[U-Boot] [PATCHv2 05/10] mmc: remove the unnecessary define and fix the wrong bit control

[Jaehoon Chung]

Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
Reviewed-by: Lukasz Majeski <l.majewski at samsung.com>
---
 drivers/mmc/mmc.c |    2 +-
 include/mmc.h     |   18 ++++++------------
 2 files changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 8ab0bc9..bac07c2 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -518,7 +518,7 @@ static int mmc_change_freq(struct mmc *mmc)
 		return 0;
 
 	/* High Speed is set, there are two types: 52MHz and 26MHz */
-	if (cardtype & MMC_HS_52MHZ)
+	if (cardtype & EXT_CSD_CARD_TYPE_52)
 		mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 	else
 		mmc->card_caps |= MMC_MODE_HS;
diff --git a/include/mmc.h b/include/mmc.h
index b65ad9e..6725ac8 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -31,15 +31,12 @@
 #define MMC_VERSION_4_41	(MMC_VERSION_MMC | 0x429)
 #define MMC_VERSION_4_5		(MMC_VERSION_MMC | 0x405)
 
-#define MMC_MODE_HS		0x001
-#define MMC_MODE_HS_52MHz	0x010
-#define MMC_MODE_4BIT		0x100
-#define MMC_MODE_8BIT		0x200
-#define MMC_MODE_SPI		0x400
-#define MMC_MODE_HC		0x800
-
-#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
-#define MMC_MODE_WIDTH_BITS_SHIFT 8
+#define MMC_MODE_HS		(1 << 0)
+#define MMC_MODE_HS_52MHz	(1 << 1)
+#define MMC_MODE_4BIT		(1 << 2)
+#define MMC_MODE_8BIT		(1 << 3)
+#define MMC_MODE_SPI		(1 << 4)
+#define MMC_MODE_HC		(1 << 5)
 
 #define SD_DATA_4BIT	0x00040000
 
@@ -97,9 +94,6 @@
 #define SD_HIGHSPEED_BUSY	0x00020000
 #define SD_HIGHSPEED_SUPPORTED	0x00020000
 
-#define MMC_HS_TIMING		0x00000100
-#define MMC_HS_52MHZ		0x2
-
 #define OCR_BUSY		0x80000000
 #define OCR_HCS			0x40000000
 #define OCR_VOLTAGE_MASK	0x007FFF80
-- 
1.7.9.5