[U-Boot] [PATCH 11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins

[Hans de Goede]

Add support for external DACs connected to the parallel LCD interface driving
a VGA connector, such as found on the Olimex A13 boards.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 board/sunxi/Kconfig           |  9 +++++++++
 drivers/video/sunxi_display.c | 14 ++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 7a8503b..3e42866 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -253,6 +253,15 @@ config VIDEO_HDMI
 	---help---
 	Say Y here to add support for outputting video over HDMI.
 
+config VIDEO_VGA_VIA_LCD
+	boolean "VGA via LCD controller support"
+	depends on VIDEO
+	default n
+	---help---
+	Say Y here to add support for external DACs connected to the parallel
+	LCD interface driving a VGA connector, such as found on the
+	Olimex A13 boards.
+
 config VIDEO_LCD_MODE
 	string "LCD panel timing details"
 	depends on VIDEO
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index 2822cc6..624e5e0 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -768,6 +768,12 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 		sunxi_lcdc_backlight_enable();
 		break;
 	case sunxi_monitor_vga:
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD
+		sunxi_composer_mode_set(mode, address);
+		sunxi_lcdc_tcon0_mode_set(mode);
+		sunxi_composer_enable();
+		sunxi_lcdc_enable();
+#endif
 		break;
 	}
 }
@@ -798,6 +804,8 @@ void *video_hw_init(void)
 	hpd = video_get_option_int(options, "hpd", 1);
 	edid = video_get_option_int(options, "edid", 1);
 	sunxi_display.monitor = sunxi_monitor_dvi;
+#elif defined CONFIG_VIDEO_VGA_VIA_LCD
+	sunxi_display.monitor = sunxi_monitor_vga;
 #else
 	sunxi_display.monitor = sunxi_monitor_lcd;
 #endif
@@ -850,8 +858,13 @@ void *video_hw_init(void)
 		printf("LCD not supported on this board\n");
 		return NULL;
 	case sunxi_monitor_vga:
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD
+		sunxi_display.depth = 18;
+		break;
+#else
 		printf("VGA not supported on this board\n");
 		return NULL;
+#endif
 	}
 
 	if (mode->vmode != FB_VMODE_NONINTERLACED) {
@@ -904,6 +917,7 @@ int sunxi_simplefb_setup(void *blob)
 		pipeline = "de_be0-lcd0";
 		break;
 	case sunxi_monitor_vga:
+		pipeline = "de_be0-lcd0";
 		break;
 	}
 
-- 
2.1.0