[U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Jagan Teki
jagannadh.teki at gmail.com
Thu Aug 28 10:58:47 CEST 2014
On 15 July 2014 06:26, Simon Glass <sjg at chromium.org> wrote:
> Add a uclass which provides access to SPI buses and includes operations
> required by SPI.
>
> For a time driver model will need to co-exist with the legacy SPI interface
> so some parts of the header file are changed depending on which is in use.
> The exports are adjusted also since some functions are not available with
> driver model.
>
> Boards must define CONFIG_DM_SPI to use driver model for SPI.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> common/exports.c | 4 +-
> drivers/spi/Makefile | 4 +
> drivers/spi/spi-uclass.c | 253 +++++++++++++++++++++++++++++++++++++++++++++++
> include/dm/uclass-id.h | 1 +
> include/spi.h | 140 ++++++++++++++++++++++++++
> 5 files changed, 401 insertions(+), 1 deletion(-)
> create mode 100644 drivers/spi/spi-uclass.c
>
> diff --git a/common/exports.c b/common/exports.c
> index b97ca48..88fcfc8 100644
> --- a/common/exports.c
> +++ b/common/exports.c
> @@ -27,10 +27,12 @@ unsigned long get_version(void)
> # define i2c_write dummy
> # define i2c_read dummy
> #endif
> -#ifndef CONFIG_CMD_SPI
> +#if !defined(CONFIG_CMD_SPI) || defined(CONFIG_DM_SPI)
> # define spi_init dummy
> # define spi_setup_slave dummy
> # define spi_free_slave dummy
> +#endif
> +#ifndef CONFIG_CMD_SPI
> # define spi_claim_bus dummy
> # define spi_release_bus dummy
> # define spi_xfer dummy
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index f02c35a..d1f1dd0 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -6,7 +6,11 @@
> #
>
> # There are many options which enable SPI, so make this library available
> +ifdef CONFIG_DM_SPI
> +obj-y += spi-uclass.o
> +else
> obj-y += spi.o
> +endif
>
> obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o
> obj-$(CONFIG_ALTERA_SPI) += altera_spi.o
> diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
> new file mode 100644
> index 0000000..4057bce
> --- /dev/null
> +++ b/drivers/spi/spi-uclass.c
> @@ -0,0 +1,253 @@
> +/*
> + * Copyright (c) 2014 Google, Inc
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <fdtdec.h>
> +#include <spi.h>
> +#include <dm/device-internal.h>
> +#include <dm/uclass-internal.h>
> +#include <dm/root.h>
> +#include <dm/lists.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static int spi_set_speed_mode(struct udevice *bus, int speed, int mode)
> +{
> + struct dm_spi_ops *ops;
> + int ret;
> +
> + ops = spi_get_ops(bus);
> + if (ops->set_speed)
> + ret = (*ops->set_speed)(bus, speed);
> + else
> + ret = -EINVAL;
> + if (ret) {
> + printf("Cannot set speed (err=%d)\n", ret);
> + return ret;
> + }
> +
> + ops = spi_get_ops(bus);
> + if (ops->set_mode)
> + ret = (*ops->set_mode)(bus, mode);
> + else
> + ret = -EINVAL;
> + if (ret) {
> + printf("Cannot set mode (err=%d)\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +int spi_claim_bus(struct spi_slave *slave)
> +{
> + struct udevice *dev = slave->dev;
> + struct udevice *bus = dev->parent;
> + struct dm_spi_ops *ops = spi_get_ops(bus);
> + struct dm_spi_bus *spi = bus->uclass_priv;
> + int speed;
> + int ret;
> +
> + speed = slave->max_hz;
> + if (spi->max_hz) {
> + if (speed)
> + speed = min(speed, spi->max_hz);
> + else
> + speed = spi->max_hz;
> + }
> + if (!speed)
> + speed = 100000;
> + ret = spi_set_speed_mode(bus, speed, slave->mode);
> + if (ret)
> + return ret;
> +
> + return ops->claim_bus ? ops->claim_bus(bus) : 0;
> +}
> +
> +void spi_release_bus(struct spi_slave *slave)
> +{
> + struct udevice *dev = slave->dev;
> + struct udevice *bus = dev->parent;
> + struct dm_spi_ops *ops = spi_get_ops(bus);
> +
> + if (ops->release_bus)
> + spi_get_ops(bus)->release_bus(bus);
> +}
> +
> +int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
> + const void *dout, void *din, unsigned long flags)
> +{
> + struct udevice *dev = slave->dev;
> + struct udevice *bus = dev->parent;
> +
> + if (bus->uclass->uc_drv->id != UCLASS_SPI)
> + return -EOPNOTSUPP;
> +
> + return spi_get_ops(bus)->xfer(bus, dev, bitlen, dout, din, flags);
> +}
Cleared all these calls, as individual drivers/spi* will setup their
ops and fills
the priv data. So this uclass will call accordingly - correct? add if
I'm missing anything.
