[U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY

[Joe Hershberger]

Hi York,

On Fri, Dec 5, 2014 at 10:27 AM, York Sun <yorksun at freescale.com> wrote:
>
> On 11/10/2014 02:32 AM, Shengzhou Liu wrote:
> > Add support for Cortina CS4315/CS4340 10G PHY.
> > - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
> >   to initialize Cortina PHY.
> > - Cortina PHY has non-standard offset of PHY ID registers, thus
> >   we define own get_phy_id() to override default get_phy_id().
> > - To define macro CONFIG_PHY_CORTINA will enable this driver.
> >
> > Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> > ---
> > v7: reorder it in alphabetical order in Makefile
> > v6: polish it in phy.c and phy.h in alphabetical order
> > v5: fix unclaimed variable in case of nand boot.
> > v4: add support for loading cortina phy ucode from NAND/SPI/SD
> > v3: move devad as '0' in cortina.c instead of in phy.c
> > v2: no change.
> >
> Applied to u-boot-mpc85xx, awaiting upstream.

Were my concerns from Nov 25 addressed?

Thanks,
-Joe