[U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY

[York Sun]

On 12/05/2014 08:29 AM, Joe Hershberger wrote:
> Hi York,
> 
> On Fri, Dec 5, 2014 at 10:27 AM, York Sun <yorksun at freescale.com
> <mailto:yorksun at freescale.com>> wrote:
>>
>> On 11/10/2014 02:32 AM, Shengzhou Liu wrote:
>> > Add support for Cortina CS4315/CS4340 10G PHY.
>> > - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
>> >   to initialize Cortina PHY.
>> > - Cortina PHY has non-standard offset of PHY ID registers, thus
>> >   we define own get_phy_id() to override default get_phy_id().
>> > - To define macro CONFIG_PHY_CORTINA will enable this driver.
>> >
>> > Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com
> <mailto:Shengzhou.Liu at freescale.com>>
>> > ---
>> > v7: reorder it in alphabetical order in Makefile
>> > v6: polish it in phy.c and phy.h in alphabetical order
>> > v5: fix unclaimed variable in case of nand boot.
>> > v4: add support for loading cortina phy ucode from NAND/SPI/SD
>> > v3: move devad as '0' in cortina.c instead of in phy.c
>> > v2: no change.
>> >
>> Applied to u-boot-mpc85xx, awaiting upstream.
> 
> Were my concerns from Nov 25 addressed?
> 

No. Somehow I missed your comment. My apology.
Shengzhou, please follow up and address the comments. Please send additional
patch if needed.

York