> +
> +int spi_post_bind(struct udevice *dev)
> +{
> + /* Scan the bus for devices */
> + return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
> +}
> +
> +int spi_post_probe(struct udevice *dev)
> +{
> + struct dm_spi_bus *spi = dev->uclass_priv;
> +
> + spi->max_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
> + "spi-max-frequency", 0);
> +
> + return 0;
> +}
Anyway each spi driver will fills the data from dtb - like
spi-max-frequency, why the spi
core (uclass) will do the same.
Can't we reuse the spi_slave, why dm_spi_bus?
> +
> +int spi_bind_device(struct udevice *bus, int cs, const char *drv_name,
> + const char *dev_name, struct udevice **slavep)
> +{
> + struct driver *drv;
> + int ret;
> +
> + drv = lists_driver_lookup_name(drv_name);
> + if (!drv) {
> + puts("Cannot find spi_flash_std driver\n");
> + return -ENOENT;
> + }
> + ret = device_bind(bus, drv, dev_name, NULL, -1, slavep);
> + if (ret) {
> + printf("Cannot create device named '%s' (err=%d)\n",
> + dev_name, ret);
> + return ret;
> + }
> + (*slavep)->req_seq = cs;
> +
> + return 0;
> +}
> +
> +int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
> + struct udevice **devp)
> +{
> + struct udevice *bus, *dev;
> + int ret;
> +
> + ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, false, &bus);
> + if (ret)
> + return ret;
> + ret = device_find_child_by_seq(bus, cs, false, &dev);
> + if (ret)
> + return ret;
> + *busp = bus;
> + *devp = dev;
> +
> + return ret;
> +}
> +
> +int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
> + const char *drv_name, const char *dev_name,
> + struct udevice **devp, struct spi_slave **slavep)
> +{
> + struct udevice *bus, *dev;
> + int ret;
> +
> + ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
> + if (ret) {
> + printf("Invalid bus %d (err=%d)\n", busnum, ret);
> + return ret;
> + }
> + ret = device_get_child_by_seq(bus, cs, &dev);
> +
> + /**
> + * If there is no such device, create one automatically. This means
> + * that we don't need a device tree node or platform data for the
> + * SPI flash chip - we will bind to the correct driver.
> + */
> + if (ret == -ENODEV && drv_name) {
> + ret = spi_bind_device(bus, cs, drv_name, dev_name, &dev);
> + if (ret)
> + return ret;
> + }
> + if (ret) {
> + printf("Invalid chip select %d:%d (err=%d)\n", busnum, cs,
> + ret);
> + return ret;
> + }
> +
> + ret = spi_set_speed_mode(bus, speed, mode);
> + if (ret)
> + return ret;
> +
> + *devp = bus;
> + *slavep = dev_get_parentdata(dev);
> +
> + return 0;
> +}
I guess this is one of the replacement for spi_setup_slave() in spi drivers, so
how bus and cs member will populate to drivers.
Usually bus and cs members from spi_slave will populate to drivers through
"sf probe" so spi_cs_activate will set the respective chip-select and
along with
reg_base in driver select through bus value.
spi_setup_slave() {
...
zslave->base = get_zynq_spi_base(bus);
...
}
How these will handling with dm?
