[U-Boot] [PATCH v2 1/1] marvell: kirkwood: guruplug refresh for newer kernel

[drEagle]

Hi Prafulla,

Is it okay also for this patch which is a GuruPlug refresh for same config as the SheevaPlug one.

Regards,
Gérald

Le 19/12/2014 08:20, Gerald Kerma a écrit :
> Refresh for newer kernel.
> Prepare ENV settings for guruplugs to be OpenWRT ready.
> 
>     +----------+
>     | UBOOT    | >> 896 Kb (7x128)  = uboot
>     +----------+
>     | ENV      | >> 128 Kb          = uboot_env
>     +----------+
>     | ROOT(FS) | >> 511 Mb @ 1 Mb   = root -> rootfs (ubifs)
>     +----------+
> 
> With (CC) TRUNK OpenWRT build (QUICK HOWTO) :
> 
>     <INTERRUPT>
>     Marvell>> nand erase.part root
>     Marvell>> ubi part root
>     Marvell>> ubi remove rootfs
>     Marvell>> ubi create rootfs
>     Marvell>> usb start
>     Marvell>> fatload usb 2:1 0x800000 guruplug/openwrt/openwrt-kirkwood-guruplugserverplus-rootfs.ubifs
>     Marvell>> ubi write 0x800000 rootfs ${filesize}
>     Marvell>> reset
> 
> Changes in v2:
> - Fix commit comments
> 
> Changes in v1:
> - ADD generic board define
> - ADD FDT support
> - ADD HUSH interpreter
> - Define new NAND partition mapping
> 
> Signed-off-by: Gerald Kerma <dreagle at doukki.net>
> ---
>  include/configs/guruplug.h | 84 ++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 67 insertions(+), 17 deletions(-)
> 
> diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
> index a56a4cb..8e53af8 100644
> --- a/include/configs/guruplug.h
> +++ b/include/configs/guruplug.h
> @@ -1,5 +1,6 @@
>  /*
> - * (C) Copyright 2009
> + * (C) Copyright 2009-2014
> + * Gerald Kerma <dreagle at doukki.net>
>   * Marvell Semiconductor <www.marvell.com>
>   * Written-by: Siddarth Gore <gores at marvell.com>
>   *
> @@ -9,6 +10,8 @@
>  #ifndef _CONFIG_GURUPLUG_H
>  #define _CONFIG_GURUPLUG_H
>  
> +#define CONFIG_SYS_GENERIC_BOARD
> +
>  /*
>   * Version number information
>   */
> @@ -23,17 +26,36 @@
>  #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
>  
>  /*
> + * Compression configuration
> + */
> +#define CONFIG_BZIP2
> +#define CONFIG_LZMA
> +#define CONFIG_LZO
> +
> +/*
> + * Enable device tree support
> + */
> +#define CONFIG_OF_LIBFDT
> +
> +/*
> + * Miscellaneous configurable options
> + */
> +#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
> +
> +/*
>   * Commands configuration
>   */
>  #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
>  #include <config_cmd_default.h>
> +#define CONFIG_CMD_BOOTZ
>  #define CONFIG_CMD_DHCP
>  #define CONFIG_CMD_ENV
> -#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_IDE
> +#define CONFIG_CMD_MII
>  #define CONFIG_CMD_NAND
>  #define CONFIG_CMD_PING
>  #define CONFIG_CMD_USB
> -#define CONFIG_CMD_IDE
> +#define CONFIG_CMD_FAT
>  
>  /*
>   * mv-common.h should be defined after CMD configs since it used them
> @@ -55,24 +77,38 @@
>   * it has to be rounded to sector size
>   */
>  #define CONFIG_ENV_SIZE			0x20000	/* 128k */
> -#define CONFIG_ENV_ADDR			0x60000
> -#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
> +#define CONFIG_ENV_OFFSET		0xE0000	/* env starts here */
>  
>  /*
>   * Default environment variables
>   */
> -#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
> -	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
> -	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
> -	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
> -	"bootm 0x6400000;"
> -
> -#define CONFIG_EXTRA_ENV_SETTINGS	\
> -	"x_bootcmd_ethernet=ping 192.168.2.1\0"	\
> -	"x_bootcmd_usb=usb start\0"	\
> -	"x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
> -	"x_bootargs=console=ttyS0,115200\0"	\
> -	"x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
> +#define CONFIG_BOOTCOMMAND \
> +	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
> +	"ubi part root; "						\
> +	"ubifsmount ubi:rootfs; "					\
> +	"ubifsload 0x800000 ${kernel}; "				\
> +	"ubifsload 0x700000 ${fdt}; "					\
> +	"ubifsumount; "							\
> +	"fdt addr 0x700000; fdt resize; fdt chosen; "			\
> +	"bootz 0x800000 - 0x700000"
> +
> +#define CONFIG_MTDPARTS	\
> +	"mtdparts=orion_nand:"						\
> +	"896K(uboot),128K(uboot_env),"					\
> +	"- at 1M(root)\0"
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	"console=console=ttyS0,115200\0"				\
> +	"mtdids=nand0=orion_nand\0"					\
> +	"mtdparts="CONFIG_MTDPARTS					\
> +	"kernel=/boot/zImage\0"						\
> +	"fdt=/boot/guruplug-server-plus.dtb\0"				\
> +	"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
> +
> +#define MTDIDS_DEFAULT	"nand0=orion_nand"
> +
> +#define MTDPARTS_DEFAULT	\
> +	"mtdparts="CONFIG_MTDPARTS
>  
>  /*
>   * Ethernet Driver configuration
> @@ -89,6 +125,20 @@
>  #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
>  #endif /*CONFIG_MVSATA_IDE*/
>  
> +/*
> + * File system
> + */
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_JFFS2
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#define CONFIG_RBTREE
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> +#define CONFIG_CMD_MTDPARTS
> +
>  #define CONFIG_SYS_ALT_MEMTEST
>  
>  #endif /* _CONFIG_GURUPLUG_H */
>