[U-Boot] [PATCH V2 3/8] OMAP3: zoom1: enable LAN9211

[Nishanth Menon]

Zoom1 was wrongly setup for LAN91C96. Fix it by enabling
LAN9211.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
 board/logicpd/zoom1/zoom1.c   |   20 ++++++++++++++++++--
 include/configs/omap3_zoom1.h |   10 +++++++++-
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 56e512f..461a852 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -102,9 +102,25 @@ int board_mmc_init(bd_t *bis)
 int board_eth_init(bd_t *bis)
 {
 	int rc = 0;
-#ifdef CONFIG_LAN91C96
-	rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
+
+#ifdef CONFIG_SMC911X
+#define STR_ENV_ETHADDR	"ethaddr"
+
+	struct eth_device *dev;
+	uchar eth_addr[6];
+
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+	if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) {
+		dev = eth_get_dev_by_index(0);
+		if (dev) {
+			eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr);
+		} else {
+			printf("zoom1: Couldn't get eth device\n");
+			rc = -1;
+		}
+	}
 #endif
+
 	return rc;
 }
 #endif
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index c4178d8..4a4dfd9 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -115,7 +115,7 @@
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #undef CONFIG_CMD_IMI		/* iminfo			*/
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
-#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
@@ -265,4 +265,12 @@
 
 #define CONFIG_SYS_CACHELINE_SIZE	64
 
+#ifdef CONFIG_CMD_NET
+/* Ethernet (LAN9211 from SMSC9118 family) */
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE		DEBUG_BASE
+
+#endif
+
 #endif				/* __CONFIG_H */
-- 
1.7.9.5