[U-Boot] [PATCH] ARM: DRA72: DDR3: Add emif settings for 666MHz clock
Lokesh Vutla
lokeshvutla at ti.com
Thu Aug 28 08:31:04 CEST 2014
From: R Sricharan <r.sricharan at ti.com>
On DRA72x, EMIF supports DDR3 upto 667MHz.
Adding the required settings for DDR3 at 666MHz and enabling it.
Signed-off-by: R Sricharan <r.sricharan at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm/cpu/armv7/omap5/hw_data.c | 39 +++++++++++++++++++++++--
arch/arm/cpu/armv7/omap5/sdram.c | 60 +++++++++++++++++++++++++++++++++++++-
2 files changed, 96 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 4db8492..95f1686 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -227,6 +227,16 @@ static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
};
+static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = {
+ {111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+};
+
static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
{266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
{266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
@@ -286,6 +296,17 @@ struct dplls dra7xx_dplls = {
.gmac = gmac_dpll_params_2000mhz,
};
+struct dplls dra72x_dplls = {
+ .mpu = mpu_dpll_params_1ghz,
+ .core = core_dpll_params_2128mhz_dra7xx,
+ .per = per_dpll_params_768mhz_dra7xx,
+ .abe = abe_dpll_params_sysclk2_361267khz,
+ .iva = iva_dpll_params_2330mhz_dra7xx,
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = ddr_dpll_params_2664mhz,
+ .gmac = gmac_dpll_params_2000mhz,
+};
+
struct pmic_data palmas = {
.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
.step = 10000, /* 10 mV represented in uV */
@@ -560,6 +581,18 @@ const struct ctrl_ioregs ioregs_dra7xx_es1 = {
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
};
+const struct ctrl_ioregs ioregs_dra72x_es1 = {
+ .ctrl_ddrch = 0x40404040,
+ .ctrl_lpddr2ch = 0x40404040,
+ .ctrl_ddr3ch = 0x60606080,
+ .ctrl_ddrio_0 = 0xA2084210,
+ .ctrl_ddrio_1 = 0x84210840,
+ .ctrl_ddrio_2 = 0x84210000,
+ .ctrl_emif_sdram_config_ext = 0x0001C1A7,
+ .ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
+ .ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
void __weak hw_data_init(void)
{
u32 omap_rev = omap_revision();
@@ -592,7 +625,7 @@ void __weak hw_data_init(void)
case DRA722_ES1_0:
*prcm = &dra7xx_prcm;
- *dplls_data = &dra7xx_dplls;
+ *dplls_data = &dra72x_dplls;
*omap_vcores = &dra722_volts;
*ctrl = &dra7xx_ctrl;
break;
@@ -619,9 +652,11 @@ void get_ioregs(const struct ctrl_ioregs **regs)
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
- case DRA722_ES1_0:
*regs = &ioregs_dra7xx_es1;
break;
+ case DRA722_ES1_0:
+ *regs = &ioregs_dra72x_es1;
+ break;
default:
printf("\n INVALID OMAP REVISION ");
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index ff9d603..7d8cec0 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -185,6 +185,30 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
.emif_rd_wr_exec_thresh = 0x00000305
};
+const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
+ .sdram_config_init = 0x61851AB2,
+ .sdram_config = 0x61851AB2,
+ .sdram_config2 = 0x08000000,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xCCCF36B3,
+ .sdram_tim2 = 0x308F7FDA,
+ .sdram_tim3 = 0x027F88A8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0024400A,
+ .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00A400A4,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00A900A9,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
.dmm_lisa_map_0 = 0x0,
.dmm_lisa_map_1 = 0x0,
@@ -267,6 +291,8 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
}
break;
case DRA722_ES1_0:
+ *regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1;
+ break;
default:
*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
}
@@ -450,6 +476,35 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = {
0x0
};
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = {
+ 0x00A400A4,
+ 0x00390039,
+ 0x00320032,
+ 0x00320032,
+ 0x00320032,
+ 0x00440044,
+ 0x00550055,
+ 0x00550055,
+ 0x00550055,
+ 0x00550055,
+ 0x007F007F,
+ 0x004D004D,
+ 0x00430043,
+ 0x00560056,
+ 0x00540054,
+ 0x00600060,
+ 0x0,
+ 0x00600020,
+ 0x40010080,
+ 0x08102040,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0
+};
+
const struct lpddr2_mr_regs mr_regs = {
.mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8,
.mr2 = 0x6,
@@ -478,7 +533,6 @@ void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
- case DRA722_ES1_0:
if (emif_nr == 1) {
*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
*size =
@@ -489,6 +543,10 @@ void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif2);
}
break;
+ case DRA722_ES1_0:
+ *regs = dra_ddr3_ext_phy_ctrl_const_base_666MHz;
+ *size = ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_666MHz);
+ break;
default:
*regs = ddr3_ext_phy_ctrl_const_base_es2;
*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
--
1.9.1
More information about the U-Boot
mailing list