[U-Boot] [PATCH 19/25] x86: Add crownbay defconfig and config.h

[Simon Glass]

Hi Bin,

On 4 December 2014 at 08:03, Bin Meng <bmeng.cn at gmail.com> wrote:
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>  configs/crownbay_defconfig |  6 ++++++
>  include/configs/crownbay.h | 52 ++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 58 insertions(+)
>  create mode 100644 configs/crownbay_defconfig
>  create mode 100644 include/configs/crownbay.h
>
> diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
> new file mode 100644
> index 0000000..ce90553
> --- /dev/null
> +++ b/configs/crownbay_defconfig
> @@ -0,0 +1,6 @@
> +CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000"
> +CONFIG_X86=y
> +CONFIG_TARGET_CROWNBAY=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_OF_SEPARATE=y
> +CONFIG_DEFAULT_DEVICE_TREE="crownbay"
> diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
> new file mode 100644
> index 0000000..2314e62
> --- /dev/null
> +++ b/include/configs/crownbay.h
> @@ -0,0 +1,52 @@
> +/*
> + * Copyright (C) 2014, Bin Meng <bmeng.cn at gmail.com>
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +/*
> + * board/config.h - configuration options, board specific
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <configs/x86-common.h>
> +
> +#define CONFIG_SYS_MONITOR_LEN         (1 << 20)
> +#define CONFIG_SYS_X86_START16         0xfffff800
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> +#define CONFIG_X86_RESET_VECTOR
> +#define CONFIG_NR_DRAM_BANKS           1
> +
> +#define CONFIG_COREBOOT_SERIAL

Do you think you could create a patch to rename this to x86_serial?

> +#define CONFIG_SMSC_LPC47M
> +
> +#define CONFIG_PCI_MEM_BUS             0x40000000
> +#define CONFIG_PCI_MEM_PHYS            CONFIG_PCI_MEM_BUS
> +#define CONFIG_PCI_MEM_SIZE            0x80000000
> +
> +#define CONFIG_PCI_PREF_BUS            0xc0000000
> +#define CONFIG_PCI_PREF_PHYS           CONFIG_PCI_PREF_BUS
> +#define CONFIG_PCI_PREF_SIZE           0x20000000
> +
> +#define CONFIG_PCI_IO_BUS              0x2000
> +#define CONFIG_PCI_IO_PHYS             CONFIG_PCI_IO_BUS
> +#define CONFIG_PCI_IO_SIZE             0xe000
> +
> +#define CONFIG_SYS_EARLY_PCI_INIT
> +#define CONFIG_PCI_PNP
> +
> +#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial\0" \
> +                                       "stdout=serial\0" \
> +                                       "stderr=serial\0"
> +
> +#define CONFIG_SCSI_DEV_LIST            \
> +       {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
> +
> +/* Video is not supported */
> +#undef CONFIG_VIDEO
> +#undef CONFIG_CFB_CONSOLE

Why is video not supported?

> +
> +#endif /* __CONFIG_H */
> --
> 1.8.2.1
>

Regards,
Simon