[U-Boot] [PATCH 4/9 v2] powerpc/t1024rdb: Add T1024 RDB board support

[York Sun]

On 11/24/2014 01:11 AM, Shengzhou Liu wrote:
> T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC.
> 
> T1024RDB board Overview
> -----------------------
> - T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
> - CoreNet fabric supporting coherent and noncoherent transactions with
>   prioritization and bandwidth allocation
> - 32-/64-bit DDR3L SDRAM memory controller with ECC and interleaving support
> - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
> - Ethernet interfaces:
>   - Two 10M/100M/1G RGMII ports on-board
>   - one 10Gbps XFI interface
> - PCIe: Three PCIe controllers: one PCIe Slot and two Mini-PCIe connectors.
> - SerDes: 4 lanes up to 10.3125GHz
> - IFC: 128MB NOR Flash, 512MB NAND Flash and CPLD
> - eSPI: 64MB N25Q512 SPI flash.
> - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
> - USB: Two  Type-A USB2.0 ports with internal PHY
> - eSDHC: Support SD, SDHC, SDXC and MMC/eMMC
> - I2C: Four I2C controllers
> - UART: Two UART serial ports
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> ---
> v2: no change.
> 

Fix ft_board_setup() type
Fix MAINTAINERS for SECURE_BOOT
Fix Kconfig by adding SUPPORT_SPL

Applied to u-boot-mpc85xx, awaiting upstream.

York