[U-Boot] [PATCH V4 07/19] i2c: imx: add macros to setup pads for multiple SoC types

Nikita Kiryanov nikita at compulab.co.il
Wed Aug 20 14:08:54 CEST 2014


Add macro which defines i2c_pads_info structs for multiple SoC types,
and a macro which selects the appropriate struct based on CPU type,
thus eliminating the need to manage multiple i2c pad configurations
manually when supporting multiple SoC types.

Cc: Stefano Babic <sbabic at denx.de>
Cc: Tim Harvey <tharvey at gateworks.com>
Acked-by: Tim Harvey <tharvey at gateworks.com>
Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
---
Changes in V4:
	- No changes.

Changes in V3:
	- No changes.

Changes in V2:
	- No changes.

 arch/arm/include/asm/imx-common/mxc_i2c.h | 33 +++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h
index 47a9edc..182c2f3 100644
--- a/arch/arm/include/asm/imx-common/mxc_i2c.h
+++ b/arch/arm/include/asm/imx-common/mxc_i2c.h
@@ -19,6 +19,39 @@ struct i2c_pads_info {
 	struct i2c_pin_ctrl sda;
 };
 
+#if defined(CONFIG_MX6QDL)
+#define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
+	struct i2c_pads_info mx6q_##name = {		\
+		.scl = {				\
+			.i2c_mode = MX6Q_##scl_i2c,	\
+			.gpio_mode = MX6Q_##scl_gpio,	\
+			.gp = scl_gp,			\
+		},					\
+		.sda = {				\
+			.i2c_mode = MX6Q_##sda_i2c,	\
+			.gpio_mode = MX6Q_##sda_gpio,	\
+			.gp = sda_gp,			\
+		}					\
+	};						\
+	struct i2c_pads_info mx6s_##name = {		\
+		.scl = {				\
+			.i2c_mode = MX6DL_##scl_i2c,	\
+			.gpio_mode = MX6DL_##scl_gpio,	\
+			.gp = scl_gp,			\
+		},					\
+		.sda = {				\
+			.i2c_mode = MX6DL_##sda_i2c,	\
+			.gpio_mode = MX6DL_##sda_gpio,	\
+			.gp = sda_gp,			\
+		}					\
+	};
+
+
+#define I2C_PADS_INFO(name)	\
+	(is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) ? \
+					&mx6q_##name : &mx6s_##name
+#endif
+
 void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
 		struct i2c_pads_info *p);
 void bus_i2c_init(void *base, int speed, int slave_addr,
-- 
1.9.1



More information about the U-Boot mailing list