[U-Boot] Build problem with crownbay

[Bin Meng]

Hi Simon,

On Mon, Dec 15, 2014 at 8:23 AM, Simon Glass <sjg at chromium.org> wrote:
> Hi Bin,
>
> On 14 December 2014 at 08:44, Simon Glass <sjg at chromium.org> wrote:
>> Hi Bin,
>>
>> On 14 December 2014 at 08:09, Bin Meng <bmeng.cn at gmail.com> wrote:
>>> Hi Simon,
>>>
>>> On Sun, Dec 14, 2014 at 1:35 PM, Simon Glass <sjg at chromium.org> wrote:
>>>> Hi Bin,
>>>>
>>>> I see the following problem when trying to build crownbay:
>>>>
>>>> ./tools/buildman/buildman crownbay -se
>>>> boards.cfg is up to date. Nothing to do.
>>>> Summary of current source for 1 boards (1 thread, 32 jobs per thread)
>>>>        x86: +   crownbay
>>>> +{standard input}: Assembler messages:
>>>> +{standard input}:136: Error: can't open M0220661105.inc for reading:
>>>> No such file or directory
>>>> +make[3]: *** [arch/x86/cpu/queensbay/tnc_car.o] Error 1
>>>> +make[2]: *** [arch/x86/cpu/queensbay] Error 2
>>>> +make[1]: *** [arch/x86/cpu] Error 2
>>>> +make: *** [sub-make] Error 2
>>>>
>>>> Can you please take a look?
>>>>
>>>> I have pushed the test code to u-boot-x86/testing.
>>>
>>> I am not familiar with the buildman. I switched to the
>>> u-boot-x86/testing branch and did the same command as you:
>>>
>>> $ ./tools/buildman/buildman crownbay -se
>>> WARNING: no status info for 'beagle_x15'
>>> WARNING: no maintainers for 'beagle_x15'
>>> WARNING: no status info for 'stv0991'
>>> WARNING: no maintainers for 'stv0991'
>>> WARNING: no status info for 'socfpga_socrates'
>>> WARNING: no maintainers for 'socfpga_socrates'
>>> Summary of current source for 1 boards (1 thread, 24 jobs per thread)
>>> (no errors to report)
>>
>> In order to build (rather than summarise results) take off the -se.
>>
>>>
>>> My ~/.buildman is as follows:
>>>
>>> $ cat ~/.buildman
>>> [toolchain]
>>> root: /
>>>
>>> [toolchain-alias]
>>> x86: i386
>>>
>>> [make-flags]
>>>
>>> I did a u-boot.rom build for crownbay from the u-boot root directory
>>> and it builds fine.
>>>
>>> Based on the error message you gave, it looks like buildman is trying
>>> to cd into the 'arch/x86/cpu/queensbay/' directory and build it from
>>> there? What exact command build is using? The error message is related
>>> to tnc_car.S line#126
>>>
>>> 125 ucode_start:
>>> 126         .include "arch/x86/cpu/queensbay/M0220661105.inc"
>>> 127 ucode_size = ( . - ucode_start)
>>>
>>> So if the build is started from 'arch/x86/cpu/queensbay directory',
>>> the build will fail. But if started from u-boot root directory, there
>>> will be no problem.
>>
>> Well buildman just uses the normal build system. If you need to
>> include files then they will have to go either in the same directory
>> or in the include/asm/arch directory.
>>
>> Are you using a cross-compiler? Are you using an in-tree build? How do
>> you build it>
>>
>> I'm going to apply what I can from this series but we need to figure
>> this one out.
>
> I had a bit of a look. The root cause is having to include an assembly
> language include in a format I'm not really that keen on anyway. So I
> have sent a series that should avoid needing that. Please take a look.

Yes, I will have a look.

Regards,
Bin