> +
> +/* Compatibility function - to be removed */
> +struct spi_slave *spi_setup_slave_fdt(const void *blob, int node,
> + int bus_node)
> +{
> + struct udevice *bus, *dev;
> + int ret;
> +
> + ret = uclass_get_device_by_of_offset(UCLASS_SPI, bus_node, &bus);
> + if (ret)
> + return NULL;
> + ret = device_get_child_by_of_offset(bus, node, &dev);
> + if (ret)
> + return NULL;
> + return dev_get_parentdata(dev);
> +}
> +
> +/* Compatibility function - to be removed */
> +struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
> + unsigned int speed, unsigned int mode)
> +{
> + struct spi_slave *slave;
> + struct udevice *dev;
> + int ret;
> +
> + ret = spi_get_bus_and_cs(busnum, cs, speed, mode, NULL, 0, &dev,
> + &slave);
> + if (ret)
> + return NULL;
> +
> + return slave;
> +}
> +
> +void spi_free_slave(struct spi_slave *slave)
> +{
> + device_remove(slave->dev);
> + slave->dev = NULL;
> +}
> +
> +int spi_ofdata_to_platdata(const void *blob, int node,
> + struct spi_slave *spi)
> +{
> + int mode = 0;
> +
> + spi->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 0);
> + if (fdtdec_get_bool(blob, node, "spi-cpol"))
> + mode |= SPI_CPOL;
> + if (fdtdec_get_bool(blob, node, "spi-cpha"))
> + mode |= SPI_CPHA;
> + if (fdtdec_get_bool(blob, node, "spi-cs-high"))
> + mode |= SPI_CS_HIGH;
> + if (fdtdec_get_bool(blob, node, "spi-half-duplex"))
> + mode |= SPI_PREAMBLE;
> + spi->mode = mode;
> +
> + return 0;
> +}
> +
> +UCLASS_DRIVER(spi) = {
> + .id = UCLASS_SPI,
> + .name = "spi",
> + .post_bind = spi_post_bind,
> + .post_probe = spi_post_probe,
> + .per_device_auto_alloc_size = sizeof(struct dm_spi_bus),
> +};
> diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
> index 7f0e37b..8207483 100644
> --- a/include/dm/uclass-id.h
> +++ b/include/dm/uclass-id.h
> @@ -22,6 +22,7 @@ enum uclass_id {
> /* U-Boot uclasses start here */
> UCLASS_GPIO, /* Bank of general-purpose I/O pins */
> UCLASS_SERIAL, /* Serial UART */
> + UCLASS_SPI, /* SPI bus */
>
> UCLASS_COUNT,
> UCLASS_INVALID = -1,
> diff --git a/include/spi.h b/include/spi.h
> index b673be2..b5e9347 100644
> --- a/include/spi.h
> +++ b/include/spi.h
> @@ -54,11 +54,19 @@
>
> #define SPI_DEFAULT_WORDLEN 8
>
> +#ifdef CONFIG_DM_SPI
> +struct dm_spi_bus {
> + uint max_hz;
> +};
> +
> +#endif /* CONFIG_DM_SPI */
> +
No idea why this should require, max_hz is already a part of spi_slave
and handling of these like getting from dtb and process and fill on priv
data should be part of individual drivers and filling spi_slave member should
be part of uclass - based on my understanding.
Any comments?
> /**
> * struct spi_slave - Representation of a SPI slave
> *
> * Drivers are expected to extend this with controller-specific data.
> *
> + * @dev: SPI slave device
Missing comments for max_hz and mode
> * @bus: ID of the bus that the slave is attached to.
> * @cs: ID of the chip select connected to the slave.
> * @op_mode_rx: SPI RX operation mode.
> @@ -71,8 +79,14 @@
> * @flags: Indication of SPI flags.
> */
> struct spi_slave {
> +#ifdef CONFIG_DM_SPI
> + struct udevice *dev; /* struct spi_slave is dev->parentdata */
> + uint max_hz;
> + uint mode;
> +#else
> unsigned int bus;
> unsigned int cs;
> +#endif
> u8 op_mode_rx;
> u8 op_mode_tx;
> unsigned int wordlen;
> @@ -220,6 +234,8 @@ int spi_set_wordlen(struct spi_slave *slave, unsigned int wordlen);
> int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
> void *din, unsigned long flags);
>
> +#ifndef CONFIG_DM_SPI
> +
> /**
> * Determine if a SPI chipselect is valid.
> * This function is provided by the board if the low-level SPI driver
> @@ -255,6 +271,7 @@ void spi_cs_deactivate(struct spi_slave *slave);
> * @hz: The transfer speed
> */
> void spi_set_speed(struct spi_slave *slave, uint hz);
> +#endif
>
> /**
> * Write 8 bits, then read 8 bits.
> @@ -305,4 +322,127 @@ struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
> struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
> int node);
>
> +#ifdef CONFIG_DM_SPI
> +
> +/**
> + * struct struct dm_spi_ops - Driver model SPI operations
> + *
> + * The uclass interface is implemented by all SPI devices which use
> + * driver model.
