[U-Boot] [PATCH 22/26] mpc8260: remove gw8260 board support
Masahiro Yamada
yamada.m at jp.panasonic.com
Mon Dec 15 15:26:27 CET 2014
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
Cc: Oliver Brown <obrown at adventnetworks.com>
---
arch/powerpc/cpu/mpc8260/Kconfig | 4 -
board/gw8260/Kconfig | 9 -
board/gw8260/MAINTAINERS | 6 -
board/gw8260/Makefile | 8 -
board/gw8260/flash.c | 502 ------------------------
board/gw8260/gw8260.c | 639 -------------------------------
configs/gw8260_defconfig | 3 -
doc/README.scrapyard | 1 +
include/configs/gw8260.h | 800 ---------------------------------------
9 files changed, 1 insertion(+), 1971 deletions(-)
delete mode 100644 board/gw8260/Kconfig
delete mode 100644 board/gw8260/MAINTAINERS
delete mode 100644 board/gw8260/Makefile
delete mode 100644 board/gw8260/flash.c
delete mode 100644 board/gw8260/gw8260.c
delete mode 100644 configs/gw8260_defconfig
delete mode 100644 include/configs/gw8260.h
diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 56b79ac..59e2bed 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -19,9 +19,6 @@ config TARGET_CPU87
config TARGET_EP82XXM
bool "Support ep82xxm"
-config TARGET_GW8260
- bool "Support gw8260"
-
config TARGET_KM82XX
bool "Support km82xx"
@@ -31,7 +28,6 @@ source "board/atc/Kconfig"
source "board/cpu86/Kconfig"
source "board/cpu87/Kconfig"
source "board/ep82xxm/Kconfig"
-source "board/gw8260/Kconfig"
source "board/keymile/km82xx/Kconfig"
endmenu
diff --git a/board/gw8260/Kconfig b/board/gw8260/Kconfig
deleted file mode 100644
index 1d6aa80..0000000
--- a/board/gw8260/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_GW8260
-
-config SYS_BOARD
- default "gw8260"
-
-config SYS_CONFIG_NAME
- default "gw8260"
-
-endif
diff --git a/board/gw8260/MAINTAINERS b/board/gw8260/MAINTAINERS
deleted file mode 100644
index 5268d19..0000000
--- a/board/gw8260/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-GW8260 BOARD
-M: Oliver Brown <obrown at adventnetworks.com>
-S: Maintained
-F: board/gw8260/
-F: include/configs/gw8260.h
-F: configs/gw8260_defconfig
diff --git a/board/gw8260/Makefile b/board/gw8260/Makefile
deleted file mode 100644
index 2e23f39..0000000
--- a/board/gw8260/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := gw8260.o flash.o
diff --git a/board/gw8260/flash.c b/board/gw8260/flash.c
deleted file mode 100644
index 0c4a943..0000000
--- a/board/gw8260/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2000
- * Marius Groeger <mgroeger at sysgo.de>
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- *
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Oliver Brown <oliverb at alumni.utexas.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*********************************************************************/
-/* DESCRIPTION:
- * This file contains the flash routines for the GW8260 board.
- *
- *
- *
- * MODULE DEPENDENCY:
- * None
- *
- *
- * RESTRICTIONS/LIMITATIONS:
- *
- * Only supports the following flash devices:
- * AMD 29F080B
- * AMD 29F016D
- *
- * Copyright (c) 2001, Advent Networks, Inc.
- *
- */
-/*********************************************************************/
-
-#include <common.h>
-#include <mpc8260.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*********************************************************************/
-/* functions */
-/*********************************************************************/
-
-/*
- * NAME: flash_init() - initializes flash banks
- *
- * DESCRIPTION:
- * This function initializes the flash bank(s).
- *
- * RETURNS:
- * The size in bytes of the flash
- *
- * RESTRICTIONS/LIMITATIONS:
- *
- *
- */
-unsigned long flash_init(void)
-{
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- /* for now, only support the 4 MB Flash SIMM */
- (void)flash_get_size((vu_long *) CONFIG_SYS_FLASH0_BASE,
- &flash_info[0]);
- /*
- * protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-#ifndef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#endif
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
- return CONFIG_SYS_FLASH0_SIZE * 1024 * 1024; /*size */
-}
-
-/*********************************************************************/
-/* NAME: flash_print_info() - prints flash imformation */
-/* */
-/* DESCRIPTION: */
-/* This function prints the flash information. */
-/* */
-/* INPUTS: */
-/* flash_info_t *info - flash information structure */
-/* */
-/* OUTPUTS: */
-/* Displays flash information to console */
-/* */
-/* RETURNS: */
-/* None */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/* */
-/*********************************************************************/
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch ((info->flash_id >> 16) & 0xff) {
- case 0x1:
- printf ("AMD ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case AMD_ID_F040B:
- printf ("AM29F040B (4 Mbit)\n");
- break;
- case AMD_ID_F080B:
- printf ("AM29F080B (8 Mbit)\n");
- break;
- case AMD_ID_F016D:
- printf ("AM29F016D (16 Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*********************************************************************/
-/* The following code cannot be run from FLASH! */
-/*********************************************************************/
-
-/*********************************************************************/
-/* NAME: flash_get_size() - detects the flash size */
-/* */
-/* DESCRIPTION: */
-/* 1) Reads vendor ID and devices ID from the flash devices. */
-/* 2) Initializes flash info struct. */
-/* 3) Return the flash size */
