[U-Boot] [PATCH 4/4] sf: Enable byte program support
Jagannadha Sutradharudu Teki
jagannadh.teki at gmail.com
Tue Dec 9 16:29:40 CET 2014
Enabled byte program support for sst flashes in sf.
Few controllers will only support BP, so this patch
gives a rx transfer flag to set the BP so-that sf
will operate on byte program transfer.
Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
---
drivers/mtd/spi/sf_internal.h | 5 ++++-
drivers/mtd/spi/sf_params.c | 18 +++++++++---------
drivers/mtd/spi/sf_probe.c | 8 ++++++--
include/spi.h | 1 +
4 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index fb53cb0..785f7a9 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -40,10 +40,13 @@ enum {
SECT_4K = 1 << 0,
SECT_32K = 1 << 1,
E_FSR = 1 << 2,
- WR_QPP = 1 << 3,
+ SST_BP = 1 << 3,
SST_WP = 1 << 4,
+ WR_QPP = 1 << 5,
};
+#define SST_WR (SST_BP | SST_WP)
+
#define SPI_FLASH_3B_ADDR_LEN 3
#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
#define SPI_FLASH_16MB_BOUN 0x1000000
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index 0f1f837..30875b3 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -89,16 +89,16 @@ const struct spi_flash_params spi_flash_params_table[] = {
{"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_SST /* SST */
- {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WP},
- {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WP},
- {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K | SST_WP},
- {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K | SST_WP},
+ {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
+ {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
+ {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K | SST_WR},
+ {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K | SST_WR},
{"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, RD_NORM, SECT_4K | SST_WP},
- {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_NORM, SECT_4K | SST_WP},
- {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K | SST_WP},
- {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WP},
- {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WP},
+ {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
#endif
#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
{"W25P80", 0xef2014, 0x0, 64 * 1024, 16, RD_NORM, 0},
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 7cde4c0..ce9987f 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -136,8 +136,12 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
#ifndef CONFIG_DM_SPI_FLASH
flash->write = spi_flash_cmd_write_ops;
#if defined(CONFIG_SPI_FLASH_SST)
- if (params->flags & SST_WP)
- flash->write = sst_write_wp;
+ if (params->flags & SST_WR) {
+ if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
+ flash->write = sst_write_bp;
+ else
+ flash->write = sst_write_wp;
+ }
#endif
flash->erase = spi_flash_cmd_erase_ops;
flash->read = spi_flash_cmd_read_ops;
diff --git a/include/spi.h b/include/spi.h
index 5b78271..ec17bd0 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -34,6 +34,7 @@
/* SPI TX operation modes */
#define SPI_OPM_TX_QPP (1 << 0)
+#define SPI_OPM_TX_BP (1 << 1)
/* SPI RX operation modes */
#define SPI_OPM_RX_AS (1 << 0)
--
1.9.1
More information about the U-Boot
mailing list