[U-Boot] [PATCH 23/23] ARM: tegra: Enable PCIe on Jetson TK1

[Thierry Reding]

On Tue, Aug 26, 2014 at 03:54:50PM +0300, Tuomas Tynkkynen wrote:
> On 18/08/14 10:16, Thierry Reding wrote:
> [...]
> > +static int as3722_gpio_direction_output(u8 gpio, u8 level)
> > +{
> > +	u8 value;
> > +	int err;
> > +
> > +	if (gpio > 7)
> > +		return -EINVAL;
> > +
> > +	if (level == 0)
> > +		value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL;
> > +	else
> > +		value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH;
> > +
> > +	err = as3722_write(AS3722_GPIO_CONTROL(gpio), value);
> > +	if (err) {
> > +		error("as3722: failed to configure GPIO#%u as output: %d\n",
> > +		      gpio, err);
> > +		return err;
> > +	}
> > +
> > +	err = as3722_gpio_set(gpio, level);
> > +	if (err < 0) {
> > +		error("as3722: failed to set GPIO#%u high: %d\n", gpio, err);
> > +		return err;
> > +	}
> > +
> > +	return 0;
> > +}
> 
> This function doesn't work correctly if the GPIO was originally configured
> as inverted and low, which GPIO#2 seems to be.
> (as3722_read(AS3722_GPIO_CONTROL(2), &value) returns value == 0x87)...

That should be equivalent to what we're setting but is a somewhat weird
default. I guess the fact that we're inverting it and then changing the
value to high in separate transactions makes the output flip twice.

> > +
> > +int tegra_pcie_board_init(void)
> > +{
> [...]
> > +
> > +	err = as3722_gpio_direction_output(2, 1);
> > +	if (err < 0) {
> > +		error("as3722: failed to set GPIO#2 high: %d\n", err);
> > +		return err;
> > +	}
> [...]
> 
> On my board, this call results in UART corruption, like this:
> 
> tegra-pcie:   non-prefetchable memory: 0x13000000-0x20000000
> tegra-pcie:   prefetchable memory: 0x20000000-0x40000000
> ¥É½¥¹½bªÍ¥¹b2x1, 1x1 configuration
> ¹Í5Rþtegra-pcie: probing port 1, using 1 lanes
> 
> Likely because GPIO#2 controls the +3.3V_LP0 rail, which powers the UART
> level shifters. Commenting the function call out fixes the corruption and
> PCI-E still works fine.

If I add a udelay(500) after the above I'm not able to reproduce the
UART breakage anymore. But I guess making the AS3722 GPIO code smarter
would be helpful. In the kernel this is done by checking the invert bit
and then setting the value accordingly. I suppose the same could be done
for the mode bits. I'll see if I can work up a patch.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140827/a70598fd/attachment.pgp>