[U-Boot] [PATCH 19/25] x86: Add crownbay defconfig and config.h

[Bin Meng]

Hi Simon,

On Fri, Dec 5, 2014 at 7:56 AM, Simon Glass <sjg at chromium.org> wrote:
> Hi Bin,
>
> On 4 December 2014 at 08:03, Bin Meng <bmeng.cn at gmail.com> wrote:
>> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>> ---
>>  configs/crownbay_defconfig |  6 ++++++
>>  include/configs/crownbay.h | 52 ++++++++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 58 insertions(+)
>>  create mode 100644 configs/crownbay_defconfig
>>  create mode 100644 include/configs/crownbay.h
>>
>> diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
>> new file mode 100644
>> index 0000000..ce90553
>> --- /dev/null
>> +++ b/configs/crownbay_defconfig
>> @@ -0,0 +1,6 @@
>> +CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000"
>> +CONFIG_X86=y
>> +CONFIG_TARGET_CROWNBAY=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_OF_SEPARATE=y
>> +CONFIG_DEFAULT_DEVICE_TREE="crownbay"
>> diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
>> new file mode 100644
>> index 0000000..2314e62
>> --- /dev/null
>> +++ b/include/configs/crownbay.h
>> @@ -0,0 +1,52 @@
>> +/*
>> + * Copyright (C) 2014, Bin Meng <bmeng.cn at gmail.com>
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +
>> +/*
>> + * board/config.h - configuration options, board specific
>> + */
>> +
>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +
>> +#include <configs/x86-common.h>
>> +
>> +#define CONFIG_SYS_MONITOR_LEN         (1 << 20)
>> +#define CONFIG_SYS_X86_START16         0xfffff800
>> +#define CONFIG_BOARD_EARLY_INIT_F
>> +
>> +#define CONFIG_X86_RESET_VECTOR
>> +#define CONFIG_NR_DRAM_BANKS           1
>> +
>> +#define CONFIG_COREBOOT_SERIAL
>
> Do you think you could create a patch to rename this to x86_serial?

Sure, I can.

>> +#define CONFIG_SMSC_LPC47M
>> +
>> +#define CONFIG_PCI_MEM_BUS             0x40000000
>> +#define CONFIG_PCI_MEM_PHYS            CONFIG_PCI_MEM_BUS
>> +#define CONFIG_PCI_MEM_SIZE            0x80000000
>> +
>> +#define CONFIG_PCI_PREF_BUS            0xc0000000
>> +#define CONFIG_PCI_PREF_PHYS           CONFIG_PCI_PREF_BUS
>> +#define CONFIG_PCI_PREF_SIZE           0x20000000
>> +
>> +#define CONFIG_PCI_IO_BUS              0x2000
>> +#define CONFIG_PCI_IO_PHYS             CONFIG_PCI_IO_BUS
>> +#define CONFIG_PCI_IO_SIZE             0xe000
>> +
>> +#define CONFIG_SYS_EARLY_PCI_INIT
>> +#define CONFIG_PCI_PNP
>> +
>> +#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial\0" \
>> +                                       "stdout=serial\0" \
>> +                                       "stderr=serial\0"
>> +
>> +#define CONFIG_SCSI_DEV_LIST            \
>> +       {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
>> +
>> +/* Video is not supported */
>> +#undef CONFIG_VIDEO
>> +#undef CONFIG_CFB_CONSOLE
>
> Why is video not supported?
>

Tunnel Creek has one GPU integrated, but on my Crown Bay board, the
output siginal is routed to LVDS to be connected to an external LCD,
which I don't have for now. There is no public datasheet describing
the details about the integrated GPU, neither did I found a legacy
video ROM supporting that. There seems to be a UEFI native graphics
driver from Intel, but that means I will need study that and write a
U-Boot native graphics driver, which needs some time. Maybe supporting
PCIe based graphics card is an option, and I will find some time to
try that.

Regards,
Bin