[U-Boot] [PATCH 6/10] driver/ifc: define nand_spl_load_image() for SPL

[Scott Wood]

On Mon, 2014-03-31 at 15:34 +0530, Prabhakar Kushwaha wrote:
> nand_spl_load_image() can also be used for non TPL framework.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> ---
>  drivers/mtd/nand/fsl_ifc_spl.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
> index 2f82f7c..8a7a3a3 100644
> --- a/drivers/mtd/nand/fsl_ifc_spl.c
> +++ b/drivers/mtd/nand/fsl_ifc_spl.c
> @@ -88,7 +88,7 @@ static inline int bad_block(uchar *marker, int port_size)
>  		return __raw_readw((u16 *)marker) != 0xffff;
>  }
>  
> -#ifdef CONFIG_TPL_BUILD
> +#if defined(CONFIG_TPL_BUILD) || defined(CONFIG_SPL_BUILD)
>  int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
>  #else
>  static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst)
> @@ -221,7 +221,7 @@ static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst)
>   * Defines a static function nand_load_image() here, because non-static makes
>   * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes)
>   */
> -#ifndef CONFIG_TPL_BUILD
> +#if !defined(CONFIG_TPL_BUILD) && !defined(CONFIG_SPL_BUILD)
>  #define nand_spl_load_image(offs, uboot_size, vdst) \
>  	nand_load(offs, uboot_size, vdst)
>  #endif

When would you ever use this file without having CONFIG_SPL_BUILD
defined?

-Scott