-/* */
-/* INPUTS: */
-/* vu_long *addr - pointer to start of flash */
-/* flash_info_t *info - flash information structure */
-/* */
-/* OUTPUTS: */
-/* None */
-/* */
-/* RETURNS: */
-/* Size of the flash in bytes, or 0 if device id is unknown. */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* Only supports the following devices: */
-/* AM29F080D */
-/* AM29F016D */
-/* */
-/*********************************************************************/
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- vu_long vendor, devid;
- ulong base = (ulong)addr;
-
- /*printf("addr = %08lx\n", (unsigned long)addr); */
-
- /* Reset and Write auto select command: read Manufacturer ID */
- addr[0x0000] = 0xf0f0f0f0;
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0x90909090;
- udelay (1000);
-
- vendor = addr[0];
- /*printf("vendor = %08lx\n", vendor); */
- if (vendor != 0x01010101) {
- info->size = 0;
- goto out;
- }
-
- devid = addr[1];
- /*printf("devid = %08lx\n", devid); */
-
- if ((devid & 0xff) == AMD_ID_F080B) {
- info->flash_id = (vendor & 0xff) << 16 | AMD_ID_F080B;
- /* we have 16 sectors with 64KB each x 4 */
- info->sector_count = 16;
- info->size = 4 * info->sector_count * 64*1024;
- } else if ((devid & 0xff) == AMD_ID_F016D){
- info->flash_id = (vendor & 0xff) << 16 | AMD_ID_F016D;
- /* we have 32 sectors with 64KB each x 4 */
- info->sector_count = 32;
- info->size = 4 * info->sector_count * 64*1024;
- } else {
- info->size = 0;
- goto out;
- }
- /*printf("sector count = %08x\n", info->sector_count); */
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* sector base address */
- info->start[i] = base + i * (info->size / info->sector_count);
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /* reset command */
- addr = (vu_long *)info->start[0];
-
- out:
- addr[0] = 0xf0f0f0f0;
-
- /*printf("size = %08x\n", info->size); */
- return info->size;
-}
-
-/*********************************************************************/
-/* NAME: flash_erase() - erases flash by sector */
-/* */
-/* DESCRIPTION: */
-/* This function erases flash sectors starting for s_first to */
-/* s_last. */
-/* */
-/* INPUTS: */
-/* flash_info_t *info - flash information structure */
-/* int s_first - first sector to erase */
-/* int s_last - last sector to erase */
-/* */
-/* OUTPUTS: */
-/* None */
-/* */
-/* RETURNS: */
-/* Returns 0 for success, 1 for failure. */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/*********************************************************************/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0x80808080;
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- udelay (100);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x30303030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x80808080) != 0x80808080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0xF0F0F0F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*********************************************************************/
-/* NAME: write_buff() - writes a buffer to flash */
-/* */
-/* DESCRIPTION: */
-/* This function copies a buffer, *src, to flash. */
-/* */
-/* INPUTS: */
-/* flash_info_t *info - flash information structure */
-/* uchar *src - pointer to buffer to write to flash */
-/* ulong addr - address to start write at */
-/* ulong cnt - number of bytes to write to flash */
-/* */
-/* OUTPUTS: */
-/* None */
-/* */
-/* RETURNS: */
-/* 0 - OK */
-/* 1 - write timeout */
-/* 2 - Flash not erased */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/*********************************************************************/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; (i < 4) && (cnt > 0); ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; (cnt == 0) && (i < 4); ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; (i < 4) && (cnt > 0); ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; (i < 4); ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*********************************************************************/
-/* NAME: write_word() - writes a word to flash */
-/* */
-/* DESCRIPTION: */
-/* This writes a single word to flash. */
-/* */
-/* INPUTS: */
-/* flash_info_t *info - flash information structure */
-/* ulong dest - address to write */
-/* ulong data - data to write */
-/* */
-/* OUTPUTS: */
-/* None */
-/* */
-/* RETURNS: */
-/* 0 - OK */
-/* 1 - write timeout */
-/* 2 - Flash not erased */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/*********************************************************************/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0xA0A0A0A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-/*********************************************************************/
-/* End of flash.c */
-/*********************************************************************/
diff --git a/board/gw8260/gw8260.c b/board/gw8260/gw8260.c
deleted file mode 100644
index bbae0a8..0000000
--- a/board/gw8260/gw8260.c
+++ /dev/null
@@ -1,639 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Jay Monkman <jtm at smoothsmoothie.com>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Oliver Brown <oliverb at alumni.utexas.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*********************************************************************/
-/* DESCRIPTION:
- * This file contains the board routines for the GW8260 board.
- *
- * MODULE DEPENDENCY:
- * None
- *
- * RESTRICTIONS/LIMITATIONS:
- * None
- *
- * Copyright (c) 2001, Advent Networks, Inc.
