[U-Boot] [PATCH v2 03/16] sunxi: dram: Respect the DDR3 reset timing requirements

[Ian Campbell]

On Sun, 2014-08-03 at 05:32 +0300, Siarhei Siamashka wrote:
> The RESET pin needs to be kept low for at least 200 us according
> to the DDR3 spec. So just do it the right way.
> 
> This issue did not cause any visible major problems earlier, because
> the DRAM RESET pin is usually already low after the board reset. And
> the time gap before reaching the sunxi u-boot DRAM initialization
> code appeared to be sufficient.
> 
> Signed-off-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>

Acked-by: Ian Campbell <ijc at hellion.org.uk>