ } else if (strcmp(argv[1], "rpmb") == 0) {
+ return do_mmcrpmb(argc, argv);
+#endif /* CONFIG_SUPPORT_EMMC_RPMB */
}
else if (argc == 3 && strcmp(argv[1], "setdsr") == 0) {
@@ -454,7 +569,7 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
U_BOOT_CMD(
- mmc, 6, 1, do_mmcops,
+ mmc, 7, 1, do_mmcops,
"MMC sub system",
"read addr blk# cnt\n"
"mmc write addr blk# cnt\n"
@@ -474,6 +589,12 @@ U_BOOT_CMD(
" - Change the RST_n_FUNCTION field of the specified device\n"
" WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.\n"
#endif
+#ifdef CONFIG_SUPPORT_EMMC_RPMB
+ "mmc rpmb read addr blk# cnt [address of auth-key] - block size is 256 bytes\n"
+ "mmc rpmb write addr blk# cnt <address of auth-key> - block size is 256 bytes\n"
+ "mmc rpmb key <address of auth-key> - program the RPMB authentication key.\n"
+ "mmc rpmb counter - read the value of the write counter\n"
+#endif
"mmc setdsr - set DSR register value\n"
);
#endif /* !CONFIG_GENERIC_MMC */
--
1.7.6.5
More information about the U-Boot
mailing list