- */
-/*********************************************************************/
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-/*
- * I/O Port configuration table
- *
- */
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* TP14 */
- /* PA30 */ { 1, 1, 1, 1, 0, 0 }, /* US_RTS */
- /* PA29 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_DATA */
- /* PA28 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_CLK */
- /* PA27 */ { 1, 0, 0, 1, 0, 0 }, /* TP12 */
- /* PA26 */ { 1, 0, 0, 0, 0, 0 }, /* IO_STATUS */
- /* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CLOCK */
- /* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CONFIG */
- /* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DONE */
- /* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DATA */
- /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD3 */
- /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD2 */
- /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD1 */
- /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD0 */
- /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD0 */
- /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD1 */
- /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD2 */
- /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD3 */
- /* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE7 */
- /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE6 */
- /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE5 */
- /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE4 */
- /* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE3 */
- /* PA8 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE2 */
- /* PA7 */ { 1, 0, 0, 0, 0, 0 }, /* LSSI_IN */
- /* PA6 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE0 */
- /* PA5 */ { 1, 0, 0, 1, 0, 0 }, /* DEMOD_RESET_ */
- /* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* MOD_RESET_ */
- /* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* IO_RESET */
- /* PA2 */ { 1, 0, 0, 1, 0, 0 }, /* TX_ENABLE */
- /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* RX_LOCK */
- /* PA0 */ { 1, 0, 0, 1, 0, 1 } /* MPC_RESET_ */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TX_ER */
- /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_DV */
- /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FETH0_TX_EN */
- /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_ER */
- /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_COL */
- /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_CRS */
- /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD3 */
- /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD2 */
- /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD1 */
- /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD0 */
- /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD0 */
- /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD1 */
- /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD2 */
- /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD3 */
- /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_DV */
- /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_ER */
- /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_ER */
- /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_EN */
- /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_COL */
- /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_CRS */
- /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD3 */
- /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD2 */
- /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD1 */
- /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD0 */
- /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD0 */
- /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD1 */
- /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD2 */
- /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD3 */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_RESET_ */
- /* PC30 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_PAUSE_ */
- /* PC29 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW1 */
- /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW0 */
- /* PC27 */ { 1, 0, 0, 1, 0, 0 }, /* TP13 */
- /* PC26 */ { 1, 0, 0, 0, 0, 0 }, /* RXDECDFLG */
- /* PC25 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFAIL */
- /* PC24 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFLG */
- /* PC23 */ { 1, 0, 0, 1, 0, 0 }, /* WD_TCL */
- /* PC22 */ { 1, 0, 0, 1, 0, 0 }, /* WD_EN */
- /* PC21 */ { 1, 0, 0, 1, 0, 0 }, /* US_TXCLK */
- /* PC20 */ { 1, 0, 0, 0, 0, 0 }, /* DS_RXCLK */
- /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_CLK */
- /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_TX_CLK */
- /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_CLK */
- /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_TX_CLK */
- /* PC15 */ { 1, 0, 0, 1, 0, 0 }, /* TX_SHUTDOWN_ */
- /* PC14 */ { 1, 0, 0, 0, 0, 0 }, /* RS_232_DTR_ */
- /* PC13 */ { 1, 0, 0, 0, 0, 0 }, /* TXERR */
- /* PC12 */ { 1, 0, 0, 1, 0, 1 }, /* FETH1_MDDIS */
- /* PC11 */ { 1, 0, 0, 1, 0, 1 }, /* FETH0_MDDIS */
- /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */
- /* PC9 */ { 1, 0, 0, 1, 1, 1 }, /* MDIO */
- /* PC8 */ { 1, 0, 0, 1, 1, 1 }, /* SER_NUM */
- /* PC7 */ { 1, 1, 0, 0, 0, 0 }, /* US_CTS */
- /* PC6 */ { 1, 1, 0, 0, 0, 0 }, /* DS_CD_ */
- /* PC5 */ { 1, 0, 0, 1, 0, 0 }, /* FETH1_PWRDWN */
- /* PC4 */ { 1, 0, 0, 1, 0, 0 }, /* FETH0_PWRDWN */
- /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED3 */
- /* PC2 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED2 */
- /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED1 */
- /* PC0 */ { 1, 0, 0, 1, 0, 1 }, /* MPULED0 */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD30 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD29 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD28 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD27 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD26 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD25 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD24 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD23 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD22 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD21 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD20 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
- /* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
- /* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
- /* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
- /* PD15 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SDA */
- /* PD14 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SCL */
- /* PD13 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED7 */
- /* PD12 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED6 */
- /* PD11 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED5 */
- /* PD10 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED4 */
