[U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY

[York Sun]

On 11/10/2014 02:32 AM, Shengzhou Liu wrote:
> Add support for Cortina CS4315/CS4340 10G PHY.
> - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
>   to initialize Cortina PHY.
> - Cortina PHY has non-standard offset of PHY ID registers, thus
>   we define own get_phy_id() to override default get_phy_id().
> - To define macro CONFIG_PHY_CORTINA will enable this driver.
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> ---
> v7: reorder it in alphabetical order in Makefile
> v6: polish it in phy.c and phy.h in alphabetical order 
> v5: fix unclaimed variable in case of nand boot.
> v4: add support for loading cortina phy ucode from NAND/SPI/SD
> v3: move devad as '0' in cortina.c instead of in phy.c
> v2: no change.
> 
Applied to u-boot-mpc85xx, awaiting upstream.

York