> + */
> +struct dm_spi_ops {
> + /**
> + * Claim the bus and prepare it for communication.
> + *
> + * The device privided is the slave device. It's parent controller
> + * will be used to provide the communication.
> + *
> + * This must be called before doing any transfers with a SPI slave. It
> + * will enable and initialize any SPI hardware as necessary, and make
> + * sure that the SCK line is in the correct idle state. It is not
> + * allowed to claim the same bus for several slaves without releasing
> + * the bus in between.
> + *
> + * @device: The SPI slave
> + *
> + * Returns: 0 if the bus was claimed successfully, or a negative value
> + * if it wasn't.
> + */
> + int (*claim_bus)(struct udevice *device);
> +
> + /**
> + * Release the SPI bus
> + *
> + * This must be called once for every call to spi_claim_bus() after
> + * all transfers have finished. It may disable any SPI hardware as
> + * appropriate.
> + *
> + * @device: The SPI slave
> + */
> + int (*release_bus)(struct udevice *device);
> +
> + /**
> + * Set the word length for SPI transactions
> + *
> + * Set the word length (number of bits per word) for SPI transactions.
> + *
> + * @device: The SPI slave
> + * @wordlen: The number of bits in a word
> + *
> + * Returns: 0 on success, -ve on failure.
> + */
> + int (*set_wordlen)(struct udevice *deiuce, unsigned int wordlen);
> +
> + /**
> + * SPI transfer
> + *
> + * This writes "bitlen" bits out the SPI MOSI port and simultaneously
> + * clocks "bitlen" bits in the SPI MISO port. That's just the way SPI
> + * works.
> + *
> + * The source of the outgoing bits is the "dout" parameter and the
> + * destination of the input bits is the "din" parameter. Note that
> + * "dout" and "din" can point to the same memory location, in which
> + * case the input data overwrites the output data (since both are
> + * buffered by temporary variables, this is OK).
> + *
> + * spi_xfer() interface:
> + * @device: The SPI bus which will be sending/receiving the data.
> + * @slave: The slave device to communicate with
> + * @bitlen: How many bits to write and read.
> + * @dout: Pointer to a string of bits to send out. The bits are
> + * held in a byte array and are sent MSB first.
> + * @din: Pointer to a string of bits that will be filled in.
> + * @flags: A bitwise combination of SPI_XFER_* flags.
> + *
> + * Returns: 0 on success, not -1 on failure
> + */
> + int (*xfer)(struct udevice *device, struct udevice *slave,
> + unsigned int bitlen, const void *dout, void *din,
> + unsigned long flags);
> +
> + /**
> + * Set transfer speed.
> + * This sets a new speed to be applied for next spi_xfer().
> + * @slave: The SPI slave
> + * @hz: The transfer speed
> + * @return 0 if OK, -ve on error
> + */
> + int (*set_speed)(struct udevice *device, uint hz);
> +
> + /**
> + * Set the SPI mode/flags
> + *
> + * It is unclear if we want to set speed and mode together instead
> + * of separately.
> + *
> + * @slave: The SPI slave
> + * @mode: Requested SPI mode (SPI_... flags)
> + * @return 0 if OK, -ve on error
> + */
> + int (*set_mode)(struct udevice *device, uint mode);
> +};
> +
> +int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
> + struct udevice **devp);
> +
> +int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
> + const char *drv_name, const char *dev_name,
> + struct udevice **devp, struct spi_slave **slavep);
> +
> +int spi_bind_device(struct udevice *bus, int cs, const char *drv_name,
> + const char *dev_name, struct udevice **slavep);
> +
> +int spi_ofdata_to_platdata(const void *blob, int node,
> + struct spi_slave *spi);
> +
> +struct sandbox_state;
> +int sandbox_spi_get_emul(struct sandbox_state *state,
> + struct udevice *bus, struct udevice *slave,
> + struct udevice **emulp);
> +
> +/* Access the serial operations for a device */
> +#define spi_get_ops(dev) ((struct dm_spi_ops *)(dev)->driver->ops)
> +#endif /* CONFIG_DM_SPI */
> +
> #endif /* _SPI_H_ */
> --
> 2.0.0.526.g5318336
>
thanks!
--
Jagan.
More information about the U-Boot
mailing list