- /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* RS232_TXD */
- /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* RD232_RXD */
- /* PD7 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD6 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD5 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD4 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-
-/*********************************************************************/
-/* NAME: checkboard() - Displays the board type and serial number */
-/* */
-/* OUTPUTS: */
-/* Displays the board type and serial number */
-/* */
-/* RETURNS: */
-/* Always returns 1 */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/* */
-/*********************************************************************/
-int checkboard (void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: Advent Networks gw8260\n");
-
- if (i > 0) {
- printf("SN: %s\n", buf);
- }
- return 0;
-}
-
-
-#if defined (CONFIG_SYS_DRAM_TEST)
-/*********************************************************************/
-/* NAME: move64() - moves a double word (64-bit) */
-/* */
-/* DESCRIPTION: */
-/* this function performs a double word move from the data at */
-/* the source pointer to the location at the destination pointer. */
-/* */
-/* INPUTS: */
-/* unsigned long long *src - pointer to data to move */
-/* */
-/* OUTPUTS: */
-/* unsigned long long *dest - pointer to locate to move data */
-/* */
-/* RETURNS: */
-/* None */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* May cloober fr0. */
-/* */
-/*********************************************************************/
-static void move64 (unsigned long long *src, unsigned long long *dest)
-{
- asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
- "stfd 0, 0(4)" /* *dest = fpr0 */
- : : : "fr0"); /* Clobbers fr0 */
- return;
-}
-
-
-#if defined (CONFIG_SYS_DRAM_TEST_DATA)
-
-unsigned long long pattern[] = {
- 0xaaaaaaaaaaaaaaaaULL,
- 0xccccccccccccccccULL,
- 0xf0f0f0f0f0f0f0f0ULL,
- 0xff00ff00ff00ff00ULL,
- 0xffff0000ffff0000ULL,
- 0xffffffff00000000ULL,
- 0x00000000ffffffffULL,
- 0x0000ffff0000ffffULL,
- 0x00ff00ff00ff00ffULL,
- 0x0f0f0f0f0f0f0f0fULL,
- 0x3333333333333333ULL,
- 0x5555555555555555ULL,
-};
-
-/*********************************************************************/
-/* NAME: mem_test_data() - test data lines for shorts and opens */
-/* */
-/* DESCRIPTION: */
-/* Tests data lines for shorts and opens by forcing adjacent data */
-/* to opposite states. Because the data lines could be routed in */
-/* an arbitrary manner the must ensure test patterns ensure that */
-/* every case is tested. By using the following series of binary */
-/* patterns every combination of adjacent bits is test regardless */
-/* of routing. */
-/* */
-/* ...101010101010101010101010 */
-/* ...110011001100110011001100 */
-/* ...111100001111000011110000 */
-/* ...111111110000000011111111 */
-/* */
-/* Carrying this out, gives us six hex patterns as follows: */
-/* */
-/* 0xaaaaaaaaaaaaaaaa */
-/* 0xcccccccccccccccc */
-/* 0xf0f0f0f0f0f0f0f0 */
-/* 0xff00ff00ff00ff00 */
-/* 0xffff0000ffff0000 */
-/* 0xffffffff00000000 */
-/* */
-/* The number test patterns will always be given by: */
-/* */
-/* log(base 2)(number data bits) = log2 (64) = 6 */
-/* */
-/* To test for short and opens to other signals on our boards. we */
-/* simply */
-/* test with the 1's complemnt of the paterns as well. */
-/* */
-/* OUTPUTS: */
-/* Displays failing test pattern */
-/* */
-/* RETURNS: */
-/* 0 - Passed test */
-/* 1 - Failed test */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* Assumes only one one SDRAM bank */
-/* */
-/*********************************************************************/
-int mem_test_data (void)
-{
- unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_SDRAM_BASE;
- unsigned long long temp64 = 0;
- int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
- int i;
- unsigned int hi, lo;
-
- for (i = 0; i < num_patterns; i++) {
- move64 (&(pattern[i]), pmem);
- move64 (pmem, &temp64);
-
- /* hi = (temp64>>32) & 0xffffffff; */
- /* lo = temp64 & 0xffffffff; */
- /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
-
- hi = (pattern[i] >> 32) & 0xffffffff;
- lo = pattern[i] & 0xffffffff;
- /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
-
- if (temp64 != pattern[i]) {
- printf ("\n Data Test Failed, pattern 0x%08x%08x",
- hi, lo);
- return 1;
- }
- }
-
- return 0;
-}
-#endif /* CONFIG_SYS_DRAM_TEST_DATA */
-
-#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
-/*********************************************************************/
-/* NAME: mem_test_address() - test address lines */
-/* */
-/* DESCRIPTION: */
-/* This function performs a test to verify that each word im */
-/* memory is uniquly addressable. The test sequence is as follows: */
-/* */
-/* 1) write the address of each word to each word. */
-/* 2) verify that each location equals its address */
-/* */
-/* OUTPUTS: */
-/* Displays failing test pattern and address */
-/* */
-/* RETURNS: */
-/* 0 - Passed test */
-/* 1 - Failed test */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/* */
-/*********************************************************************/
-int mem_test_address (void)
-{
- volatile unsigned int *pmem =
- (volatile unsigned int *) CONFIG_SYS_SDRAM_BASE;
- const unsigned int size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 4;
- unsigned int i;
-
- /* write address to each location */
- for (i = 0; i < size; i++) {
- pmem[i] = i;
- }
-
- /* verify each loaction */
- for (i = 0; i < size; i++) {
- if (pmem[i] != i) {
- printf ("\n Address Test Failed at 0x%x", i);
- return 1;
- }
- }
- return 0;
-}
-#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
-
-#if defined (CONFIG_SYS_DRAM_TEST_WALK)
-/*********************************************************************/
-/* NAME: mem_march() - memory march */
-/* */
-/* DESCRIPTION: */
-/* Marches up through memory. At each location verifies rmask if */
-/* read = 1. At each location write wmask if write = 1. Displays */
-/* failing address and pattern. */
-/* */
-/* INPUTS: */
-/* volatile unsigned long long * base - start address of test */
-/* unsigned int size - number of dwords(64-bit) to test */
-/* unsigned long long rmask - read verify mask */
-/* unsigned long long wmask - wrtie verify mask */
-/* short read - verifies rmask if read = 1 */
-/* short write - writes wmask if write = 1 */
-/* */
-/* OUTPUTS: */
-/* Displays failing test pattern and address */
-/* */
-/* RETURNS: */
-/* 0 - Passed test */
-/* 1 - Failed test */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/* */
-/*********************************************************************/
-int mem_march (volatile unsigned long long *base,
- unsigned int size,
- unsigned long long rmask,
- unsigned long long wmask, short read, short write)
-{
- unsigned int i;
- unsigned long long temp = 0;
- unsigned int hitemp, lotemp, himask, lomask;
-
- for (i = 0; i < size; i++) {
- if (read != 0) {
- /* temp = base[i]; */
