[U-Boot] [PATCH 2/9 v2] powerpc/mpc85xx: Add T1024/T1023 SoC support

[York Sun]

On 11/24/2014 01:11 AM, Shengzhou Liu wrote:
> Add support for Freescale T1024/T1023 SoC.
> 
> The T1024 SoC includes the following function and features:
> - Two 64-bit Power architecture e5500 cores, up to 1.4GHz
> - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC)
> - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
> - Data Path Acceleration Architecture (DPAA) incorporating acceleration
> - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI)
> - High-speed peripheral interfaces
>   - Three PCI Express 2.0 controllers
> - Additional peripheral interfaces
>   - One SATA 2.0 controller
>   - Two USB 2.0 controllers with integrated PHY
>   - Enhanced secure digital host controller (SD/eSDHC/eMMC)
>   - Enhanced serial peripheral interface (eSPI)
>   - Four I2C controllers
>   - Four 2-pin UARTs or two 4-pin UARTs
>   - Integrated Flash Controller supporting NAND and NOR flash
> - Two 8-channel DMA engines
> - Multicore programmable interrupt controller (PIC)
> - LCD interface (DIU) with 12 bit dual data rate
> - QUICC Engine block supporting TDM, HDLC, and UART
> - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
> - Support for hardware virtualization and partitioning enforcement
> - QorIQ Platform's Trust Architecture 2.0
> 
> Differences between T1024 and T1023:
>   Feature         T1024  T1023
>   QUICC Engine:   yes    no
>   DIU:            yes    no
>   Deep Sleep:     yes    no
>   I2C controller: 4      3
>   DDR:            64-bit 32-bit
>   IFC:            32-bit 28-bit
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> ---
> v2: add new serdes 0x135 and 0x119 in t1024_serdes.c
> 

Applied to u-boot-mpc85xx, awaiting upstream.

York