[U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init

Tim Harvey tharvey at gateworks.com
Wed Apr 23 06:53:57 CEST 2014


Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 board/gateworks/gw_ventana/gw_ventana.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index c130e2c..48e90e0 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -1077,10 +1077,11 @@ int misc_init_r(void)
 	}
 
 	/* configure PFUZE100 PMIC (not used on all Ventana baseboards) */
-	if ((board_type == GW54xx || board_type == GW54proto) &&
-	    !pmic_init(I2C_PMIC)) {
+	power_pfuze100_init(I2C_PMIC);
+	if (board_type == GW54xx || board_type == GW54proto) {
 		struct pmic *p = pmic_get("PFUZE100_PMIC");
 		u32 reg;
+
 		if (p && !pmic_probe(p)) {
 			pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
 			printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);
-- 
1.8.3.2



More information about the U-Boot mailing list