- move64 ((unsigned long long *) &(base[i]), &temp);
- if (rmask != temp) {
- hitemp = (temp >> 32) & 0xffffffff;
- lotemp = temp & 0xffffffff;
- himask = (rmask >> 32) & 0xffffffff;
- lomask = rmask & 0xffffffff;
-
- printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
- return 1;
- }
- }
- if (write != 0) {
- /* base[i] = wmask; */
- move64 (&wmask, (unsigned long long *) &(base[i]));
- }
- }
- return 0;
-}
-#endif /* CONFIG_SYS_DRAM_TEST_WALK */
-
-/*********************************************************************/
-/* NAME: mem_test_walk() - a simple walking ones test */
-/* */
-/* DESCRIPTION: */
-/* Performs a walking ones through entire physical memory. The */
-/* test uses as series of memory marches, mem_march(), to verify */
-/* and write the test patterns to memory. The test sequence is as */
-/* follows: */
-/* 1) march writing 0000...0001 */
-/* 2) march verifying 0000...0001 , writing 0000...0010 */
-/* 3) repeat step 2 shifting masks left 1 bit each time unitl */
-/* the write mask equals 1000...0000 */
-/* 4) march verifying 1000...0000 */
-/* The test fails if any of the memory marches return a failure. */
-/* */
-/* OUTPUTS: */
-/* Displays which pass on the memory test is executing */
-/* */
-/* RETURNS: */
-/* 0 - Passed test */
-/* 1 - Failed test */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/* */
-/*********************************************************************/
-int mem_test_walk (void)
-{
- unsigned long long mask;
- volatile unsigned long long *pmem =
- (volatile unsigned long long *) CONFIG_SYS_SDRAM_BASE;
- const unsigned long size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 8;
-
- unsigned int i;
-
- mask = 0x01;
-
- printf ("Initial Pass");
- mem_march (pmem, size, 0x0, 0x1, 0, 1);
-
- printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
- printf (" ");
- printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-
- for (i = 0; i < 63; i++) {
- printf ("Pass %2d", i + 2);
- if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
- /*printf("mask: 0x%x, pass: %d, ", mask, i); */
- return 1;
- }
- mask = mask << 1;
- printf ("\b\b\b\b\b\b\b");
- }
-
- printf ("Last Pass");
- if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
- /* printf("mask: 0x%x", mask); */
- return 1;
- }
- printf ("\b\b\b\b\b\b\b\b\b");
- printf (" ");
- printf ("\b\b\b\b\b\b\b\b\b");
-
- return 0;
-}
-
-/*********************************************************************/
-/* NAME: testdram() - calls any enabled memory tests */
-/* */
-/* DESCRIPTION: */
-/* Runs memory tests if the environment test variables are set to */
-/* 'y'. */
-/* */
-/* INPUTS: */
-/* testdramdata - If set to 'y', data test is run. */
-/* testdramaddress - If set to 'y', address test is run. */
-/* testdramwalk - If set to 'y', walking ones test is run */
-/* */
-/* OUTPUTS: */
-/* None */
-/* */
-/* RETURNS: */
-/* 0 - Passed test */
-/* 1 - Failed test */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/* */
-/*********************************************************************/
-int testdram (void)
-{
- int rundata, runaddress, runwalk;
-
- rundata = getenv_yesno("testdramdata") == 1;
- runaddress = getenv_yesno("testdramaddress") == 1;
- runwalk = getenv_yesno("testdramwalk") == 1;
-
- if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf ("Testing RAM ... ");
- }
-#ifdef CONFIG_SYS_DRAM_TEST_DATA
- if (rundata == 1) {
- if (mem_test_data () == 1) {
- return 1;
- }
- }
-#endif
-#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
- if (runaddress == 1) {
- if (mem_test_address () == 1) {
- return 1;
- }
- }
-#endif
-#ifdef CONFIG_SYS_DRAM_TEST_WALK
- if (runwalk == 1) {
- if (mem_test_walk () == 1) {
- return 1;
- }
- }
-#endif
- if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf ("passed");
- }
- return 0;
-
-}
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-/*********************************************************************/
-/* NAME: initdram() - initializes SDRAM controller */
-/* */
-/* DESCRIPTION: */
-/* Initializes the MPC8260's SDRAM controller. */
-/* */
-/* INPUTS: */
-/* CONFIG_SYS_IMMR - MPC8260 Internal memory map */
-/* CONFIG_SYS_SDRAM_BASE - Physical start address of SDRAM */
-/* CONFIG_SYS_PSDMR - SDRAM mode register */
-/* CONFIG_SYS_MPTPR - Memory refresh timer prescaler register */
-/* CONFIG_SYS_SDRAM0_SIZE - SDRAM size */
-/* */
-/* RETURNS: */
-/* SDRAM size in bytes */
-/* */
-/* RESTRICTIONS/LIMITATIONS: */
-/* */
-/* */
-/*********************************************************************/
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
- ulong psdmr = CONFIG_SYS_PSDMR;
- int i;
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++) {
- *ramaddr = c;
- }
- memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *ramaddr = c;
-
- /* return total ram size */
- return (CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024);
-}
-
-/*********************************************************************/
-/* End of gw8260.c */
-/*********************************************************************/
diff --git a/configs/gw8260_defconfig b/configs/gw8260_defconfig
deleted file mode 100644
index a59ec3a..0000000
--- a/configs/gw8260_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_GW8260=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index af4b00c..0c47ebd 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+gw8260 powerpc mpc8260 - - Oliver Brown <obrown at adventnetworks.com>
IPHASE4539 powerpc mpc8260 - - Wolfgang Grandegger <wg at denx.de>
muas3001 powerpc mpc8260 - - Heiko Schocher <hs at denx.de>
PM825 powerpc mpc8260 - - Wolfgang Denk <wd at denx.de>
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
deleted file mode 100644
index 262c9e9..0000000
--- a/include/configs/gw8260.h
+++ /dev/null
@@ -1,800 +0,0 @@
-/*
- * (C) Copyright 2000
- * Murray Jensen <Murray.Jensen at cmst.csiro.au>
- *
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Jay Monkman <jmonkman at adventnetworks.com>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Oliver Brown <obrown at adventnetworks.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*********************************************************************/
-/* DESCRIPTION:
- * This file contains the board configuartion for the GW8260 board.
- *
- * MODULE DEPENDENCY:
- * None
- *
- * RESTRICTIONS/LIMITATIONS:
- * None
- *
- * Copyright (c) 2001, Advent Networks, Inc.
- */
-/*********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-/* Enable debug prints */
-#undef DEBUG_BOOTP_EXT /* Debug received vendor fields */
-
-/* What is the oscillator's (UX2) frequency in Hz? */
-#define CONFIG_8260_CLKIN (66 * 1000 * 1000)
-
-/*-----------------------------------------------------------------------
- * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
- *-----------------------------------------------------------------------
- * What should MODCK_H be? It is dependent on the oscillator
- * frequency, MODCK[1-3], and desired CPM and core frequencies.
- * Here are some example values (all frequencies are in MHz):
- *
- * MODCK_H MODCK[1-3] Osc CPM Core S2-6 S2-7 S2-8
- * ------- ---------- --- --- ---- ----- ----- -----
- * 0x5 0x5 66 133 133 Open Close Open
- * 0x5 0x6 66 133 166 Open Open Close
- * 0x5 0x7 66 133 200 Open Open Open
- * 0x6 0x0 66 133 233 Close Close Close
- * 0x6 0x1 66 133 266 Close Close Open
- * 0x6 0x2 66 133 300 Close Open Close
- */
-#define CONFIG_SYS_SBC_MODCK_H 0x05
-
-/* Define this if you want to boot from 0x00000100. If you don't define
- * this, you will need to program the bootloader to 0xfff00000, and
- * get the hardware reset config words at 0xfe000000. The simplest
- * way to do that is to program the bootloader at both addresses.
- * It is suggested that you just let U-Boot live at 0x00000000.
- */
-#define CONFIG_SYS_SBC_BOOT_LOW 1
-
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE.
- * The main FLASH is whichever is connected to *CS0. U-Boot expects
- * this to be the SIMM.
- */
-#define CONFIG_SYS_FLASH0_BASE 0x40000000
-#define CONFIG_SYS_FLASH0_SIZE 8
-
-/* Define CONFIG_SYS_FLASH_CHECKSUM to enable flash checksum during boot.
- * Note: the 'flashchecksum' environment variable must also be set to 'y'.
- */
-#define CONFIG_SYS_FLASH_CHECKSUM
-
-/* What should be the base address of SDRAM DIMM and how big is
- * it (in Mbytes)?
- */
-#define CONFIG_SYS_SDRAM0_BASE 0x00000000
-#define CONFIG_SYS_SDRAM0_SIZE 64
-
-/*
- * DRAM tests
- * CONFIG_SYS_DRAM_TEST - enables the following tests.
- *
- * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
- * Environment variable 'test_dram_data' must be
- * set to 'y'.
- * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
- * addressable. Environment variable
- * 'test_dram_address' must be set to 'y'.
- * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- * This test takes about 6 minutes to test 64 MB.
- * Environment variable 'test_dram_walk' must be
- * set to 'y'.
- */
-#define CONFIG_SYS_DRAM_TEST
-#if defined(CONFIG_SYS_DRAM_TEST)
-#define CONFIG_SYS_DRAM_TEST_DATA
-#define CONFIG_SYS_DRAM_TEST_ADDRESS
-#define CONFIG_SYS_DRAM_TEST_WALK
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-/*
- * GW8260 with 16 MB DIMM:
- *
- * 0x0000 0000 Exception Vector code, 8k
- * :
- * 0x0000 1FFF
- * 0x0000 2000 Free for Application Use
- * :
- * :
- *
- * :
- * :
- * 0x00F5 FF30 Monitor Stack (Growing downward)
- * Monitor Stack Buffer (0x80)
- * 0x00F5 FFB0 Board Info Data
- * 0x00F6 0000 Malloc Arena
- * : CONFIG_ENV_SECT_SIZE, 256k
- * : CONFIG_SYS_MALLOC_LEN, 128k
- * 0x00FC 0000 RAM Copy of Monitor Code
- * : CONFIG_SYS_MONITOR_LEN, 256k
- * 0x00FF FFFF [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
- */
-
-/*
- * GW8260 with 64 MB DIMM:
- *
- * 0x0000 0000 Exception Vector code, 8k
- * :
- * 0x0000 1FFF
- * 0x0000 2000 Free for Application Use
- * :
- * :
- *
- * :
- * :
- * 0x03F5 FF30 Monitor Stack (Growing downward)
- * Monitor Stack Buffer (0x80)
- * 0x03F5 FFB0 Board Info Data
- * 0x03F6 0000 Malloc Arena
- * : CONFIG_ENV_SECT_SIZE, 256k
- * : CONFIG_SYS_MALLOC_LEN, 128k
- * 0x03FC 0000 RAM Copy of Monitor Code
- * : CONFIG_SYS_MONITOR_LEN, 256k
- * 0x03FF FFFF [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
- */
-
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere.
- */
-#define CONFIG_CONS_ON_SMC 1 /* define if console on SMC */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on neither */
-#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-
-#undef CONFIG_ETHER_ON_SCC
-#define CONFIG_ETHER_ON_FCC
-#undef CONFIG_ETHER_NONE /* define if ethernet on neither */
-
-#ifdef CONFIG_ETHER_ON_SCC
-#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
-#endif /* CONFIG_ETHER_ON_SCC */
-
-#ifdef CONFIG_ETHER_ON_FCC
-#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
-/*
- * Port pins used for bit-banged MII communictions (if applicable).
- */
-#define MDIO_PORT 2 /* Port C */
-
-#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE MDIO_DECLARE
-
-#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
-#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
-#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
-
-#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
- else iop->pdat &= ~0x00200000
-
-#define MIIDELAY udelay(1)
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
-
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - Select bus for bd/buffers (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
-
-/* Define this to reserve an entire FLASH sector (256 KB) for
- * environment variables. Otherwise, the environment will be
- * put in the same sector as U-Boot, and changing variables
- * will erase U-Boot temporarily
- */
-#define CONFIG_ENV_IN_OWN_SECT
-
-/* Define to allow the user to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* What should the console's baud rate be? */
-#define CONFIG_BAUDRATE 115200
-
-/* Ethernet MAC address - This is set to all zeros to force an
- * an error if we use BOOTP without setting
- * the MAC address
- */
-#define CONFIG_ETHADDR 00:00:00:00:00:00
-
-/* Set to a positive value to delay for running BOOTCOMMAND */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-/* Be selective on what keys can delay or stop the autoboot process
- * To stop use: " "
- */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
- "Autobooting in %d seconds, press \" \" to stop\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR " "
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define DEBUG_BOOTKEYS 0
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_DNS
-
-/* undef this to save memory */
-#define CONFIG_SYS_LONGHELP
-
-/* Monitor Command Prompt */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-
-#undef CONFIG_CMD_KGDB
-
-
-/* Where do the internal registers live? */
-#define CONFIG_SYS_IMMR 0xf0000000
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#endif
-
-/* What is the address of IO controller */
-#define CONFIG_SYS_IO_BASE 0xe0000000
-
-/*****************************************************************************
- *
- * You should not have to modify any of the following settings
- *
- *****************************************************************************/
-
-#define CONFIG_GW8260 1 /* on an GW8260 Board */
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-/*
- * Miscellaneous configurable options
- */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
-
-#define CONFIG_SYS_MAXARGS 8 /* max number of command args */
-
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/* Convert clocks to MHZ when passing board info to kernel.
- * This must be defined for eariler 2.4 kernels (~2.4.4).
- */
-#define CONFIG_CLOCKS_IN_MHZ
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-
-/* memtest works from the end of the exception vector table
- * to the end of the DRAM less monitor and malloc area
- */
-#define CONFIG_SYS_MEMTEST_START 0x2000
-
-#define CONFIG_SYS_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */
-
-#define CONFIG_SYS_MEM_END_USAGE ( CONFIG_SYS_MONITOR_LEN \
- + CONFIG_SYS_MALLOC_LEN \
- + CONFIG_ENV_SECT_SIZE \
- + CONFIG_SYS_STACK_USAGE )
-
-#define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
- - CONFIG_SYS_MEM_END_USAGE )
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM0_BASE
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM0_SIZE
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- */
-#if defined(CONFIG_SYS_SBC_BOOT_LOW)
-# define CONFIG_SYS_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS)
-#else
-# define CONFIG_SYS_SBC_HRCW_BOOT_FLAGS (0)
-#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
-
-/* get the HRCW ISB field from CONFIG_SYS_IMMR */
-#define CONFIG_SYS_SBC_HRCW_IMMR ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \
- ((CONFIG_SYS_IMMR & 0x01000000) >> 7) | \
- ((CONFIG_SYS_IMMR & 0x00100000) >> 4) )
-
-#define CONFIG_SYS_HRCW_MASTER ( HRCW_BPS11 | \
- HRCW_DPPC11 | \
- CONFIG_SYS_SBC_HRCW_IMMR | \
- HRCW_MMR00 | \
- HRCW_LBPC11 | \
- HRCW_APPC10 | \
- HRCW_CS10PC00 | \
- (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111) | \
- CONFIG_SYS_SBC_HRCW_BOOT_FLAGS )
-
-/* no slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
- */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH0_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#ifdef CONFIG_ENV_IN_OWN_SECT
-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + (256 * 1024))
-# define CONFIG_ENV_SECT_SIZE (256 * 1024)
-#else
-# define CONFIG_ENV_SIZE (16 * 1024)/* Size of Environment Sector */
-# define CONFIG_ENV_ADD ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - CONFIG_ENV_SIZE)
-# define CONFIG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size */
-#endif /* CONFIG_ENV_IN_OWN_SECT */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE |\
- HID0_DCE |\
- HID0_ICFI |\
- HID0_DCI |\
- HID0_IFEM |\
- HID0_ABE)
-
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE |\
- HID0_IFEM |\
- HID0_ABE |\
- HID0_EMCP)
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RMR 0
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR (BCR_ETM)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC11 |\
- SIUMCR_L2CPC00 |\
- SIUMCR_APPC10 |\
- SIUMCR_MMR00)
-
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC |\
- SYPCR_BMT |\
- SYPCR_PBME |\
- SYPCR_LBME |\
- SYPCR_SWRI |\
- SYPCR_SWP)
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC |\
- TMCNTSC_ALR |\
- TMCNTSC_TCF |\
- TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS |\
- PISCR_PTF |\
- PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SCCR 0
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Initialize Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 32 bit FLASH (SIMM - 4MB)
- * 1 60x GPCM 32 bit unused
- * 2 60x SDRAM 64 bit SDRAM (DIMM - 16MB or 64MB)
- * 3 60x SDRAM 64 bit unused
- * 4 Local GPCM 8 bit IO (on board - 64k)
- * 5 60x GPCM 8 bit unused
- * 6 60x GPCM 8 bit unused
- * 7 60x GPCM 8 bit unused
- *
- */
-
-/*-----------------------------------------------------------------------
- * BR0 - Base Register
- * Ref: Section 10.3.1 on page 10-14
- * OR0 - Option Register
- * Ref: Section 10.3.2 on page 10-18
- *-----------------------------------------------------------------------
- */
-
-/* Bank 0,1 - FLASH SIMM
- *
- * This expects the FLASH SIMM to be connected to *CS0
- * It consists of 4 AM29F016D parts.
- *
- * Note: For the 8 MB SIMM, *CS1 is unused.
- */
-
-/* BR0 is configured as follows:
- *
- * - Base address of 0x40000000
- * - 32 bit port size
- * - Data errors checking is disabled
- * - Read and write access
- * - GPCM 60x bus
- * - Access are handled by the memory controller according to MSEL
- * - Not used for atomic operations
- * - No data pipelining is done
- * - Valid
- */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-/* OR0 is configured as follows:
- *
- * - 8 MB
- * - *BCTL0 is asserted upon access to the current memory bank
- * - *CW / *WE are negated a quarter of a clock earlier
- * - *CS is output at the same time as the address lines
- * - Uses a clock cycle length of 5
- * - *PSDVAL is generated internally by the memory controller
- * unless *GTA is asserted earlier externally.
- * - Relaxed timing is generated by the GPCM for accesses
- * initiated to this memory region.
- * - One idle clock is inserted between a read access from the
- * current bank and the next access.
- */
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE) |\
- ORxG_CSNT |\
- ORxG_ACS_DIV1 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX |\
- ORxG_EHTR)
-
-/*-----------------------------------------------------------------------
- * BR2 - Base Register
- * Ref: Section 10.3.1 on page 10-14
- * OR2 - Option Register
- * Ref: Section 10.3.2 on page 10-16
- *-----------------------------------------------------------------------
- */
-
-/* Bank 2 - SDRAM DIMM
- *
- * 16MB DIMM: P/N
- * 64MB DIMM: P/N 1W-8864X8-4-P1-EST or
- * MT4LSDT864AG-10EB1 (Micron)
- *
- * Note: *CS3 is unused for this DIMM
- */
-
-/* With a 16 MB or 64 MB DIMM, the BR2 is configured as follows:
- *
- * - Base address of 0x00000000
- * - 64 bit port size (60x bus only)
- * - Data errors checking is disabled
- * - Read and write access
- * - SDRAM 60x bus
- * - Access are handled by the memory controller according to MSEL
- * - Not used for atomic operations
- * - No data pipelining is done
- * - Valid
- */
-#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_SDRAM_P |\
- BRx_V)
-
-/* With a 16 MB DIMM, the OR2 is configured as follows:
- *
- * - 16 MB
- * - 2 internal banks per device
- * - Row start address bit is A9 with PSDMR[PBI] = 0
- * - 11 row address lines
- * - Back-to-back page mode
- * - Internal bank interleaving within save device enabled
- */
-#if (CONFIG_SYS_SDRAM0_SIZE == 16)
-#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\
- ORxS_BPD_2 |\
- ORxS_ROWST_PBI0_A9 |\
- ORxS_NUMR_11)
-
-/* With a 16 MB DIMM, the PSDMR is configured as follows:
- *
- * - Page Based Interleaving,
- * - Refresh Enable,
- * - Address Multiplexing where A5 is output on A14 pin
- * (A6 on A15, and so on),
- * - use address pins A16-A18 as bank select,
- * - A9 is output on SDA10 during an ACTIVATE command,
- * - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
- * - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- * is 3 clocks,
- * - earliest timing for READ/WRITE command after ACTIVATE command is
- * 2 clocks,
- * - earliest timing for PRECHARGE after last data was read is 1 clock,
- * - earliest timing for PRECHARGE after last data was written is 1 clock,
- * - CAS Latency is 2.
- */
-
-/*-----------------------------------------------------------------------
- * PSDMR - 60x Bus SDRAM Mode Register
- * Ref: Section 10.3.3 on page 10-21
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PSDMR (PSDMR_RFEN |\
- PSDMR_SDAM_A14_IS_A5 |\
- PSDMR_BSMA_A16_A18 |\
- PSDMR_SDA10_PBI0_A9 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_3W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_1C |\
- PSDMR_CL_2)
-#endif /* (CONFIG_SYS_SDRAM0_SIZE == 16) */
-
-/* With a 64 MB DIMM, the OR2 is configured as follows:
- *
- * - 64 MB
- * - 4 internal banks per device
- * - Row start address bit is A8 with PSDMR[PBI] = 0
- * - 12 row address lines
- * - Back-to-back page mode
- * - Internal bank interleaving within save device enabled
- */
-#if (CONFIG_SYS_SDRAM0_SIZE == 64)
-#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI0_A8 |\
- ORxS_NUMR_12)
-
-/* With a 64 MB DIMM, the PSDMR is configured as follows:
- *
- * - Page Based Interleaving,
- * - Refresh Enable,
- * - Address Multiplexing where A5 is output on A14 pin
- * (A6 on A15, and so on),
- * - use address pins A14-A16 as bank select,
- * - A9 is output on SDA10 during an ACTIVATE command,
- * - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
- * - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- * is 3 clocks,
- * - earliest timing for READ/WRITE command after ACTIVATE command is
- * 2 clocks,
- * - earliest timing for PRECHARGE after last data was read is 1 clock,
- * - earliest timing for PRECHARGE after last data was written is 1 clock,
- * - CAS Latency is 2.
- */
-
-/*-----------------------------------------------------------------------
- * PSDMR - 60x Bus SDRAM Mode Register
- * Ref: Section 10.3.3 on page 10-21
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PSDMR (PSDMR_RFEN |\
- PSDMR_SDAM_A14_IS_A5 |\
- PSDMR_BSMA_A14_A16 |\
- PSDMR_SDA10_PBI0_A9 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_3W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_1C |\
- PSDMR_CL_2)
-#endif /* (CONFIG_SYS_SDRAM0_SIZE == 64) */
-
-#define CONFIG_SYS_PSRT 0x0e
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32
-
-
-/*-----------------------------------------------------------------------
- * BR4 - Base Register
- * Ref: Section 10.3.1 on page 10-14
- * OR4 - Option Register
- * Ref: Section 10.3.2 on page 10-18
- *-----------------------------------------------------------------------
- */
-/* Bank 4 - Onboard Memory Mapped IO controller
- *
- * This expects the onboard IO controller to connected to *CS4 and
- * the local bus.
- * - Base address of 0xe0000000
- * - 8 bit port size (local bus only)
- * - Read and write access
- * - GPCM local bus
- * - Not used for atomic operations
- * - No data pipelining is done
- * - Valid
- * - extended hold time
- * - 11 wait states
- */
-
-#ifdef CONFIG_SYS_IO_BASE
-# define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_IO_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_GPCM_L |\
- BRx_V)
-
-# define CONFIG_SYS_OR4_PRELIM (ORxG_AM_MSK |\
- ORxG_SCY_11_CLK |\
- ORxG_EHTR)
-#endif /* CONFIG_SYS_IO_BASE */
-#endif /* __CONFIG_H */
--
1.9.1
More information about the U-Boot
mailing list